Differences

This shows you the differences between two versions of the page.

--- en:configuration_api [2019/05/28 11:50]
yjjung [Configuration API]
+++ en:configuration_api [2020/02/19 14:13]
yjjung [BS2FingerprintConfig]
@@ Line 57: / Line 57: @@
   * [[BS2_GetCardConfigEx]]: Retrieves iClass SEOS card settings from the device.
   * [[BS2_SetCardConfigEx]]: Stores iClass SEOS card settings on the device.
-  * [[BS2_GetDstConfig]]: Gets the device DST information.
+  * [[BS2_GetDstConfig]]: Retrieves the device DST information.
-  * [[BS2_SetDstConfig]]: Sets the device DST information.
+  * [[BS2_SetDstConfig]]: Stores the device DST information.
-  * [[BS2_GetIPConfigViaUDPEx]]: [+ 2.6.3] IP 설정 정보를 UDP broadcasting를 통해 가져옵니다. (host ip 지정)
+  * [[BS2_GetSupportedConfigMask]]: Retrieves supported configuration of the device.
-  * [[BS2_SetIPConfigViaUDPEx]]: [+ 2.6.3] IP 설정 정보를 UDP broadcasting를 통해 저장합니다. (host ip 지정)
+  * [[BS2_GetIPConfigViaUDPEx]]: [+ 2.6.3] Retrieves IP configuration through UDP broadcast with host IP.
-  * [[BS2_GetIPV6Config]]: [+ 2.6.3] IP V6 설정 정보를 가져옵니다.
+  * [[BS2_SetIPConfigViaUDPEx]]: [+ 2.6.3] Stores IP configuration through UDP broadcast with host IP.
-  * [[BS2_SetIPV6Config]]: [+ 2.6.3] IP V6 설정 정보를 저장합니다.
+  * [[BS2_GetIPV6Config]]: [+ 2.6.3] Retrieves IPv6 configuration information.
-  * [[BS2_GetIPV6ConfigViaUDP]]: [+ 2.6.3] IP V6 설정 정보를 UDP broadcasting를 통해 가져옵니다.
+  * [[BS2_SetIPV6Config]]: [+ 2.6.3] Stores IPv6 configuration information.
-  * [[BS2_SetIPV6ConfigViaUDP]]: [+ 2.6.3] IP V6 설정 정보를 UDP broadcasting를 통해 저장합니다.
+  * [[BS2_GetIPV6ConfigViaUDP]]: [+ 2.6.3] Retrieves IPv6 configuration through UDP broadcast.
-  * [[BS2_GetIPV6ConfigViaUDPEx]]: [+ 2.6.3] IP V6 설정 정보를 UDP broadcasting를 통해 가져옵니다. (host ip 지정)
+  * [[BS2_SetIPV6ConfigViaUDP]]: [+ 2.6.3] Stores IPv6 configuration through UDP broadcast.
-  * [[BS2_SetIPV6ConfigViaUDPEx]]: [+ 2.6.3] IP V6 설정 정보를 UDP broadcasting를 통해 저장합니다. (host ip 지정)
+  * [[BS2_GetIPV6ConfigViaUDPEx]]: [+ 2.6.3] Retrieves IPv6 configuration through UDP broadcast with host IP.
+  * [[BS2_SetIPV6ConfigViaUDPEx]]: [+ 2.6.3] Stores IPv6 configuration through UDP broadcast with host IP.
+  * [[BS2_GetDesFireCardConfigEx]]: [+ V2.6.4] Retrieves DesFire advanced configuration from the device.
+  * [[BS2_SetDesFireCardConfigEx]]: [+ V2.6.4] Sets DesFire advanced configuration in the device.
 \\
 ===== Structure =====
@@ Line 135: / Line 138: @@
     uint32_t cameraFrequency;
     bool secureTamper;
-private:
+    bool reserved0;     // (write protected)
-    bool tamperOn;     // (write protected)
+    uint8_t reserved[2];
-    uint8_t reserved[2];
+    uint32_t useCardOperationMask;
-    uint8_t reserved2[20];
+    uint8_t reserved2[16];
 } BS2SystemConfig;
 </code>
@@ Line 172: / Line 175: @@
 Flag to determine whether to use a security tamper. \\
 When Tamper on, the following data is deleted from the device. (User, log, data encryption key, SSL certificate) \\ \\
-**13. //tamperOn//** \\
+**13. //reserved0//** \\
-The information to manage the tampering internally, which should not be set. \\
-Be sure to call [[BS2_SetSystemConfig]] after completing the necessary settings except for tamperOn after [[BS2_GetSystemConfig]]. \\ \\
-**14. //reserved1//** \\
 Reserved space. \\ \\
-**15. //reserved2//** \\
+**14. //reserved//** \\
+Reserved space. \\ \\
+**15. //useCardOperationMask//** \\
+[+ V2.6.4] Provides a card selective option not to read all kinds of cards from the device. \\
+You can select multiple cards using MASK. The user can select or deselect of a specific card reading option using this option. \\
+However, it can be applied to the card types the device supporting. If you add a card type which isn't supported from the device would be ignored. \\
+Also, the required card type MASK should be combined with ''CARD_OPERATION_USE''. \\
+For example, useCardOperationMask needs to be configured ''x0x80000001'' when EM card is selected only.
+<WRAP group 50%>
+^Value  ^Description ^
+|0xFFFFFFFF  |CARD_OPERATION_MASK_DEFAULT  |
+|0x80000000  |CARD_OPERATION_USE  |
+|0x00000200  |CARD_OPERATION_MASK_BLE  |
+|0x00000100  |CARD_OPERATION_MASK_NFC  |
+|0x00000080  |CARD_OPERATION_MASK_SEOS  |
+|0x00000040  |CARD_OPERATION_MASK_SR_SE  |
+|0x00000020  |CARD_OPERATION_MASK_DESFIRE_EV1  |
+|0x00000010  |CARD_OPERATION_MASK_CLASSIC_PLUS  |
+|0x00000008  |CARD_OPERATION_MASK_ICLASS  |
+|0x00000004  |CARD_OPERATION_MASK_MIFARE_FELICA  |
+|0x00000002  |CARD_OPERATION_MASK_HIDPROX  |
+|0x00000001  |CARD_OPERATION_MASK_EM  |
+</WRAP>
+**16. //reserved2//** \\
 Reserved space. \\ \\
@@ Line 241: / Line 264: @@
 **7. //faceDetectionLevel//** \\
 Level of face detection in user authentication. If the detected face level is lower than the configuration, it will be processed as authentication fail.\\
+When set, the camera view according to Normal/Strict is displayed, access is denied if the device doesn't recognize facial image through image log. Default is 0.
 <WRAP group 50%>
 ^Value  ^Description  ^
@@ Line 248: / Line 272: @@
 </WRAP>
 <WRAP info>
-Only valid for devices with a camera.
+Only valid for A2. Not used with FaceStation2 or FaceLite.
 </WRAP>
 **8. //useServerMatching//** \\
@@ Line 580: / Line 604: @@
     uint8_t fileID;
     uint8_t encryptionType;
-    uint8_t reserved[3];
+    uint8_t operationMode;
+    uint8_t reserved[2];
 } BS2DesFireCard;
@@ Line 626: / Line 651: @@
 File ID that is stored inside the DesFire card, which will be used by the application to read and write data.\\ \\
 **15. //encryptionType//** \\
-Type of data encryption. AES will be supported soon.\\
+Type of data encryption.\\
 <WRAP group 50%>
 ^Value  ^Description  ^
@@ Line 632: / Line 657: @@
 |1  |AES  |
 </WRAP>
-**16. //reserved//** \\
+**16. //operationMode//** \\
+Operation mode. (operationMode will be supported soon.)\\
+<WRAP group 50%>
+^Value  ^Description  ^
+|0  |Lagacy mode (Using PICC master key)  |
+|1  |New mode (Using App master key)  |
+</WRAP>
+**17. //reserved//** \\
 Reserved space.\\ \\
-**17. //byteOrder//** \\
+**18. //byteOrder//** \\
 Order of how the byte of the card is stored. When it is set as 0, will function as MSB((Most Significant Bit)). When it is set as 1, will function as LSB((Least Significant Bit)). \\ \\
-**18. //useWiegandFormat//** \\
+**19. //useWiegandFormat//** \\
 Decides whether to use Wiegand format.\\ \\
-**19. //dataType//** \\
+**20. //dataType//** \\
 Type of card data. \\
 <WRAP group 50%>
@@ Line 647: / Line 679: @@
 |3  |BCD  |
 </WRAP>
-**20. //useSecondaryKey//** \\
+**21. //useSecondaryKey//** \\
 Decides whether to use the secondary encryption key. \\ \\
-**21. //formatID//** \\
+**22. //formatID//** \\
 ID that is used when the card configuration needs to be managed from the database on the BioStar application.\\ \\
-**22. //cipher//** \\
+**23. //cipher//** \\
 Activates 'Keypad card ID' option. \\
 Default value is 0, it is only valid for XPass D2 Gangbox Keypad type. \\
@@ Line 658: / Line 690: @@
 |0  |Deactivate  |
 |1  |Activate  |
-**23. //reserved5//** \\
+**24. //reserved5//** \\
 Reserved space. \\
+</WRAP>
 ==== BS2FingerprintConfig ====
 <code cpp>
 typedef struct {
-    uint8_t securityLevel;
+    uint8_t      securityLevel;
-    uint8_t fastMode;
+    uint8_t      fastMode;
-    uint8_t sensitivity;
+    uint8_t      sensitivity;
-    uint8_t sensorMode;
+    uint8_t      sensorMode;
-    uint16_t templateFormat;
+    uint16_t     templateFormat;
-    uint16_t scanTimeout;
+    uint16_t     scanTimeout;
-    uint8_t successiveScan;
+    uint8_t      successiveScan;
-    uint8_t advancedEnrollment;
+    uint8_t      advancedEnrollment;
-    uint8_t showImage;
+    uint8_t      showImage;
-    uint8_t lfdLevel;
+    uint8_t      lfdLevel;
-    uint8_t reserved1[32];
+    bool         checkDuplicate;
+    uint8_t      reserved3[31];
 } BS2FingerprintConfig;
 </code>
@@ Line 734: / Line 769: @@
 |3  |Most Strict  |
 </WRAP>
-**11. //reserved1//** \\
+**11. //checkDuplicate//** \\
-Reserved space.
+[+ V2.6.4] If set to true, it will determine if the fingerprint is a duplicate. \\ \\
+**12. //reserved3//** \\
+Reserved space. \\ \\
 ==== BS2Rs485Config ====
@@ Line 1524: / Line 1561: @@
 <code cpp>
 typedef struct {
-	BS2_FACE_SECURITY_LEVEL       securityLevel;
+    uint8_t       securityLevel;
-	BS2_FACE_LIGHT_CONDITON       lightCondition;
+    uint8_t       lightCondition;
-	BS2_FACE_ENROLL_THRESHOLD     enrollThreshold;
+    uint8_t       enrollThreshold;
-	BS2_FACE_DETECT_SENSITIVITY   detectSensitivity;
+    uint8_t       detectSensitivity;
-	uint16_t                      enrollTimeout;
+    uint16_t      enrollTimeout;
-	uint8_t                       reserved3[32];
+    uint8_t       lfdLevel;
+    bool          quickEnrollment;
+    uint8_t       previewOption;
+    bool          checkDuplicate;
+    uint8_t       reserved[2];
+    uint8_t       reserved2[26];
 } BS2FaceConfig;
 </code>
@@ Line 1794: / Line 1838: @@
 |0xFFFFFFFF|All configuration|
 </WRAP>
+==== BS2IPV6Config ====
+<code cpp>
+enum {
+    BS2_MAX_IPV6_ALLOCATED_ADDR = 8,
+};
+typedef struct {
+    uint8_t useIPV6;
+    uint8_t reserved1;
+    uint8_t useDhcpV6;
+    uint8_t useDnsV6;
+    uint8_t reserved[1];
+    char staticIpAddressV6[BS2_IPV6_ADDR_SIZE];
+    char staticGatewayV6[BS2_IPV6_ADDR_SIZE];
+    char dnsAddrV6[BS2_IPV6_ADDR_SIZE];
+    char serverIpAddressV6[BS2_IPV6_ADDR_SIZE];
+    uint16_t serverPortV6;
+    uint16_t sslServerPortV6;
+    uint16_t portV6;
+    uint8_t numOfAllocatedAddressV6;
+    uint8_t numOfAllocatedGatewayV6;
+    uint8_t reserved[8];
+    char allocatedIpAddressV6[BS2_IPV6_ADDR_SIZE][BS2_MAX_IPV6_ALLOCATED_ADDR];
+    char allocatedGatewayV6[BS2_IPV6_ADDR_SIZE][BS2_MAX_IPV6_ALLOCATED_ADDR];
+} BS2IpConfig;
+</code>
+. //useIPV6// \\
+Flag indicating whether to use IP V6. \\ \\
+. //reserved1// \\
+Reserved space. \\ \\
+. //useDhcpV6// \\
+Flag indicating whether to use DHCP. \\ \\
+. //useDnsV6// \\
+Decides whether to use server address or server URL. \\ \\
+. //staticIpAddressV6// \\
+Static IP V6 address of current device. \\ \\
+. //staticGatewayV6// \\
+Static IP V6 address of gateway. \\ \\
+. //dnsAddrV6// \\
+DNS address. \\ \\
+. //serverIpAddressV6// \\
+IP address of BioStar. Used only in the server mode. \\ \\
+. //serverPortV6// \\
+Port number of BioStar. Used only in the server mode. \\ \\
+. //sslServerPortV6// \\
+Used when the connectionMode is set as server SSL mode, which is the port of the SDK application. \\ \\
+. //portV6// \\
+Port number of the device. \\ \\
+. //numOfAllocatedAddressV6// \\
+The number of IP V6 address currently assigned to the device. \\ \\
+. //numOfAllocatedGatewayV6// \\
+The number of gateway address currently assigned to the device. \\ \\
+. //reserved// \\
+Reserved space. \\ \\
+. //allocatedIpAddressV6// \\
+The IP V6 address currently assigned to the device. \\ \\
+. //allocatedGatewayV6// \\
+The gateway address currently assigned to the device.\\ \\
+==== BS2DesFireCardConfigEx ====
+<code cpp>
+typedef struct {
+    uint8_t appMasterKey[16];
+    uint8_t fileReadKey[16];
+    uint8_t fileWriteKey[16];
+    uint8_t fileReadKeyNumber;
+    uint8_t fileWriteKeyNumber;
+    uint8_t reserved[2];
+} BS2DesFireAppLevelKey;                 ///< 52 bytes
+typedef struct {
+    BS2DesFireAppLevelKey desfireAppKey;    ///< 52 bytes
+    uint8_t reserved[16];
+} BS2DesFireCardConfigEx;                   ///< 68 bytes
+</code>
+. //appMasterKey// \\
+Application master key of DesFire. \\ \\
+. //fileReadKey// \\
+The key used to read the file. \\ \\
+. //fileWriteKey// \\
+The key used to write the file. \\ \\
+. //fileReadKeyNumber// \\
+The index of the key for reading the file. \\ \\
+. //fileWriteKeyNumber// \\
+The index of the key for writing the file. \\ \\
+. //reserved// \\
+Reserved space. \\ \\
+. //desfireAppKey// \\
+A structure containing DesFire key information. \\ \\
+. //reserved// \\
+Reserved space. \\