Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
|
en:device_api [2021/06/06 20:39] kateyu |
en:device_api [2023/08/16 15:51] mashin |
||
|---|---|---|---|
| Line 67: | Line 67: | ||
| <WRAP group 50%> | <WRAP group 50%> | ||
| ^Value ^Description ^ | ^Value ^Description ^ | ||
| + | |0x00 |Unknown Type | | ||
| |0x01 |BioEntry Plus | | |0x01 |BioEntry Plus | | ||
| |0x02 |BioEntry W | | |0x02 |BioEntry W | | ||
| Line 80: | Line 81: | ||
| |0x0C |BioStation L2 | | |0x0C |BioStation L2 | | ||
| |0x0D |BioEntry W2 | | |0x0D |BioEntry W2 | | ||
| - | |0x0E |CoreStation | | + | |0x0E |CoreStation 40 | |
| - | |0x0F |Output Module| | + | |0x0F |Output Module | |
| - | |0x10 |Input Module| | + | |0x10 |Input Module | |
| - | |0x11 |BioEntry P2| | + | |0x11 |BioEntry P2 | |
| - | |0x0F |OM-120 | | + | |0x12 |BioLite N2 | |
| + | |0x13 |XPass2 | | ||
| + | |0x14 |XPass S3 | | ||
| + | |0x15 |BioEntry R2 | | ||
| + | |0x16 |XPass D2 | | ||
| + | |0x17 |Door Module 21 | | ||
| + | |0x18 |XPass D2 Keypad | | ||
| + | |0x19 |FACELITE | | ||
| + | |0x1A |XPass2 Keypad | | ||
| + | |0x1B |XPass D2 Revision | | ||
| + | |0x1C |XPass D2 Keypad Revision | | ||
| + | |0x1D |FaceStation F2 Finger | | ||
| + | |0x1E |FaceStation F2 | | ||
| + | |0x1F |XStation 2 QR | | ||
| + | |0x20 |XStation 2 | | ||
| + | |0x21 |Input Module 120 | | ||
| + | |0x22 |XStation 2 Finger | | ||
| </WRAP> | </WRAP> | ||
| Line 183: | Line 200: | ||
| BS2_SUPPORT_DESFIREEX = 0x00000008, | BS2_SUPPORT_DESFIREEX = 0x00000008, | ||
| BS2_SUPPORT_FACE_EX = 0x00000010, | BS2_SUPPORT_FACE_EX = 0x00000010, | ||
| + | BS2_SUPPORT_QR = 0x00000020, | ||
| BS2_SUPPORT_FINGER_SCAN = 0x00010000, | BS2_SUPPORT_FINGER_SCAN = 0x00010000, | ||
| BS2_SUPPORT_FACE_SCAN = 0x00020000, | BS2_SUPPORT_FACE_SCAN = 0x00020000, | ||
| BS2_SUPPORT_FACE_EX_SCAN = 0x00040000, | BS2_SUPPORT_FACE_EX_SCAN = 0x00040000, | ||
| + | BS2_SUPPORT_QR_SCAN = 0x00080000, | ||
| - | BS2_SUPPORT_ALL = BS2_SUPPORT_RS485EX | BS2_SUPPORT_CARDEX | BS2_SUPPORT_DST | BS2_SUPPORT_DESFIREEX | BS2_SUPPORT_FACE_EX | BS2_SUPPORT_FINGER_SCAN | BS2_SUPPORT_FACE_SCAN | BS2_SUPPORT_FACE_EX_SCAN, | + | BS2_SUPPORT_ALL = BS2_SUPPORT_RS485EX | |
| + | BS2_SUPPORT_CARDEX | | ||
| + | BS2_SUPPORT_DST | | ||
| + | BS2_SUPPORT_DESFIREEX | | ||
| + | BS2_SUPPORT_FACE_EX | | ||
| + | BS2_SUPPORT_QR | | ||
| + | BS2_SUPPORT_FINGER_SCAN | | ||
| + | BS2_SUPPORT_FACE_SCAN | | ||
| + | BS2_SUPPORT_FACE_EX_SCAN | | ||
| + | BS2_SUPPORT_QR_SCAN, | ||
| }; | }; | ||
| uint32_t supported; | uint32_t supported; | ||
| Line 205: | Line 233: | ||
| |BS2_SUPPORT_DESFIREEX |0x00000008 |Whether DesFire advanced setting is supported [+2.6.4] | | |BS2_SUPPORT_DESFIREEX |0x00000008 |Whether DesFire advanced setting is supported [+2.6.4] | | ||
| |BS2_SUPPORT_FACE_EX |0x00000010 |Whether support face matching for FSF2 [+ V2.7.1] | | |BS2_SUPPORT_FACE_EX |0x00000010 |Whether support face matching for FSF2 [+ V2.7.1] | | ||
| + | |BS2_SUPPORT_QR |0x00000020 |Whether support QR matching ''XStation 2 QR'' [+ V2.8.0] | | ||
| |BS2_SUPPORT_FINGER_SCAN |0x00010000 |Whether support fingerprint scan [+ V2.7.1] | | |BS2_SUPPORT_FINGER_SCAN |0x00010000 |Whether support fingerprint scan [+ V2.7.1] | | ||
| |BS2_SUPPORT_FACE_SCAN |0x00020000 |Whether support face scan for FS2 and FL [+ V2.7.1] | | |BS2_SUPPORT_FACE_SCAN |0x00020000 |Whether support face scan for FS2 and FL [+ V2.7.1] | | ||
| |BS2_SUPPORT_FACE_EX_SCAN |0x00040000 |Whether support face scan for FSF2 [+ V2.7.1] | | |BS2_SUPPORT_FACE_EX_SCAN |0x00040000 |Whether support face scan for FSF2 [+ V2.7.1] | | ||
| - | |BS2_SUPPORT_ALL |0x0000000F |Whether to provide additional full information | | + | |BS2_SUPPORT_QR_SCAN |0x00080000 |Whether support QR scan ''XStation 2'' [+ V2.8.0] | |
| + | |BS2_SUPPORT_ALL |0x000FFFFF |Whether to provide additional full information | | ||
| </WRAP> | </WRAP> | ||
| Line 304: | Line 334: | ||
| </WRAP> | </WRAP> | ||
| 3. //reserved// \\ | 3. //reserved// \\ | ||
| - | Reserved space \\ | + | Reserved space \\ \\ |
| ==== BS2DeviceCapabilities ==== | ==== BS2DeviceCapabilities ==== | ||
| Line 477: | Line 508: | ||
| | | ||
| uint8_t reserved[431]; | uint8_t reserved[431]; | ||
| + | } BS2DeviceCapabilities; | ||
| + | </code> | ||
| + | 1. //maxUsers// \\ | ||
| + | Indicates the maximum number of information that can be stored on the device. (User) \\ \\ | ||
| + | 2. //maxEventLogs// \\ | ||
| + | Indicates the maximum number of information that can be stored on the device. (Event log) \\ \\ | ||
| + | 3. //maxImageLogs// \\ | ||
| + | Indicates the maximum number of information that can be stored on the device. (Image log) \\ \\ | ||
| + | 4. //maxBlacklists// \\ | ||
| + | Indicates the maximum number of information that can be stored on the device. (Blacklist) \\ \\ | ||
| + | 5. //maxOperators// \\ | ||
| + | Indicates the maximum number of information that can be stored on the device. (Operator) \\ \\ | ||
| + | 6. //maxCards// \\ | ||
| + | Indicates the maximum number of information that can be stored on the device. (Card) \\ \\ | ||
| + | 7. //maxFaces// \\ | ||
| + | Indicates the maximum number of information that can be stored on the device. (Face) \\ \\ | ||
| + | 8. //maxFingerprints// \\ | ||
| + | Indicates the maximum number of information that can be stored on the device. (Fingerprint) \\ \\ | ||
| + | 9. //maxUserNames// \\ | ||
| + | Indicates the maximum number of information that can be stored on the device. (Username) \\ \\ | ||
| + | 10. //maxUserImages// \\ | ||
| + | Indicates the maximum number of information that can be stored on the device. (user image) \\ \\ | ||
| + | 11. //maxUserJobs// \\ | ||
| + | Indicates the maximum number of information that can be stored on the device. (Job code) \\ \\ | ||
| + | 12. //maxUserPhrases// \\ | ||
| + | Indicates the maximum number of information that can be stored on the device. (User phrase) \\ \\ | ||
| + | 13. //maxCardsPerUser// \\ | ||
| + | Indicates the maximum number of information that can be stored on the device. (Card per user) \\ \\ | ||
| + | 14. //maxFacesPerUser// \\ | ||
| + | Indicates the maximum number of information that can be stored on the device. (Face per user) \\ \\ | ||
| + | 15. //maxFingerprintsPerUser// \\ | ||
| + | Indicates the maximum number of information that can be stored on the device. (Fingerprint per user) \\ \\ | ||
| + | 16. //maxInputPorts// \\ | ||
| + | Indicates the maximum number of information that can be stored on the device. (input port of device) \\ \\ | ||
| + | 17. //maxOutputPorts// \\ | ||
| + | Indicates the maximum number of information that can be stored on the device. (output port of device) \\ \\ | ||
| + | 18. //maxRelays// \\ | ||
| + | Indicates the maximum number of information that can be stored on the device. (relay on device) \\ \\ | ||
| + | 19. //maxRS485Channels// \\ | ||
| + | Indicates the maximum number of information that can be stored on the device. (RS485 channel) \\ \\ | ||
| + | 20. //System support information// \\ | ||
| + | It indicates the system information supported by the device in bit units as follows. \\ | ||
| + | ^Bit position ^Number of bit ^Member ^Description ^ | ||
| + | |0 |1 |cameraSupported |Camera Support or not | | ||
| + | |1 |1 |tamperSupported |Tamper Support or not | | ||
| + | |2 |1 |wlanSupported |WLAN Support or not | | ||
| + | |3 |1 |displaySupported |Available LCD or not | | ||
| + | |4 |1 |thermalSupported |TCM 10 (Thermal Detection) Support or not | | ||
| + | |5 |1 |maskSupported |Mask Detection Support or not | | ||
| + | |6 |1 |faceExSupported |Visual Face device such as FaceStation F2 or not | | ||
| + | |7 |1 |unused |Unassigned | | ||
| + | 21. //cardSupported// \\ | ||
| + | This indicates the card support relevant. \\ | ||
| + | Referring to mask value, you can access each item in its entirety or in bit units. \\ | ||
| + | ^Bit position ^Number of bit ^Member ^Description ^ | ||
| + | |- |Total |mask |total Information | | ||
| + | |0 |1 |EM |EM Card | | ||
| + | |1 |1 |HIDProx |HID Proximity Card | | ||
| + | |2 |1 |MifareFelica |MIFARE / FeliCa | | ||
| + | |3 |1 |iClass |iClass Card | | ||
| + | |4 |1 |ClassicPlus |Classic plus Card | | ||
| + | |5 |1 |DesFireEV1 |DESFire EV1 | | ||
| + | |6 |1 |SRSE |iClass SR, iClass SE | | ||
| + | |7 |1 |SEOS |iClass SEOS | | ||
| + | |8 |1 |NFC |NFC Card | | ||
| + | |9 |1 |BLE |BLE | | ||
| + | |10 |21 |reserved |Unassigned | | ||
| + | |31 |1 |useCardOperation |Card operation enabled or not | | ||
| + | 22. //authSupported// \\ | ||
| + | This indicates support information related to authentication. \\ \\ | ||
| + | 23. //extendedMode// \\ | ||
| + | If true, extended authentication mode is supported, refer to authSupported.extended. \\ | ||
| + | If false, non-extended authentication mode is supported, refer to authSupported.lagacy. \\ \\ | ||
| + | 24. //credentials// \\ | ||
| + | This indicates supported authentication methods. You can access each item in its entirety or in bit units as a mask value. \\ | ||
| + | ^Bit position ^Number of bit ^Member ^Description ^ | ||
| + | |- |Total |mask |Total Information | | ||
| + | |0 |1 |card |Card | | ||
| + | |1 |1 |fingerprint |Fingerprint | | ||
| + | |2 |1 |face |Face | | ||
| + | |3 |1 |id |ID | | ||
| + | |4 |1 |pin |PIN | | ||
| + | |5 |3 |reserved |Unassgined | | ||
| + | 25. //reserved// \\ | ||
| + | Reserved space.\\ \\ | ||
| + | 26. //legacy// \\ | ||
| + | Information referenced when non-extended authentication mode is supported. \\ \\ | ||
| + | 27. //biometricAuth// \\ | ||
| + | (Non-extended authentication mode) Indicates the biometric authentication combination. \\ | ||
| + | ^Bit position ^Number of bit ^Member ^Description ^ | ||
| + | |- |Total |mask |Total Information | | ||
| + | |0 |1 |biometricOnly |Biometric only | | ||
| + | |1 |1 |biometricPIN |Biometric + PIN | | ||
| + | |2 |6 |unused |Unassigned | | ||
| + | 28. //cardAuth// \\ | ||
| + | (Non-extended authentication mode) Indicates the card authentication combination. \\ | ||
| + | ^Bit position ^Number of bit ^Member ^Description ^ | ||
| + | |- |Total |mask |Total Information | | ||
| + | |0 |1 |cardOnly |Card only | | ||
| + | |1 |1 |cardBiometric |Card + Biometric | | ||
| + | |2 |1 |cardPIN |Card + PIN | | ||
| + | |3 |1 |cardBiometricOrPIN |Card + Biometric/PIN | | ||
| + | |4 |1 |cardBiometricPIN |Card + Biometric + PIN | | ||
| + | |5 |3 |unused |Unassigned | | ||
| + | 29. //idAuth// \\ | ||
| + | (Non-extended authentication mode) Indicates the ID authentication combination. \\ | ||
| + | ^Bit position ^Number of bit ^Member ^Description ^ | ||
| + | |- |Total |mask |Total Information | | ||
| + | |0 |1 |idBiometric |ID + Biometric | | ||
| + | |1 |1 |idPIN |ID + PIN | | ||
| + | |2 |1 |idBiometricOrPIN |ID + Biometric/PIN | | ||
| + | |3 |1 |idBiometricPIN |ID + Biometric + PIN | | ||
| + | |4 |4 |unused |미할당 필드. | | ||
| + | 30. //extended// \\ | ||
| + | This information is referenced when supporting extended authentication mode. \\ \\ | ||
| + | 31. //faceAuth// \\ | ||
| + | (Extended authentication mode) Indicates the face authentication combination. \\ | ||
| + | ^Bit position ^Number of bit ^Member ^Description ^ | ||
| + | |- |Total |mask |Total Information | | ||
| + | |0 |1 |faceOnly |Face only | | ||
| + | |1 |1 |faceFingerprint |Face + Fingerprint | | ||
| + | |2 |1 |facePIN |Face + PIN | | ||
| + | |3 |1 |faceFingerprintOrPIN |Face + Fingerprint/PIN | | ||
| + | |4 |1 |faceFingerprintPIN |Face + Fingerprint + PIN | | ||
| + | |5 |27 |unused |Unassigned | | ||
| + | 32. //fingerprintAuth// \\ | ||
| + | (Extended authentication mode) Indicates a combination of fingerprint authentication. \\ | ||
| + | ^Bit position ^Number of bit ^Member ^Description ^ | ||
| + | |- |Total |mask |Total Information | | ||
| + | |0 |1 |fingerprintOnly |Fingerprint only | | ||
| + | |1 |1 |fingerprintFace |Fingerprint + Face | | ||
| + | |2 |1 |fingerprintPIN |Fingerprint + PIN | | ||
| + | |3 |1 |fingerprintFaceOrPIN |Fingerprint + Face/PIN | | ||
| + | |4 |1 |fingerprintFacePIN |Fingerprint + Face + PIN | | ||
| + | |5 |27 |unused |Unassigned | | ||
| + | 33. //cardAuth// \\ | ||
| + | (Extended authentication mode) Indicates the card authentication combination. \\ | ||
| + | ^Bit position ^Number of bit ^Member ^Description ^ | ||
| + | |- |Total |mask |Total Information | | ||
| + | |0 |1 |cardOnly |Card only | | ||
| + | |1 |1 |cardFace |Card + Face | | ||
| + | |2 |1 |cardFingerprint |Card + Fingerprint | | ||
| + | |3 |1 |cardPIN |Card + PIN | | ||
| + | |4 |1 |cardFaceOrFingerprint |Card + Face/Fingerprint | | ||
| + | |5 |1 |cardFaceOrPIN |Card + Face/PIN | | ||
| + | |6 |1 |cardFingerprintOrPIN |Card + Fingerprint/PIN | | ||
| + | |7 |1 |cardFaceOrFingerprintOrPIN |Card + Face/Fingerprint/PIN | | ||
| + | |8 |1 |cardFaceFingerprint |Card + Face + Fingerprint | | ||
| + | |9 |1 |cardFacePIN |Card + Face + PIN | | ||
| + | |10 |1 |cardFingerprintFace |Card + Fingerprint + Face | | ||
| + | |11 |1 |cardFingerprintPIN |Card + Fingerprint + PIN | | ||
| + | |12 |1 |cardFaceOrFingerprintPIN |Card + Face/Fingerprint + PIN | | ||
| + | |13 |1 |cardFaceFingerprintOrPIN |Card + Face + Fingerprint/PIN | | ||
| + | |14 |1 |cardFingerprintFaceOrPIN |Card + Fingerprint + Face/PIN | | ||
| + | |15 |17 |unused |Unassigned | | ||
| + | 34. //idAuth// \\ | ||
| + | (Extended authentication mode) Indicates the ID authentication combination. \\ | ||
| + | ^Bit position ^Number of bit ^Member ^Description ^ | ||
| + | |- |Total |mask |Total Information | | ||
| + | |1 |1 |idFace |ID + Face | | ||
| + | |2 |1 |idFingerprint |ID + Fingerprint | | ||
| + | |3 |1 |idPIN |ID + PIN | | ||
| + | |4 |1 |idFaceOrFingerprint |ID + Face/Fingerprint | | ||
| + | |5 |1 |idFaceOrPIN |ID + Face/PIN | | ||
| + | |6 |1 |idFingerprintOrPIN |ID + Fingerprint/PIN | | ||
| + | |7 |1 |idFaceOrFingerprintOrPIN |ID + Face/Fingerprint/PIN | | ||
| + | |8 |1 |idFaceFingerprint |ID + Face + Fingerprint | | ||
| + | |9 |1 |idFacePIN |ID + Face + PIN | | ||
| + | |10 |1 |idFingerprintFace |ID + Fingerprint + Face | | ||
| + | |11 |1 |idFingerprintPIN |ID + Fingerprint + PIN | | ||
| + | |12 |1 |idFaceOrFingerprintPIN |ID + Face/Fingerprint + PIN | | ||
| + | |13 |1 |idFaceFingerprintOrPIN |ID + Face + Fingerprint/PIN | | ||
| + | |14 |1 |idFingerprintFaceOrPIN |ID + Fingerprint + Face/PIN | | ||
| + | |15 |18 |unused |Unassigned | | ||
| + | 35. //System support information// \\ | ||
| + | It indicates the system information supported by the device in bit units as follows. \\ | ||
| + | ^Bit position ^Number of bit ^Member ^Description ^ | ||
| + | |0 |1 |intelligentPDSupported |Whether Intelligent PD is supported.([[configuration api#BS2Rs485Config|BS2Rs485Config]]) | | ||
| + | |1 |1 |updateUserSupported |Whether User information update is supported. | | ||
| + | |2 |1 |simulatedUnlockSupported |Whether simulated button unlock is supported. | | ||
| + | |3 |1 |smartCardByteOrderSupported |Whether smartCardByteOrder is supported ([[configuration api#BS2CardConfig|BS2CardConfig]]) | | ||
| + | |4 |1 |treatAsCSNSupported |Whether treatAsCSN is supported. ([[configuration api#BS2BarcodeConfig|BS2BarcodeConfig]]) | | ||
| + | |5 |1 |rtspSupported |Whether RTSP is supported. ([[configuration api#BS2RtspConfig|BS2RtspConfig]]) | | ||
| + | |6 |1 |lfdSupported |Whether LFD is supported. | | ||
| + | |7 |1 |visualQRSupported |Whether Visual QR is supported. | | ||
| + | |||
| + | 36. //maxVoipExtensionNumbers// \\ | ||
| + | It is the number of registered internal numbers in the extension phone book at the extended VoIP setting information.\\ \\ | ||
| + | 37. //reserved// \\ | ||
| + | Reserved space.\\ \\ | ||
| + | |||
| + | |||
| + | ==== BS2DeviceCapabilities ==== | ||
| + | ''[+ 2.8]'' | ||
| + | <code cpp> | ||
| + | typedef struct { | ||
| + | uint32_t maxUsers; ///< 4 bytes | ||
| + | uint32_t maxEventLogs; ///< 4 bytes | ||
| + | uint32_t maxImageLogs; ///< 4 bytes | ||
| + | uint32_t maxBlacklists; ///< 4 bytes | ||
| + | uint32_t maxOperators; ///< 4 bytes | ||
| + | uint32_t maxCards; ///< 4 bytes | ||
| + | uint32_t maxFaces; ///< 4 bytes | ||
| + | uint32_t maxFingerprints; ///< 4 bytes | ||
| + | uint32_t maxUserNames; ///< 4 bytes | ||
| + | uint32_t maxUserImages; ///< 4 bytes | ||
| + | uint32_t maxUserJobs; ///< 4 bytes | ||
| + | uint32_t maxUserPhrases; ///< 4 bytes | ||
| + | uint8_t maxOutputPorts; ///< 1 byte | ||
| + | uint8_t maxRelays; ///< 1 byte | ||
| + | uint8_t maxRS485Channels; ///< 1 byte | ||
| + | |||
| + | uint8_t cameraSupported: 1; | ||
| + | uint8_t tamperSupported: 1; | ||
| + | uint8_t wlanSupported: 1; | ||
| + | uint8_t displaySupported: 1; | ||
| + | uint8_t thermalSupported: 1; | ||
| + | uint8_t maskSupported: 1; | ||
| + | uint8_t faceExSupported: 1; | ||
| + | uint8_t unused: 1; | ||
| + | |||
| + | union { | ||
| + | uint32_t mask; ///< 4 bytes | ||
| + | struct { | ||
| + | uint32_t EM: 1; | ||
| + | uint32_t HIDProx: 1; | ||
| + | uint32_t MifareFelica: 1; | ||
| + | uint32_t iClass: 1; | ||
| + | uint32_t ClassicPlus: 1; | ||
| + | uint32_t DesFireEV1: 1; | ||
| + | uint32_t SRSE: 1; | ||
| + | uint32_t SEOS: 1; | ||
| + | uint32_t NFC: 1; | ||
| + | uint32_t BLE: 1; | ||
| + | uint32_t reserved: 21; | ||
| + | uint32_t useCardOperation: 1; | ||
| + | }; | ||
| + | } cardSupported; | ||
| + | |||
| + | struct { | ||
| + | BS2_BOOL extendedMode; ///< 1 byte | ||
| + | union { | ||
| + | uint8_t mask; ///< 1 byte | ||
| + | struct { | ||
| + | uint8_t card: 1; | ||
| + | uint8_t fingerprint: 1; | ||
| + | uint8_t face: 1; | ||
| + | uint8_t id: 1; | ||
| + | uint8_t pin: 1; | ||
| + | uint8_t reserved: 3; | ||
| + | }; | ||
| + | } credentials; | ||
| + | uint8_t reserved[2]; ///< 2 bytes | ||
| + | union { | ||
| + | struct { | ||
| + | union { | ||
| + | uint8_t mask; ///< 1 byte | ||
| + | struct { | ||
| + | uint8_t biometricOnly: 1; | ||
| + | uint8_t biometricPIN: 1; | ||
| + | uint8_t unused: 6; | ||
| + | }; | ||
| + | } biometricAuth; | ||
| + | |||
| + | union { | ||
| + | uint8_t mask; ///< 1 byte | ||
| + | struct { | ||
| + | uint8_t cardOnly: 1; | ||
| + | uint8_t cardBiometric: 1; | ||
| + | uint8_t cardPIN: 1; | ||
| + | uint8_t cardBiometricOrPIN: 1; | ||
| + | uint8_t cardBiometricPIN: 1; | ||
| + | uint8_t unused: 3; | ||
| + | }; | ||
| + | } cardAuth; | ||
| + | |||
| + | union { | ||
| + | uint8_t mask; ///< 1 byte | ||
| + | struct { | ||
| + | uint8_t idBiometric: 1; | ||
| + | uint8_t idPIN: 1; | ||
| + | uint8_t idBiometricOrPIN: 1; | ||
| + | uint8_t idBiometricPIN: 1; | ||
| + | uint8_t unused: 4; | ||
| + | }; | ||
| + | } idAuth; | ||
| + | } legacy; | ||
| + | |||
| + | struct { | ||
| + | union { | ||
| + | uint32_t mask; ///< 4 bytes | ||
| + | struct { | ||
| + | uint32_t faceOnly: 1; | ||
| + | uint32_t faceFingerprint: 1; | ||
| + | uint32_t facePIN: 1; | ||
| + | uint32_t faceFingerprintOrPIN: 1; | ||
| + | uint32_t faceFingerprintPIN: 1; | ||
| + | uint32_t unused: 27; | ||
| + | }; | ||
| + | } faceAuth; | ||
| + | |||
| + | union { | ||
| + | uint32_t mask; ///< 4 bytes | ||
| + | struct { | ||
| + | uint32_t fingerprintOnly: 1; | ||
| + | uint32_t fingerprintFace: 1; | ||
| + | uint32_t fingerprintPIN: 1; | ||
| + | uint32_t fingerprintFaceOrPIN: 1; | ||
| + | uint32_t fingerprintFacePIN: 1; | ||
| + | uint32_t unused: 27; | ||
| + | }; | ||
| + | } fingerprintAuth; | ||
| + | |||
| + | union { | ||
| + | uint32_t mask; ///< 4 bytes | ||
| + | struct { | ||
| + | uint32_t cardOnly: 1; | ||
| + | uint32_t cardFace: 1; | ||
| + | uint32_t cardFingerprint: 1; | ||
| + | uint32_t cardPIN: 1; | ||
| + | uint32_t cardFaceOrFingerprint: 1; | ||
| + | uint32_t cardFaceOrPIN: 1; | ||
| + | uint32_t cardFingerprintOrPIN: 1; | ||
| + | uint32_t cardFaceOrFingerprintOrPIN: 1; | ||
| + | uint32_t cardFaceFingerprint: 1; | ||
| + | uint32_t cardFacePIN: 1; | ||
| + | uint32_t cardFingerprintFace: 1; | ||
| + | uint32_t cardFingerprintPIN: 1; | ||
| + | uint32_t cardFaceOrFingerprintPIN: 1; | ||
| + | uint32_t cardFaceFingerprintOrPIN: 1; | ||
| + | uint32_t cardFingerprintFaceOrPIN: 1; | ||
| + | uint32_t unused: 17; | ||
| + | }; | ||
| + | } cardAuth; | ||
| + | |||
| + | union { | ||
| + | uint32_t mask; ///< 4 bytes | ||
| + | struct { | ||
| + | uint32_t idFace: 1; | ||
| + | uint32_t idFingerprint: 1; | ||
| + | uint32_t idPIN: 1; | ||
| + | uint32_t idFaceOrFingerprint: 1; | ||
| + | uint32_t idFaceOrPIN: 1; | ||
| + | uint32_t idFingerprintOrPIN: 1; | ||
| + | uint32_t idFaceOrFingerprintOrPIN: 1; | ||
| + | uint32_t idFaceFingerprint: 1; | ||
| + | uint32_t idFacePIN: 1; | ||
| + | uint32_t idFingerprintFace: 1; | ||
| + | uint32_t idFingerprintPIN: 1; | ||
| + | uint32_t idFaceOrFingerprintPIN: 1; | ||
| + | uint32_t idFaceFingerprintOrPIN: 1; | ||
| + | uint32_t idFingerprintFaceOrPIN: 1; | ||
| + | uint32_t unused: 18; | ||
| + | }; | ||
| + | } idAuth; | ||
| + | } extended; | ||
| + | }; | ||
| + | } authSupported; | ||
| + | |||
| + | uint8_t intelligentPDSupported: 1; | ||
| + | uint8_t updateUserSupported: 1; | ||
| + | uint8_t simulatedUnlockSupported: 1; | ||
| + | uint8_t smartCardByteOrderSupported: 1; | ||
| + | uint8_t treatAsCSNSupported: 1; | ||
| + | uint8_t rtspSupported: 1; | ||
| + | uint8_t lfdSupported: 1; | ||
| + | uint8_t visualQRSupported: 1; | ||
| + | |||
| + | uint8_t maxVoipExtensionNumbers; ///< 1 byte | ||
| + | uint8_t osdpStandardCentralSupported : 1; ///< 1 byte | ||
| + | uint8_t enableLicenseFuncSupported : 1; ///< 1 byte | ||
| + | uint8_t keypadBacklightSupported: 1; | ||
| + | uint8_t uzWirelessLockDoorSupported: 1; | ||
| + | uint8_t customSmartCardSupported: 1; | ||
| + | uint8_t tomSupported: 1; | ||
| + | uint8_t unused2: 2; ///< 1 byte | ||
| + | |||
| + | uint8_t reserved[429]; | ||
| } BS2DeviceCapabilities; | } BS2DeviceCapabilities; | ||
| </code> | </code> | ||
| 1. //maxUsers// \\ | 1. //maxUsers// \\ | ||
| - | 장치에 저장 가능한 정보의 최대 갯수를 나타냅니다. (사용자) \\ \\ | + | Indicates the maximum number of information that can be stored on the device. (User) \\ \\ |
| 2. //maxEventLogs// \\ | 2. //maxEventLogs// \\ | ||
| - | 장치에 저장 가능한 정보의 최대 갯수를 나타냅니다. (이벤트로그) \\ \\ | + | Indicates the maximum number of information that can be stored on the device. (Event log) \\ \\ |
| 3. //maxImageLogs// \\ | 3. //maxImageLogs// \\ | ||
| - | 장치에 저장 가능한 정보의 최대 갯수를 나타냅니다. (이미지로그) \\ \\ | + | Indicates the maximum number of information that can be stored on the device. (Image log) \\ \\ |
| 4. //maxBlacklists// \\ | 4. //maxBlacklists// \\ | ||
| - | 장치에 저장 가능한 정보의 최대 갯수를 나타냅니다. (블랙리스트) \\ \\ | + | Indicates the maximum number of information that can be stored on the device. (Blacklist) \\ \\ |
| 5. //maxOperators// \\ | 5. //maxOperators// \\ | ||
| - | 장치에 저장 가능한 정보의 최대 갯수를 나타냅니다. (관리자) \\ \\ | + | Indicates the maximum number of information that can be stored on the device. (Operator) \\ \\ |
| 6. //maxCards// \\ | 6. //maxCards// \\ | ||
| - | 장치에 저장 가능한 정보의 최대 갯수를 나타냅니다. (카드) \\ \\ | + | Indicates the maximum number of information that can be stored on the device. (Card) \\ \\ |
| 7. //maxFaces// \\ | 7. //maxFaces// \\ | ||
| - | 장치에 저장 가능한 정보의 최대 갯수를 나타냅니다. (얼굴) \\ \\ | + | Indicates the maximum number of information that can be stored on the device. (Face) \\ \\ |
| 8. //maxFingerprints// \\ | 8. //maxFingerprints// \\ | ||
| - | 장치에 저장 가능한 정보의 최대 갯수를 나타냅니다. (지문) \\ \\ | + | Indicates the maximum number of information that can be stored on the device. (Fingerprint) \\ \\ |
| 9. //maxUserNames// \\ | 9. //maxUserNames// \\ | ||
| - | 장치에 저장 가능한 정보의 최대 갯수를 나타냅니다. (사용자 명) \\ \\ | + | Indicates the maximum number of information that can be stored on the device. (Username) \\ \\ |
| 10. //maxUserImages// \\ | 10. //maxUserImages// \\ | ||
| - | 장치에 저장 가능한 정보의 최대 갯수를 나타냅니다. (사용자 이미지) \\ \\ | + | Indicates the maximum number of information that can be stored on the device. (user image) \\ \\ |
| 11. //maxUserJobs// \\ | 11. //maxUserJobs// \\ | ||
| - | 장치에 저장 가능한 정보의 최대 갯수를 나타냅니다. (Job code) \\ \\ | + | Indicates the maximum number of information that can be stored on the device. (Job code) \\ \\ |
| 12. //maxUserPhrases// \\ | 12. //maxUserPhrases// \\ | ||
| - | 장치에 저장 가능한 정보의 최대 갯수를 나타냅니다. (사용자 구문) \\ \\ | + | Indicates the maximum number of information that can be stored on the device. (User phrase) \\ \\ |
| 13. //maxCardsPerUser// \\ | 13. //maxCardsPerUser// \\ | ||
| - | 장치에 저장 가능한 정보의 최대 갯수를 나타냅니다. (사용자별 카드) \\ \\ | + | Indicates the maximum number of information that can be stored on the device. (Card per user) \\ \\ |
| 14. //maxFacesPerUser// \\ | 14. //maxFacesPerUser// \\ | ||
| - | 장치에 저장 가능한 정보의 최대 갯수를 나타냅니다. (사용자별 얼굴) \\ \\ | + | Indicates the maximum number of information that can be stored on the device. (Face per user) \\ \\ |
| 15. //maxFingerprintsPerUser// \\ | 15. //maxFingerprintsPerUser// \\ | ||
| - | 장치에 저장 가능한 정보의 최대 갯수를 나타냅니다. (사용자별 지문) \\ \\ | + | Indicates the maximum number of information that can be stored on the device. (Fingerprint per user) \\ \\ |
| 16. //maxInputPorts// \\ | 16. //maxInputPorts// \\ | ||
| - | 장치에 저장 가능한 정보의 최대 갯수를 나타냅니다. (장치의 입력포트) \\ \\ | + | Indicates the maximum number of information that can be stored on the device. (input port of device) \\ \\ |
| 17. //maxOutputPorts// \\ | 17. //maxOutputPorts// \\ | ||
| - | 장치에 저장 가능한 정보의 최대 갯수를 나타냅니다. (장치의 출력포트) \\ \\ | + | Indicates the maximum number of information that can be stored on the device. (output port of device) \\ \\ |
| 18. //maxRelays// \\ | 18. //maxRelays// \\ | ||
| - | 장치에 저장 가능한 정보의 최대 갯수를 나타냅니다. (장치의 릴레이) \\ \\ | + | Indicates the maximum number of information that can be stored on the device. (relay on device) \\ \\ |
| 19. //maxRS485Channels// \\ | 19. //maxRS485Channels// \\ | ||
| - | 장치에 저장 가능한 정보의 최대 갯수를 나타냅니다. (RS485 채널) \\ \\ | + | Indicates the maximum number of information that can be stored on the device. (RS485 channel) \\ \\ |
| - | 20. //시스템 지원 정보// \\ | + | 20. //System support information// \\ |
| - | 장치가 지원 가능한 시스템 정보를 bit 단위로 아래와 같이 나타냅니다. \\ | + | It indicates the system information supported by the device in bit units as follows. \\ |
| - | ^비트위치 ^비트 수 ^멤버명 ^설명 ^ | + | ^Bit position ^Number of bit ^Member ^Description ^ |
| - | |0 |1 |cameraSupported |카메라 지원 여부. | | + | |0 |1 |cameraSupported |Camera Support or not | |
| - | |1 |1 |tamperSupported |탬퍼 지원 여부. | | + | |1 |1 |tamperSupported |Tamper Support or not | |
| - | |2 |1 |wlanSupported |무선랜 지원 여부. | | + | |2 |1 |wlanSupported |WLAN Support or not | |
| - | |3 |1 |displaySupported |화면의 지원 여부. | | + | |3 |1 |displaySupported |Available LCD or not | |
| - | |4 |1 |thermalSupported |열화상 카메라 지원 여부. | | + | |4 |1 |thermalSupported |TCM 10 (Thermal Detection) Support or not | |
| - | |5 |1 |maskSupported |마스크 검출 지원 여부. | | + | |5 |1 |maskSupported |Mask Detection Support or not | |
| - | |6 |1 |faceExSupported |Visual camera 인증 지원 여부. | | + | |6 |1 |faceExSupported |Visual Face device such as FaceStation F2 or not | |
| - | |7 |1 |unused |미할당 필드. | | + | |7 |1 |unused |Unassigned | |
| 21. //cardSupported// \\ | 21. //cardSupported// \\ | ||
| - | 카드관련 지원 정보를 나타냅니다. mask값으로 전체를 또는 bit 단위로 각각의 지원항목에 접근할 수 있습니다. \\ | + | This indicates the card support relevant. \\ |
| - | ^비트위치 ^비트 수 ^멤버명 ^설명 ^ | + | Referring to mask value, you can access each item in its entirety or in bit units. \\ |
| - | |- |전체 |mask |전체정보 | | + | ^Bit position ^Number of bit ^Member ^Description ^ |
| - | |0 |1 |EM |EM 카드 | | + | |- |Total |mask |total Information | |
| - | |1 |1 |HIDProx |HID Proximity 카드 | | + | |0 |1 |EM |EM Card | |
| + | |1 |1 |HIDProx |HID Proximity Card | | ||
| |2 |1 |MifareFelica |MIFARE / FeliCa | | |2 |1 |MifareFelica |MIFARE / FeliCa | | ||
| - | |3 |1 |iClass |iClass 카드 | | + | |3 |1 |iClass |iClass Card | |
| - | |4 |1 |ClassicPlus |Classic plus 카드 | | + | |4 |1 |ClassicPlus |Classic plus Card | |
| |5 |1 |DesFireEV1 |DESFire EV1 | | |5 |1 |DesFireEV1 |DESFire EV1 | | ||
| |6 |1 |SRSE |iClass SR, iClass SE | | |6 |1 |SRSE |iClass SR, iClass SE | | ||
| |7 |1 |SEOS |iClass SEOS | | |7 |1 |SEOS |iClass SEOS | | ||
| - | |8 |1 |NFC |NFC 카드 | | + | |8 |1 |NFC |NFC Card | |
| |9 |1 |BLE |BLE | | |9 |1 |BLE |BLE | | ||
| - | |10 |21 |reserved |미할당 필드. | | + | |10 |21 |reserved |Unassigned | |
| - | |31 |1 |useCardOperation |카드 사용 여부 | | + | |31 |1 |useCardOperation |Card operation enabled or not | |
| 22. //authSupported// \\ | 22. //authSupported// \\ | ||
| - | 인증관련 지원 정보를 나타냅니다. \\ \\ | + | This indicates support information related to authentication. \\ \\ |
| 23. //extendedMode// \\ | 23. //extendedMode// \\ | ||
| - | true인 경우, 확장인증모드를 지원하며, authSupported.extended를 참조합니다. \\ | + | If true, extended authentication mode is supported, refer to authSupported.extended. \\ |
| - | false인 경우 비확장인증 모드를 지원하며, authSupported.lagacy를 참조합니다. \\ \\ | + | If false, non-extended authentication mode is supported, refer to authSupported.lagacy. \\ \\ |
| 24. //credentials// \\ | 24. //credentials// \\ | ||
| - | 지원되는 인증 수단을 나타냅니다. mask값으로 전체를 또는 bit 단위로 각각의 지원항목에 접근할 수 있습니다. \\ | + | This indicates supported authentication methods. You can access each item in its entirety or in bit units as a mask value. \\ |
| - | ^비트위치 ^비트 수 ^멤버명 ^설명 ^ | + | ^Bit position ^Number of bit ^Member ^Description ^ |
| - | |- |전체 |mask |전체정보 | | + | |- |Total |mask |Total Information | |
| - | |0 |1 |card |카드 | | + | |0 |1 |card |Card | |
| - | |1 |1 |fingerprint |지문 | | + | |1 |1 |fingerprint |Fingerprint | |
| - | |2 |1 |face |얼굴 | | + | |2 |1 |face |Face | |
| |3 |1 |id |ID | | |3 |1 |id |ID | | ||
| |4 |1 |pin |PIN | | |4 |1 |pin |PIN | | ||
| - | |5 |3 |reserved |미할당 필드. | | + | |5 |3 |reserved |Unassgined | |
| 25. //reserved// \\ | 25. //reserved// \\ | ||
| - | 예약된 공간입니다.\\ \\ | + | Reserved space.\\ \\ |
| 26. //legacy// \\ | 26. //legacy// \\ | ||
| - | 비확장 인증모드 지원 시, 참조되는 정보입니다. \\ \\ | + | Information referenced when non-extended authentication mode is supported. \\ \\ |
| 27. //biometricAuth// \\ | 27. //biometricAuth// \\ | ||
| - | (비확장 인증모드)Biometric 인증 조합을 나타냅니다. \\ | + | (Non-extended authentication mode) Indicates the biometric authentication combination. \\ |
| - | ^비트위치 ^비트 수 ^멤버명 ^설명 ^ | + | ^Bit position ^Number of bit ^Member ^Description ^ |
| - | |- |전체 |mask |전체정보 | | + | |- |Total |mask |Total Information | |
| |0 |1 |biometricOnly |Biometric only | | |0 |1 |biometricOnly |Biometric only | | ||
| |1 |1 |biometricPIN |Biometric + PIN | | |1 |1 |biometricPIN |Biometric + PIN | | ||
| - | |2 |6 |unused |미할당 필드. | | + | |2 |6 |unused |Unassigned | |
| 28. //cardAuth// \\ | 28. //cardAuth// \\ | ||
| - | (비확장 인증모드)Card 인증 조합을 나타냅니다. \\ | + | (Non-extended authentication mode) Indicates the card authentication combination. \\ |
| - | ^비트위치 ^비트 수 ^멤버명 ^설명 ^ | + | ^Bit position ^Number of bit ^Member ^Description ^ |
| - | |- |전체 |mask |전체정보 | | + | |- |Total |mask |Total Information | |
| |0 |1 |cardOnly |Card only | | |0 |1 |cardOnly |Card only | | ||
| |1 |1 |cardBiometric |Card + Biometric | | |1 |1 |cardBiometric |Card + Biometric | | ||
| Line 579: | Line 989: | ||
| |3 |1 |cardBiometricOrPIN |Card + Biometric/PIN | | |3 |1 |cardBiometricOrPIN |Card + Biometric/PIN | | ||
| |4 |1 |cardBiometricPIN |Card + Biometric + PIN | | |4 |1 |cardBiometricPIN |Card + Biometric + PIN | | ||
| - | |5 |3 |unused |미할당 필드. | | + | |5 |3 |unused |Unassigned | |
| 29. //idAuth// \\ | 29. //idAuth// \\ | ||
| - | (비확장 인증모드)ID 인증 조합을 나타냅니다. \\ | + | (Non-extended authentication mode) Indicates the ID authentication combination. \\ |
| - | ^비트위치 ^비트 수 ^멤버명 ^설명 ^ | + | ^Bit position ^Number of bit ^Member ^Description ^ |
| - | |- |전체 |mask |전체정보 | | + | |- |Total |mask |Total Information | |
| |0 |1 |idBiometric |ID + Biometric | | |0 |1 |idBiometric |ID + Biometric | | ||
| |1 |1 |idPIN |ID + PIN | | |1 |1 |idPIN |ID + PIN | | ||
| |2 |1 |idBiometricOrPIN |ID + Biometric/PIN | | |2 |1 |idBiometricOrPIN |ID + Biometric/PIN | | ||
| |3 |1 |idBiometricPIN |ID + Biometric + PIN | | |3 |1 |idBiometricPIN |ID + Biometric + PIN | | ||
| - | |4 |4 |unused |미할당 필드. | | + | |4 |4 |unused |Unassigned | |
| 30. //extended// \\ | 30. //extended// \\ | ||
| - | 확장 인증모드 지원 시, 참조되는 정보입니다. \\ \\ | + | This information is referenced when supporting extended authentication mode. \\ \\ |
| 31. //faceAuth// \\ | 31. //faceAuth// \\ | ||
| - | (확장 인증모드)얼굴 인증 조합을 나타냅니다. \\ | + | (Extended authentication mode) Indicates the face authentication combination. \\ |
| - | ^비트위치 ^비트 수 ^멤버명 ^설명 ^ | + | ^Bit position ^Number of bit ^Member ^Description ^ |
| - | |- |전체 |mask |전체정보 | | + | |- |Total |mask |Total Information | |
| |0 |1 |faceOnly |Face only | | |0 |1 |faceOnly |Face only | | ||
| |1 |1 |faceFingerprint |Face + Fingerprint | | |1 |1 |faceFingerprint |Face + Fingerprint | | ||
| Line 600: | Line 1010: | ||
| |3 |1 |faceFingerprintOrPIN |Face + Fingerprint/PIN | | |3 |1 |faceFingerprintOrPIN |Face + Fingerprint/PIN | | ||
| |4 |1 |faceFingerprintPIN |Face + Fingerprint + PIN | | |4 |1 |faceFingerprintPIN |Face + Fingerprint + PIN | | ||
| - | |5 |27 |unused |미할당 필드. | | + | |5 |27 |unused |Unassigned | |
| 32. //fingerprintAuth// \\ | 32. //fingerprintAuth// \\ | ||
| - | (확장 인증모드)지문 인증 조합을 나타냅니다. \\ | + | (Extended authentication mode) Indicates a combination of fingerprint authentication. \\ |
| - | ^비트위치 ^비트 수 ^멤버명 ^설명 ^ | + | ^Bit position ^Number of bit ^Member ^Description ^ |
| - | |- |전체 |mask |전체정보 | | + | |- |Total |mask |Total Information | |
| |0 |1 |fingerprintOnly |Fingerprint only | | |0 |1 |fingerprintOnly |Fingerprint only | | ||
| |1 |1 |fingerprintFace |Fingerprint + Face | | |1 |1 |fingerprintFace |Fingerprint + Face | | ||
| Line 610: | Line 1020: | ||
| |3 |1 |fingerprintFaceOrPIN |Fingerprint + Face/PIN | | |3 |1 |fingerprintFaceOrPIN |Fingerprint + Face/PIN | | ||
| |4 |1 |fingerprintFacePIN |Fingerprint + Face + PIN | | |4 |1 |fingerprintFacePIN |Fingerprint + Face + PIN | | ||
| - | |5 |27 |unused |미할당 필드. | | + | |5 |27 |unused |Unassigned | |
| 33. //cardAuth// \\ | 33. //cardAuth// \\ | ||
| - | (확장 인증모드)카드 인증 조합을 나타냅니다. \\ | + | (Extended authentication mode) Indicates the card authentication combination. \\ |
| - | ^비트위치 ^비트 수 ^멤버명 ^설명 ^ | + | ^Bit position ^Number of bit ^Member ^Description ^ |
| - | |- |전체 |mask |전체정보 | | + | |- |Total |mask |Total Information | |
| |0 |1 |cardOnly |Card only | | |0 |1 |cardOnly |Card only | | ||
| |1 |1 |cardFace |Card + Face | | |1 |1 |cardFace |Card + Face | | ||
| Line 630: | Line 1040: | ||
| |13 |1 |cardFaceFingerprintOrPIN |Card + Face + Fingerprint/PIN | | |13 |1 |cardFaceFingerprintOrPIN |Card + Face + Fingerprint/PIN | | ||
| |14 |1 |cardFingerprintFaceOrPIN |Card + Fingerprint + Face/PIN | | |14 |1 |cardFingerprintFaceOrPIN |Card + Fingerprint + Face/PIN | | ||
| - | |15 |17 |unused |미할당 필드. | | + | |15 |17 |unused |Unassigned | |
| 34. //idAuth// \\ | 34. //idAuth// \\ | ||
| - | (확장 인증모드)ID 인증 조합을 나타냅니다. \\ | + | (Extended authentication mode) Indicates the ID authentication combination. \\ |
| - | ^비트위치 ^비트 수 ^멤버명 ^설명 ^ | + | ^Bit position ^Number of bit ^Member ^Description ^ |
| - | |- |전체 |mask |전체정보 | | + | |- |Total |mask |Total Information | |
| |1 |1 |idFace |ID + Face | | |1 |1 |idFace |ID + Face | | ||
| |2 |1 |idFingerprint |ID + Fingerprint | | |2 |1 |idFingerprint |ID + Fingerprint | | ||
| Line 649: | Line 1059: | ||
| |13 |1 |idFaceFingerprintOrPIN |ID + Face + Fingerprint/PIN | | |13 |1 |idFaceFingerprintOrPIN |ID + Face + Fingerprint/PIN | | ||
| |14 |1 |idFingerprintFaceOrPIN |ID + Fingerprint + Face/PIN | | |14 |1 |idFingerprintFaceOrPIN |ID + Fingerprint + Face/PIN | | ||
| - | |15 |18 |unused |미할당 필드. | | + | |15 |18 |unused |Unassigned | |
| - | 35. //시스템 지원 정보// \\ | + | 35. //System support information// \\ |
| - | 장치가 지원 가능한 시스템 정보를 bit 단위로 아래와 같이 나타냅니다. \\ | + | It indicates the system information supported by the device in bit units as follows. \\ |
| - | ^비트위치 ^비트 수 ^멤버명 ^설명 ^ | + | ^Bit position ^Number of bit ^Member ^Description ^ |
| - | |0 |1 |intelligentPDSupported |Intelligent PD 지원 여부. | | + | |0 |1 |intelligentPDSupported |Whether Intelligent PD is supported. ([[configuration api#BS2Rs485Config|BS2Rs485Config]]) | |
| - | |1 |7 |unused2 |미할당 필드. | | + | |1 |1 |updateUserSupported |Whether User information update is supported. | |
| - | 36. //reserved// \\ | + | |2 |1 |simulatedUnlockSupported |Whether simulated button unlock is supported. | |
| - | 예약된 공간입니다.\\ \\ | + | |3 |1 |smartCardByteOrderSupported |Whether smartCardByteOrder is supported. ([[configuration api#BS2CardConfig|BS2CardConfig]]) | |
| + | |4 |1 |treatAsCSNSupported |Whether treatAsCSN is supported. ([[configuration api#BS2BarcodeConfig|BS2BarcodeConfig]]) | | ||
| + | |5 |1 |rtspSupported |Whether RTSP is supported. ([[configuration api#BS2RtspConfig|BS2RtspConfig]]) | | ||
| + | |6 |1 |lfdSupported |Whether LFD is supported. | | ||
| + | |7 |1 |visualQRSupported |Whether Visual QR is supported. | | ||
| + | 36. //maxVoipExtensionNumbers// \\ | ||
| + | It is the number of registered internal numbers in the extension phone book at the extended VoIP setting information. \\ \\ | ||
| + | 37. //System support information 2// \\ | ||
| + | It indicates the system information supported by the device in bit units as follows. \\ | ||
| + | ^Bit position ^Number of bit ^Member ^Description ^ | ||
| + | |0 |1 |osdpStandardCentralSupported |Whether OSDP Standard is supported. ([[configuration_api#BS2OsdpStandardConfig|BS2OsdpStandardConfig]]) | | ||
| + | |1 |1 |enableLicenseFuncSupported |Whether Device license is supported. ([[configuration_api#BS2LicenseConfig|BS2LicenseConfig]]) | | ||
| + | |2 |1 |keypadBacklightSupported |Whether Keypad backlight is supported. | | ||
| + | |3 |1 |uzWirelessLockDoorSupported |Whether U&Z wireless lock is supported. | | ||
| + | |4 |1 |customSmartCardSupported |Whether Custom card is supported. ([[configuration_api#BS2CustomCardConfig|BS2CustomCardConfig]]) | | ||
| + | |5 |1 |tomSupported |Whether ToM is supported. | | ||
| + | |6 |2 |unused2 |Unassigned | | ||
| + | 38. //reserved// \\ | ||
| + | Reserved space.\\ \\ | ||