Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
en:device_api [2019/09/17 10:59]
en:device_api [2024/02/27 13:42] (current)
Line 1: Line 1:
 ====== Device API ====== ====== Device API ======
  
-API that controls the device information or upgrade ​the firmware.\\+API that controls the device information or upgrades ​the firmware.\\
  
   * [[BS2_GetDeviceInfo]]:​ Gets the device information.   * [[BS2_GetDeviceInfo]]:​ Gets the device information.
Line 21: Line 21:
   * [[BS2_RemoveAuthOperatorLevelEx]]:​ [+ 2.6.3] Removes specified device operator. (Support operator up to 1000)   * [[BS2_RemoveAuthOperatorLevelEx]]:​ [+ 2.6.3] Removes specified device operator. (Support operator up to 1000)
   * [[BS2_RemoveAllAuthOperatorLevelEx]]:​ [+ 2.6.3] Removes all device operators. (Support operator up to 1000)   * [[BS2_RemoveAllAuthOperatorLevelEx]]:​ [+ 2.6.3] Removes all device operators. (Support operator up to 1000)
 +  * [[BS2_GetDeviceCapabilities]]:​ [+ 2.8] Gets available function information of the device.
 ===== Structure ===== ===== Structure =====
 ==== BS2SimpleDeviceInfo ==== ==== BS2SimpleDeviceInfo ====
Line 66: Line 67:
 <WRAP group 50%> <WRAP group 50%>
 ^Value ​ ^Description ​ ^ ^Value ​ ^Description ​ ^
 +|0x00  |Unknown Type  |
 |0x01  |BioEntry Plus  | |0x01  |BioEntry Plus  |
 |0x02  |BioEntry W  | |0x02  |BioEntry W  |
Line 79: Line 81:
 |0x0C  |BioStation L2  | |0x0C  |BioStation L2  |
 |0x0D  |BioEntry W2  | |0x0D  |BioEntry W2  |
-|0x0E  |CoreStation ​​ +|0x0E  |CoreStation ​40  ​
-|0x0F  |Output Module| +|0x0F  |Output Module ​ 
-|0x10  |Input Module| +|0x10  |Input Module ​ 
-|0x11  |BioEntry P2| +|0x11  |BioEntry P2  
-|0x0F  |OM-120  |+|0x12  |BioLite N2  | 
 +|0x13  |XPass2 ​ | 
 +|0x14  |XPass S3  | 
 +|0x15  |BioEntry R2  | 
 +|0x16  |XPass D2  | 
 +|0x17  |Door Module 21  | 
 +|0x18  |XPass D2 Keypad ​ | 
 +|0x19  |FACELITE ​ | 
 +|0x1A  |XPass2 Keypad ​ | 
 +|0x1B  |XPass D2 Revision ​ | 
 +|0x1C  |XPass D2 Keypad Revision ​ | 
 +|0x1D  |FaceStation F2 Finger ​ | 
 +|0x1E  |FaceStation F2  | 
 +|0x1F  |XStation 2 QR  | 
 +|0x20  |XStation 2  | 
 +|0x21  |Input Module ​120  | 
 +|0x22  |XStation 2 Finger ​ | 
 +|0x23  |BioStation 3  | 
 +|0x24  |3rd party OSDP device ​ | 
 +|0x25  |3rd party OSDP IO device ​ | 
 +|0x26  |BioStation 2a  |
 </​WRAP>​ </​WRAP>​
  
Line 177: Line 199:
     enum     enum
     {     {
-        BS2_SUPPORT_RS485EX = 0x00000001,​ +        BS2_SUPPORT_RS485EX ​ = 0x00000001,​ 
-        BS2_SUPPORT_CARDEX ​ = 0x00000002,​ +        BS2_SUPPORT_CARDEX ​  = 0x00000002,​ 
-        BS2_SUPPORT_DST ​    ​= 0x00000004,​ +        BS2_SUPPORT_DST ​    = 0x00000004,​ 
-        ​BS2_SUPPORT_ALL ​    BS2_SUPPORT_RS485EX | BS2_SUPPORT_CARDEX | BS2_SUPPORT_DST+        ​BS2_SUPPORT_DESFIREEX 0x00000008
-    };+        ​BS2_SUPPORT_FACE_EX = 0x00000010,​ 
 +        BS2_SUPPORT_QR ​     = 0x00000020,
  
 +        BS2_SUPPORT_FINGER_SCAN = 0x00010000,
 +        BS2_SUPPORT_FACE_SCAN = 0x00020000,
 +        BS2_SUPPORT_FACE_EX_SCAN = 0x00040000,
 +        BS2_SUPPORT_QR_SCAN ​    = 0x00080000,
 +
 +        BS2_SUPPORT_ALL ​     = BS2_SUPPORT_RS485EX |
 +   BS2_SUPPORT_CARDEX |
 +   BS2_SUPPORT_DST |
 +   BS2_SUPPORT_DESFIREEX |
 +   BS2_SUPPORT_FACE_EX |
 +   BS2_SUPPORT_QR |
 +   BS2_SUPPORT_FINGER_SCAN |
 +   BS2_SUPPORT_FACE_SCAN |
 +   BS2_SUPPORT_FACE_EX_SCAN |
 +   BS2_SUPPORT_QR_SCAN,​
 +    };
     uint32_t supported;     uint32_t supported;
     uint8_t ​ reserved[4];​     uint8_t ​ reserved[4];​
Line 191: Line 230:
 The current device additionally obtains information beyond the functionality provided by BS2SimpleDeviceInfo.\\ The current device additionally obtains information beyond the functionality provided by BS2SimpleDeviceInfo.\\
 By bit masking with the values defined below, you can check if it is supported. By bit masking with the values defined below, you can check if it is supported.
-<WRAP group 50%>+<WRAP group 80%>
 ^Definition ​ ^Value ​ ^Description ​ ^ ^Definition ​ ^Value ​ ^Description ​ ^
 |BS2_SUPPORT_RS485EX ​ |0x00000001 ​ |Whether RS485 extensions are supported (In case of CoreStation 40)  | |BS2_SUPPORT_RS485EX ​ |0x00000001 ​ |Whether RS485 extensions are supported (In case of CoreStation 40)  |
 |BS2_SUPPORT_CARDEX ​ |0x00000002 ​ |Whether iClass SEOS card is used  | |BS2_SUPPORT_CARDEX ​ |0x00000002 ​ |Whether iClass SEOS card is used  |
 |BS2_SUPPORT_DST ​ |0x00000004 ​ |Whether daylight savings time is used | |BS2_SUPPORT_DST ​ |0x00000004 ​ |Whether daylight savings time is used |
-|BS2_SUPPORT_ALL ​ |0x00000007 ​ ​|Whether to provide additional full information |+|BS2_SUPPORT_DESFIREEX |0x00000008 |Whether DesFire advanced setting is supported [+2.6.4] | 
 +|BS2_SUPPORT_FACE_EX |0x00000010 |Whether support face matching for FSF2 [+ V2.7.1] | 
 +|BS2_SUPPORT_QR |0x00000020 |Whether support QR matching ''​XStation 2 QR''​ [+ V2.8.0] | 
 +|BS2_SUPPORT_FINGER_SCAN |0x00010000 |Whether support fingerprint scan [+ V2.7.1] | 
 +|BS2_SUPPORT_FACE_SCAN |0x00020000 |Whether support face scan for FS2 and FL [+ V2.7.1] | 
 +|BS2_SUPPORT_FACE_EX_SCAN |0x00040000 |Whether support face scan for FSF2 [+ V2.7.1] | 
 +|BS2_SUPPORT_QR_SCAN |0x00080000 |Whether support QR scan ''​XStation 2''​ [+ V2.8.0] | 
 +|BS2_SUPPORT_ALL ​ |0x000FFFFF ​ ​|Whether to provide additional full information |
 </​WRAP>​ </​WRAP>​
  
Line 219: Line 265:
 <WRAP group 100%> <WRAP group 100%>
 ^Value ​ ^Description ​ ^Supported data format ​ ^ ^Value ​ ^Description ​ ^Supported data format ​ ^
-|0  |UI(Langauge ​pack)  |Suprema language pack |+|0  |UI(Language ​pack)  |Suprema language pack |
 |1  |Notice message ​ | UTF-8 string | |1  |Notice message ​ | UTF-8 string |
 |2  |Image(Background) ​ | PNG | |2  |Image(Background) ​ | PNG |
Line 270: Line 316:
 IPv6 addresses currently allocated to device. IPv6 addresses currently allocated to device.
  
-==== BS2AuthOperator ​====+==== BS2AuthOperatorLevel ​====
 <code cpp> <code cpp>
 typedef struct { typedef struct {
Line 292: Line 338:
 </​WRAP>​ </​WRAP>​
 3. //​reserved//​ \\  3. //​reserved//​ \\ 
-Reserved space \\ +Reserved space \\ \\
  
 +
 +
 +==== BS2DeviceCapabilities ====
 +''​[+ 2.8]''​
 +<code cpp>
 +typedef struct {
 +    uint32_t maxUsers; ​               ///< 4 bytes
 +    uint32_t maxEventLogs; ​           ///< 4 bytes
 +    uint32_t maxImageLogs; ​           ///< 4 bytes
 +    uint32_t maxBlacklists; ​          ///<​ 4 bytes
 +    uint32_t maxOperators; ​           ///< 4 bytes
 +    uint32_t maxCards; ​               ///< 4 bytes
 +    uint32_t maxFaces; ​               ///< 4 bytes
 +    uint32_t maxFingerprints; ​        ///<​ 4 bytes
 +    uint32_t maxUserNames; ​           ///< 4 bytes
 +    uint32_t maxUserImages; ​          ///<​ 4 bytes
 +    uint32_t maxUserJobs; ​            ///<​ 4 bytes
 +    uint32_t maxUserPhrases; ​         ///< 4 bytes
 +    uint8_t maxOutputPorts; ​          ///<​ 1 byte
 +    uint8_t maxRelays; ​               ///< 1 byte
 +    uint8_t maxRS485Channels; ​        ///<​ 1 byte
 +
 +    uint8_t cameraSupported:​ 1;
 +    uint8_t tamperSupported:​ 1;
 +    uint8_t wlanSupported:​ 1;
 +    uint8_t displaySupported:​ 1;
 +    uint8_t thermalSupported:​ 1;
 +    uint8_t maskSupported:​ 1;
 +    uint8_t faceExSupported:​ 1;
 +    uint8_t unused: 1;
 +
 +    union {
 +        uint32_t mask;                ///< 4 bytes
 +        struct {
 +            uint32_t EM: 1;
 +            uint32_t HIDProx: 1;
 +            uint32_t MifareFelica:​ 1;
 +            uint32_t iClass: 1;
 +            uint32_t ClassicPlus:​ 1;
 +            uint32_t DesFireEV1: 1;
 +            uint32_t SRSE: 1;
 +            uint32_t SEOS: 1;
 +            uint32_t NFC: 1;
 +            uint32_t BLE: 1;
 +            uint32_t CustomClassicPlus:​ 1;
 +            uint32_t CustomDesFireEV1:​ 1;
 +            uint32_t TOM_NFC: 1;
 +            uint32_t TOM_BLE: 1;
 +            uint32_t CustomFelica:​ 1;
 +            uint32_t reserved: 16;
 +            uint32_t useCardOperation:​ 1;
 +        };
 +    } cardSupported;​
 +
 +    struct {
 +        BS2_BOOL extendedMode; ​       ///< 1 byte
 +        union {
 +            uint8_t mask;             ///<​ 1 byte
 +            struct {
 +                uint8_t card: 1;
 +                uint8_t fingerprint:​ 1;
 +                uint8_t face: 1;
 +                uint8_t id: 1;
 +                uint8_t pin: 1;
 +                uint8_t reserved: 3;
 +            };
 +        } credentials;​
 +        uint8_t reserved[2]; ​         ///< 2 bytes
 +        union {
 +            struct {
 +                union {
 +                    uint8_t mask;     ///<​ 1 byte
 +                    struct {
 +                        uint8_t biometricOnly:​ 1;
 +                        uint8_t biometricPIN:​ 1;
 +                        uint8_t unused: 6;
 +                    };
 +                } biometricAuth;​
 +
 +                union {
 +                    uint8_t mask;     ///<​ 1 byte
 +                    struct {
 +                        uint8_t cardOnly: 1;
 +                        uint8_t cardBiometric:​ 1;
 +                        uint8_t cardPIN: 1;
 +                        uint8_t cardBiometricOrPIN:​ 1;
 +                        uint8_t cardBiometricPIN:​ 1;
 +                        uint8_t unused: 3;
 +                    };
 +                } cardAuth;
 +
 +                union {
 +                    uint8_t mask;     ///<​ 1 byte
 +                    struct {
 +                        uint8_t idBiometric:​ 1;
 +                        uint8_t idPIN: 1;
 +                        uint8_t idBiometricOrPIN:​ 1;
 +                        uint8_t idBiometricPIN:​ 1;
 +                        uint8_t unused: 4;
 +                    };
 +                } idAuth;
 +            } legacy;
 +
 +            struct {
 +                union {
 +                    uint32_t mask;    ///< 4 bytes
 +                    struct {
 +                        uint32_t faceOnly: 1;
 +                        uint32_t faceFingerprint:​ 1;
 +                        uint32_t facePIN: 1;
 +                        uint32_t faceFingerprintOrPIN:​ 1;
 +                        uint32_t faceFingerprintPIN:​ 1;
 +                        uint32_t unused: 27;
 +                    };
 +                } faceAuth;
 +
 +                union {
 +                    uint32_t mask;    ///< 4 bytes
 +                    struct {
 +                        uint32_t fingerprintOnly:​ 1;
 +                        uint32_t fingerprintFace:​ 1;
 +                        uint32_t fingerprintPIN:​ 1;
 +                        uint32_t fingerprintFaceOrPIN:​ 1;
 +                        uint32_t fingerprintFacePIN:​ 1;
 +                        uint32_t unused: 27;
 +                    };
 +                } fingerprintAuth;​
 +
 +                union {
 +                    uint32_t mask;    ///< 4 bytes
 +                    struct {
 +                        uint32_t cardOnly: 1;
 +                        uint32_t cardFace: 1;
 +                        uint32_t cardFingerprint:​ 1;
 +                        uint32_t cardPIN: 1;
 +                        uint32_t cardFaceOrFingerprint:​ 1;
 +                        uint32_t cardFaceOrPIN:​ 1;
 +                        uint32_t cardFingerprintOrPIN:​ 1;
 +                        uint32_t cardFaceOrFingerprintOrPIN:​ 1;
 +                        uint32_t cardFaceFingerprint:​ 1;
 +                        uint32_t cardFacePIN:​ 1;
 +                        uint32_t cardFingerprintFace:​ 1;
 +                        uint32_t cardFingerprintPIN:​ 1;
 +                        uint32_t cardFaceOrFingerprintPIN:​ 1;
 +                        uint32_t cardFaceFingerprintOrPIN:​ 1;
 +                        uint32_t cardFingerprintFaceOrPIN:​ 1;
 +                        uint32_t unused: 17;
 +                    };
 +                } cardAuth;
 +
 +                union {
 +                    uint32_t mask;    ///< 4 bytes
 +                    struct {
 +                        uint32_t idFace: 1;
 +                        uint32_t idFingerprint:​ 1;
 +                        uint32_t idPIN: 1;
 +                        uint32_t idFaceOrFingerprint:​ 1;
 +                        uint32_t idFaceOrPIN:​ 1;
 +                        uint32_t idFingerprintOrPIN:​ 1;
 +                        uint32_t idFaceOrFingerprintOrPIN:​ 1;
 +                        uint32_t idFaceFingerprint:​ 1;
 +                        uint32_t idFacePIN: 1;
 +                        uint32_t idFingerprintFace:​ 1;
 +                        uint32_t idFingerprintPIN:​ 1;
 +                        uint32_t idFaceOrFingerprintPIN:​ 1;
 +                        uint32_t idFaceFingerprintOrPIN:​ 1;
 +                        uint32_t idFingerprintFaceOrPIN:​ 1;
 +                        uint32_t unused: 18;
 +                    };
 +                } idAuth;
 +            } extended;
 +        };
 +    } authSupported;​
 +
 +    uint8_t intelligentPDSupported:​ 1;
 +    uint8_t updateUserSupported:​ 1;
 +    uint8_t simulatedUnlockSupported:​ 1;
 +    uint8_t smartCardByteOrderSupported:​ 1;
 +    uint8_t treatAsCSNSupported:​ 1;
 +    uint8_t rtspSupported:​ 1;
 +    uint8_t lfdSupported:​ 1;
 +    uint8_t visualQRSupported:​ 1;
 +
 +    uint8_t maxVoipExtensionNumbers;​ ///<​ 1 byte
 +
 +    uint8_t osdpStandardCentralSupported : 1; ///< 1 byte
 +    uint8_t enableLicenseFuncSupported : 1;   ///<​ 1 byte
 +    uint8_t keypadBacklightSupported:​ 1;
 +    uint8_t uzWirelessLockDoorSupported:​ 1;
 +    uint8_t customSmartCardSupported:​ 1; 
 +    uint8_t tomSupported:​ 1;
 +    uint8_t tomEnrollSupported:​ 1;
 +    uint8_t showOsdpResultbyLED:​ 1;
 +
 +    uint8_t customSmartCardFelicaSupported:​ 1;
 +    uint8_t ignoreInputAfterWiegandOut:​ 1;
 +    uint8_t setSlaveBaudrateSupported:​ 1;
 +    uint8_t unused: 5;
 +
 +    uint16_t visualFaceTemplateVersion;​
 +    uint8_t unused2[2];
 +
 +    uint8_t reserved[424];​
 +} BS2DeviceCapabilities;​
 +</​code>​
 +1. //​maxUsers//​ \\
 +Indicates the maximum number of information that can be stored on the device. (User) \\ \\
 +2. //​maxEventLogs//​ \\
 +Indicates the maximum number of information that can be stored on the device. (Event log) \\ \\
 +3. //​maxImageLogs//​ \\
 +Indicates the maximum number of information that can be stored on the device. (Image log) \\ \\
 +4. //​maxBlacklists//​ \\
 +Indicates the maximum number of information that can be stored on the device. (Blacklist) \\ \\
 +5. //​maxOperators//​ \\
 +Indicates the maximum number of information that can be stored on the device. (Operator) \\ \\
 +6. //​maxCards//​ \\
 +Indicates the maximum number of information that can be stored on the device. (Card) ​ \\ \\
 +7. //​maxFaces//​ \\
 +Indicates the maximum number of information that can be stored on the device. (Face) \\ \\
 +8. //​maxFingerprints//​ \\
 +Indicates the maximum number of information that can be stored on the device. (Fingerprint) \\ \\
 +9. //​maxUserNames//​ \\
 +Indicates the maximum number of information that can be stored on the device. (Username) \\ \\
 +10. //​maxUserImages//​ \\
 +Indicates the maximum number of information that can be stored on the device. (user image) \\ \\
 +11. //​maxUserJobs//​ \\
 +Indicates the maximum number of information that can be stored on the device. (Job code) \\ \\
 +12. //​maxUserPhrases//​ \\
 +Indicates the maximum number of information that can be stored on the device. (User phrase) \\ \\
 +13. //​maxCardsPerUser//​ \\
 +Indicates the maximum number of information that can be stored on the device. (Card per user) \\ \\
 +14. //​maxFacesPerUser//​ \\
 +Indicates the maximum number of information that can be stored on the device. (Face per user) \\ \\
 +15. //​maxFingerprintsPerUser//​ \\
 +Indicates the maximum number of information that can be stored on the device. (Fingerprint per user) \\ \\
 +16. //​maxInputPorts//​ \\
 +Indicates the maximum number of information that can be stored on the device. (input port of device) \\ \\
 +17. //​maxOutputPorts//​ \\
 +Indicates the maximum number of information that can be stored on the device. (output port of device) \\ \\
 +18. //​maxRelays//​ \\
 +Indicates the maximum number of information that can be stored on the device. (relay on device) \\ \\
 +19. //​maxRS485Channels//​ \\
 +Indicates the maximum number of information that can be stored on the device. (RS485 channel) \\ \\
 +20. //System support information//​ \\
 +It indicates the system information supported by the device in bit units as follows. \\
 +^Bit position ​ ^Number of bit  ^Member ​ ^Description ​ ^
 +|0  |1  |cameraSupported ​ |Camera Support or not  |
 +|1  |1  |tamperSupported ​ |Tamper Support or not  |
 +|2  |1  |wlanSupported ​ |WLAN Support or not  |
 +|3  |1  |displaySupported ​ |Available LCD or not  |
 +|4  |1  |thermalSupported ​ |TCM 10 (Thermal Detection) Support or not  |
 +|5  |1  |maskSupported ​ |Mask Detection Support or not  |
 +|6  |1  |faceExSupported ​ |Visual Face device such as FaceStation F2 or not  |
 +|7  |1  |unused ​ |Unassigned ​ |
 +21. //​cardSupported//​ \\
 +This indicates the card support relevant. Referring to mask value, you can access each item in its entirety or in bit units. \\
 +^Bit position ​ ^Number of bit  ^Member ​ ^Description ​ ^
 +|-  |Total ​ |mask  | total Information ​ |
 +|0  |1  |EM  |EM Card  |
 +|1  |1  |HIDProx ​ |HID Proximity Card  |
 +|2  |1  |MifareFelica ​ |MIFARE / FeliCa ​ |
 +|3  |1  |iClass ​ |iClass Card  |
 +|4  |1  |ClassicPlus ​ |Classic plus Card  |
 +|5  |1  |DesFireEV1 ​ |DESFire EV1  |
 +|6  |1  |SRSE  |iClass SR, iClass SE  |
 +|7  |1  |SEOS  |iClass SEOS  |
 +|8  |1  |NFC  |NFC Card  |
 +|9  |1  |BLE  |BLE  |
 +|10 |1  |ClassicPlus(Custom card)  |ClassicPlus(Custom Card)  |
 +|11 |1  |DesFireEV1(Custom card)  |DesFireEV1(Custom Card)  |
 +|12 |1  |TOM NFC  |TOM NFC  |
 +|13 |1  |TOM BLE  |TOM BLE  |
 +|14 |1  |FeliCa(Custom card)  | FeliCa (Custom Card)  |
 +|15 |16 |reserved ​ |Unassigned ​ |
 +|31 |1  |useCardOperation ​ |Card operation enabled or not  |
 +22. //​authSupported//​ \\
 +This indicates support information related to authentication. \\ \\
 +23. //​extendedMode//​ \\
 +If true, extended authentication mode is supported, refer to authSupported.extended. \\
 +If false, non-extended authentication mode is supported, refer to authSupported.lagacy. \\ \\
 +24. //​credentials//​ \\
 +This indicates supported authentication methods. You can access each item in its entirety or in bit units as a mask value. \\
 +^Bit position ​ ^Number of bit  ^Member ​ ^Description ​ ^
 +|-  |Total ​ |mask  |Total Information ​ |
 +|0  |1  |card  |Card  |
 +|1  |1  |fingerprint ​ |Fingerprint ​ |
 +|2  |1  |face  |Face  |
 +|3  |1  |id  |ID  |
 +|4  |1  |pin  |PIN  |
 +|5  |3  |reserved ​ |Unassgined ​ |
 +25. //​reserved//​ \\ 
 +Reserved space.\\ \\ 
 +26. //legacy// \\
 +Information referenced when non-extended authentication mode is supported. \\ \\
 +27. //​biometricAuth//​ \\
 +(Non-extended authentication mode) Indicates the biometric authentication combination. \\
 +^Bit position ​ ^Number of bit  ^Member ​ ^Description ​ ^
 +|-  |Total ​ |mask  |Total Information ​ |
 +|0  |1  |biometricOnly ​ |Biometric only  |
 +|1  |1  |biometricPIN ​ |Biometric + PIN  |
 +|2  |6  |unused ​ |Unassigned ​ |
 +28. //​cardAuth//​ \\
 +(Non-extended authentication mode) Indicates the card authentication combination. \\
 +^Bit position ​ ^Number of bit  ^Member ​ ^Description ​ ^
 +|-  |Total ​ |mask  |Total Information ​ |
 +|0  |1  |cardOnly ​ |Card only  |
 +|1  |1  |cardBiometric ​ |Card + Biometric ​ |
 +|2  |1  |cardPIN ​ |Card + PIN  |
 +|3  |1  |cardBiometricOrPIN ​ |Card + Biometric/​PIN ​ |
 +|4  |1  |cardBiometricPIN ​ |Card + Biometric + PIN  |
 +|5  |3  |unused ​ |Unassigned ​ |
 +29. //idAuth// \\
 +(Non-extended authentication mode) Indicates the ID authentication combination. \\
 +^Bit position ​ ^Number of bit  ^Member ​ ^Description ​ ^
 +|-  |Total ​ |mask  |Total Information ​ |
 +|0  |1  |idBiometric ​ |ID + Biometric ​ |
 +|1  |1  |idPIN ​ |ID + PIN  |
 +|2  |1  |idBiometricOrPIN ​ |ID + Biometric/​PIN ​ |
 +|3  |1  |idBiometricPIN ​ |ID + Biometric + PIN  |
 +|4  |4  |unused ​ |Unassigned ​ |
 +30. //​extended//​ \\
 +This information is referenced when supporting extended authentication mode. \\ \\
 +31. //​faceAuth//​ \\
 +(Extended authentication mode) Indicates the face authentication combination. \\
 +^Bit position ​ ^Number of bit  ^Member ​ ^Description ​ ^
 +|-  |Total ​ |mask  |Total Information ​ |
 +|0  |1  |faceOnly ​ |Face only  |
 +|1  |1  |faceFingerprint ​ |Face + Fingerprint ​ |
 +|2  |1  |facePIN ​ |Face + PIN  |
 +|3  |1  |faceFingerprintOrPIN ​ |Face + Fingerprint/​PIN ​ |
 +|4  |1  |faceFingerprintPIN ​ |Face + Fingerprint + PIN  |
 +|5  |27 |unused ​ |Unassigned ​ |
 +32. //​fingerprintAuth//​ \\
 +(Extended authentication mode) Indicates a combination of fingerprint authentication. \\
 +^Bit position ​ ^Number of bit  ^Member ​ ^Description ​ ^
 +|-  |Total ​ |mask  |Total Information ​ |
 +|0  |1  |fingerprintOnly ​ |Fingerprint only  |
 +|1  |1  |fingerprintFace ​ |Fingerprint + Face  |
 +|2  |1  |fingerprintPIN ​ |Fingerprint + PIN  |
 +|3  |1  |fingerprintFaceOrPIN ​ |Fingerprint + Face/​PIN ​ |
 +|4  |1  |fingerprintFacePIN ​ |Fingerprint + Face + PIN  |
 +|5  |27 |unused ​ |Unassigned ​ |
 +33. //​cardAuth//​ \\
 +(Extended authentication mode) Indicates the card authentication combination. \\
 +^Bit position ​ ^Number of bit  ^Member ​ ^Description ​ ^
 +|-  |Total ​ |mask  |Total Information ​ |
 +|0  |1  |cardOnly ​ |Card only  |
 +|1  |1  |cardFace ​ |Card + Face  |
 +|2  |1  |cardFingerprint ​ |Card + Fingerprint ​ |
 +|3  |1  |cardPIN ​ |Card + PIN  |
 +|4  |1  |cardFaceOrFingerprint ​ |Card + Face/​Fingerprint ​ |
 +|5  |1  |cardFaceOrPIN ​ |Card + Face/​PIN ​ |
 +|6  |1  |cardFingerprintOrPIN ​ |Card + Fingerprint/​PIN ​ |
 +|7  |1  |cardFaceOrFingerprintOrPIN ​ |Card + Face/​Fingerprint/​PIN ​ |
 +|8  |1  |cardFaceFingerprint ​ |Card + Face + Fingerprint ​ |
 +|9  |1  |cardFacePIN ​ |Card + Face + PIN  |
 +|10 |1  |cardFingerprintFace ​ |Card + Fingerprint + Face  |
 +|11 |1  |cardFingerprintPIN ​ |Card + Fingerprint + PIN  |
 +|12 |1  |cardFaceOrFingerprintPIN ​ |Card + Face/​Fingerprint + PIN  |
 +|13 |1  |cardFaceFingerprintOrPIN ​ |Card + Face + Fingerprint/​PIN ​ |
 +|14 |1  |cardFingerprintFaceOrPIN ​ |Card + Fingerprint + Face/​PIN ​ |
 +|15 |17 |unused ​ |Unassigned ​ |
 +34. //idAuth// \\
 +(Extended authentication mode) Indicates the ID authentication combination. \\
 +^Bit position ​ ^Number of bit  ^Member ​ ^Description ​ ^
 +|-  |Total ​ |mask  |Total Information ​ |
 +|1  |1  |idFace ​ |ID + Face  |
 +|2  |1  |idFingerprint ​ |ID + Fingerprint ​ |
 +|3  |1  |idPIN ​ |ID + PIN  |
 +|4  |1  |idFaceOrFingerprint ​ |ID + Face/​Fingerprint ​ |
 +|5  |1  |idFaceOrPIN ​ |ID + Face/​PIN ​ |
 +|6  |1  |idFingerprintOrPIN ​ |ID + Fingerprint/​PIN ​ |
 +|7  |1  |idFaceOrFingerprintOrPIN ​ |ID + Face/​Fingerprint/​PIN ​ |
 +|8  |1  |idFaceFingerprint ​ |ID + Face + Fingerprint ​ |
 +|9  |1  |idFacePIN ​ |ID + Face + PIN  |
 +|10 |1  |idFingerprintFace ​ |ID + Fingerprint + Face  |
 +|11 |1  |idFingerprintPIN ​ |ID + Fingerprint + PIN  |
 +|12 |1  |idFaceOrFingerprintPIN ​ |ID + Face/​Fingerprint + PIN  |
 +|13 |1  |idFaceFingerprintOrPIN ​ |ID + Face + Fingerprint/​PIN ​ |
 +|14 |1  |idFingerprintFaceOrPIN ​ |ID + Fingerprint + Face/​PIN ​ |
 +|15 |18 |unused ​ |Unassigned ​ |
 +35. //System support information//​ \\
 +It indicates the system information supported by the device in bit units as follows. \\
 +^Bit position ​ ^Number of bit  ^Member ​ ^Description ​ ^
 +|0  |1  |intelligentPDSupported ​ |Whether Intelligent PD is supported. ([[configuration api#​BS2Rs485Config|BS2Rs485Config]]) ​ |
 +|1  |1  |updateUserSupported ​ |Whether User information update is supported. ​ |
 +|2  |1  |simulatedUnlockSupported ​ |Whether simulated button unlock is supported. ​ |
 +|3  |1  |smartCardByteOrderSupported ​ |Whether smartCardByteOrder is supported. ([[configuration api#​BS2CardConfig|BS2CardConfig]]) ​ |
 +|4  |1  |treatAsCSNSupported ​ |Whether treatAsCSN is supported. ([[configuration api#​BS2BarcodeConfig|BS2BarcodeConfig]]) ​ |
 +|5  |1  |rtspSupported ​ |Whether RTSP is supported. ([[configuration api#​BS2RtspConfig|BS2RtspConfig]]) ​ |
 +|6  |1  |lfdSupported ​ |Whether LFD is supported. ​ |
 +|7  |1  |visualQRSupported ​ |Whether Visual QR is supported. ​ |
 +36. //​maxVoipExtensionNumbers//​ \\ 
 +It is the number of registered internal numbers in the extension phone book at the extended VoIP setting information.\\ \\ 
 +37. //System support information 2// \\
 +It indicates the system information supported by the device in bit units as follows. \\
 +^Bit position ​ ^Number of bit  ^Member ​ ^Description ​ ^
 +|0  |1  |osdpStandardCentralSupported ​ |Whether OSDP Standard is supported. ([[configuration_api#​BS2OsdpStandardConfig|BS2OsdpStandardConfig]]) ​ |
 +|1  |1  |enableLicenseFuncSupported ​ |Whether Device license is supported.([[configuration_api#​BS2LicenseConfig|BS2LicenseConfig]]) ​ |
 +|2  |1  |keypadBacklightSupported ​ |Whether Keypad backlight is supported. ​ |
 +|3  |1  |uzWirelessLockDoorSupported ​ |Whether U&Z wireless lock is supported. ​ |
 +|4  |1  |customSmartCardSupported ​ |Whether Custom card is supported. ([[configuration_api#​BS2CustomCardConfig|BS2CustomCardConfig]]) ​ |
 +|5  |1  |tomSupported ​ |Whether ToM is supported. ​ |
 +|6  |1  |tomEnrollSupported ​ |Whether ToM enrollment is supported. ​ |
 +|7  |1  |showOsdpResultbyLED ​ |Whether OSDP standard device supports the ability to display authentication results. ([[configuration_api#​BS2DisplayConfig|BS2DisplayConfig]]) ​ |
 +38. //System support information 3// \\
 +It indicates the system information supported by the device in bit units as follows. \\
 +^Bit position ​ ^Number of bit  ^Member ​ ^Description ​ ^
 +|0  |1  |customSmartCardFelicaSupported ​ |Whether FeliCa custom smart card is supported. ​ |
 +|1  |1  |ignoreInputAfterWiegandOut ​ |Whether a feature to filter out repetitive re-entry of Wiegand output results is included. ​ |
 +|2  |1  |setSlaveBaudrateSupported ​ |Whether to support baudrate setting of RS485 slave device. ​ |
 +|3  |5  |unused ​ |Unassigned ​ | 
 +39. //​visualFaceTemplateVersion//​ \\
 +For visual face devices, indicates template version information supported/​processed by the device. \\ \\
 +40. //unused2// \\
 +Reserved space.\\ \\
 +41. //​reserved//​ \\ 
 +Reserved space.\\ \\