Differences
This shows you the differences between two versions of the page.
|
en:log_management_api [2018/03/14 14:32] yjjung [BS2Event] |
en:log_management_api [2024/02/27 13:53] |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | ====== Log Management API ====== | ||
| - | API that controls the device log. | ||
| - | \\ | ||
| - | |||
| - | * [[BS2_GetLog]]: Gets certain amount of logs. | ||
| - | * [[BS2_GetFilteredLog]]: Gets filtered logs. | ||
| - | * [[BS2_ClearLog]]: Deletes all logs. | ||
| - | * [[BS2_StartMonitoringLog]]: Starts Real-time log streaming. | ||
| - | * [[BS2_StopMonitoringLog]]: Stops Real-time log streaming. | ||
| - | * [[BS2_GetLogBlob]]: Gets certain amount of logs based on the event mask. | ||
| - | * [[BS2_GetFilteredLogSinceEventId]]: Gets filtered logs. | ||
| - | ===== Callback Function ===== | ||
| - | <code cpp> | ||
| - | typedef void (*OnLogReceived)(uint32_t deviceId, BS2Event* log); | ||
| - | </code> | ||
| - | \\ | ||
| - | |||
| - | **1. //OnLogReceived//** \\ | ||
| - | Callback function that is called when a new log is received. \\ \\ | ||
| - | |||
| - | |||
| - | ===== Structure ===== | ||
| - | ==== BS2Event ==== | ||
| - | |||
| - | <code cpp> | ||
| - | typedef struct { | ||
| - | uint32_t id; | ||
| - | uint32_t dateTime; | ||
| - | uint32_t deviceID; | ||
| - | union { | ||
| - | char userID[BS2_USER_ID_SIZE]; | ||
| - | uint32_t uid; | ||
| - | uint32_t doorID; | ||
| - | uint32_t liftID; | ||
| - | uint32_t zoneID; | ||
| - | struct { | ||
| - | uint32_t ioDeviceID; | ||
| - | uint16_t port; | ||
| - | int8_t value; | ||
| - | uint8_t reserved[25]; | ||
| - | }; | ||
| - | struct { | ||
| - | uint32_t zoneID; | ||
| - | uint32_t doorID; | ||
| - | uint32_t ioDeviceID; | ||
| - | uint16_t port; | ||
| - | uint8_t reserved[18]; | ||
| - | } alarm; | ||
| - | struct { | ||
| - | uint32_t zoneID; | ||
| - | uint32_t doorID[4]; | ||
| - | uint8_t reserved[12]; | ||
| - | } interlock; | ||
| - | }; | ||
| - | union { | ||
| - | uint16_t code; | ||
| - | struct { | ||
| - | uint8_t subCode; | ||
| - | uint8_t mainCode; | ||
| - | }; | ||
| - | }; | ||
| - | uint8_t param; | ||
| - | #ifdef LESS_THAN_SDK_2_6_0 | ||
| - | BS2_BOOL image; // Deprecated in V2.6.0 | ||
| - | #else | ||
| - | uint8_t image: 1; // Support image and DST by bit division | ||
| - | uint8_t isDST: 1; | ||
| - | uint8_t half: 1; | ||
| - | uint8_t hour: 4; | ||
| - | uint8_t negative: 1; | ||
| - | #endif | ||
| - | } BS2Event; | ||
| - | </code> | ||
| - | \\ | ||
| - | |||
| - | **1. //id//** \\ | ||
| - | Log record ID which automatically increases from 1 when the log is generated. \\ \\ | ||
| - | **2. //dateTime//** \\ | ||
| - | The time when the log has been generated. It means the seconds past from UTC until the current time. \\ \\ | ||
| - | **3. //deviceID//** \\ | ||
| - | ID of the device that generated the log. \\ \\ | ||
| - | **4. //userID//** \\ | ||
| - | User ID related to log. When the value is 0, the log is not relevant to user. \\ \\ | ||
| - | **5. //uid//** \\ | ||
| - | You can refer to doorID regarding door log, zoneID regarding zone log. | ||
| - | If you do not know exactly then you can refer to uid. \\ | ||
| - | Since uid, doorID, liftID, zoneID are declared as union, basically it means information such as unordered list. \\ \\ | ||
| - | **6. //doorID//** \\ | ||
| - | ID of the door that generated the log. \\ \\ | ||
| - | **7. //liftID//** \\ | ||
| - | ID of the lift that generated the log. \\ \\ | ||
| - | **8. //zoneID//** \\ | ||
| - | ID of the zone that generated the log. \\ \\ | ||
| - | **9. //ioDeviceID//** \\ | ||
| - | Door or Input device ID. When the value is 0, the log is not relevant to Door or Input device. \\ \\ | ||
| - | **10. //port//** \\ | ||
| - | Port for ioDeviceID. \\ \\ | ||
| - | **11. //value//** \\ | ||
| - | Port value for ioDeviceID and means below. \\ | ||
| - | BS2_PORT_VALUE_UNKNOWN : -1 \\ | ||
| - | BS2_PORT_VALUE_OPEN : 0 \\ | ||
| - | BS2_PORT_VALUE_CLOSED : 1 \\ | ||
| - | BS2_PORT_VALUE_SUPERVISED_SHORT : 2 \\ | ||
| - | BS2_PORT_VALUE_SUPERVISED_OPEN : 3 \\ \\ | ||
| - | **12. //alarm.zoneID//** \\ | ||
| - | Zone ID that makes intrusion alarm zone alarms. \\ \\ | ||
| - | **13. //alarm.doorID//** \\ | ||
| - | Door ID that makes intrusion alarm zone alarms. \\ \\ | ||
| - | **14. //interlock.zoneID//** \\ | ||
| - | Zone ID that makes interlock zone alarms. \\ \\ | ||
| - | **15. //interlock.doorID//** \\ | ||
| - | Door ID that makes interlock zone alarms. \\ \\ | ||
| - | **16. //subCode//** \\ | ||
| - | Sub code value of log types. Use if the additional information is necessary. \\ | ||
| - | ^Category ^Event code ^Value ^Description ^ | ||
| - | |Verify |BS2_SUB_EVENT_VERIFY_ID_PIN |0x01 |ID and PIN verification success | | ||
| - | |::: |BS2_SUB_EVENT_VERIFY_ID_FINGER |0x02 |ID and fingerprint verification success | | ||
| - | |::: |BS2_SUB_EVENT_VERIFY_ID_FINGER_PIN |0x03 |ID, fingerprint, and PIN verification success | | ||
| - | |::: |BS2_SUB_EVENT_VERIFY_ID_FACE |0x04 |ID and face verification success | | ||
| - | |::: |BS2_SUB_EVENT_VERIFY_ID_FACE_PIN |0x05 |ID, face, and PIN verification success | | ||
| - | |::: |BS2_SUB_EVENT_VERIFY_CARD |0x06 |Smart card verification success | | ||
| - | |::: |BS2_SUB_EVENT_VERIFY_CARD_PIN |0x07 |Smart card and PIN verification success | | ||
| - | |::: |BS2_SUB_EVENT_VERIFY_CARD_FINGER |0x08 |Smart card and fingerprint verification success | | ||
| - | |::: |BS2_SUB_EVENT_VERIFY_CARD_FINGER_PIN |0x09 |Smart card, fingerprint, and PIN verification success | | ||
| - | |::: |BS2_SUB_EVENT_VERIFY_CARD_FACE |0x0A |Smart card and face verification success | | ||
| - | |::: |BS2_SUB_EVENT_VERIFY_CARD_FACE_PIN |0x0B |Smart card, PIN, and face verification success | | ||
| - | |::: |BS2_SUB_EVENT_VERIFY_AOC |0x0C |AOC card verification success | | ||
| - | |::: |BS2_SUB_EVENT_VERIFY_AOC_PIN |0x0D |AOC card and PIN verification success | | ||
| - | |::: |BS2_SUB_EVENT_VERIFY_AOC_FINGER |0x0E |AOC card and fingerprint verification success | | ||
| - | |::: |BS2_SUB_EVENT_VERIFY_AOC_FINGER_PIN |0x0F |AOC card, fingerprint, PIN verification success | | ||
| - | |Identify |BS2_SUB_EVENT_IDENTIFY_FINGER |0x01 |Fingerprint identification success | | ||
| - | |::: |BS2_SUB_EVENT_IDENTIFY_FINGER_PIN |0x02 |Fingerprint and PIN identification success | | ||
| - | |::: |BS2_SUB_EVENT_IDENTIFY_FACE |0x03 |Face identification success | | ||
| - | |::: |BS2_SUB_EVENT_IDENTIFY_FACE_PIN |0x04 |Face and PIN identification success | | ||
| - | |Auth |BS2_SUB_EVENT_DUAL_AUTH_FAIL_TIMEOUT |0x01 |Dual authentication timeout | | ||
| - | |::: |BS2_SUB_EVENT_DUAL_AUTH_FAIL_ACCESS_GROUP |0x02 |Attempted the dual authentication with invalid user| | ||
| - | |Credential |BS2_SUB_EVENT_CREDENTIAL_ID |0x01 |Invalid user ID| | ||
| - | |::: |BS2_SUB_EVENT_CREDENTIAL_CARD |0x02 |Invalid Smart card | | ||
| - | |::: |BS2_SUB_EVENT_CREDENTIAL_PIN |0x03 |Invalid PIN | | ||
| - | |::: |BS2_SUB_EVENT_CREDENTIAL_FINGER |0x04 |Invalid fingerprint | | ||
| - | |::: |BS2_SUB_EVENT_CREDENTIAL_FACE |0x05 |Invalid face | | ||
| - | |::: |BS2_SUB_EVENT_CREDENTIAL_AOC_PIN |0x06 |Invalid AOC PIN | | ||
| - | |::: |BS2_SUB_EVENT_CREDENTIAL_AOC_FINGER |0x07 |Invalid AOC fingerprint | | ||
| - | |Auth |BS2_SUB_EVENT_AUTH_FAIL_INVALID_AUTH_MODE |0x01 |Invalid authentication mode | | ||
| - | |::: |BS2_SUB_EVENT_AUTH_FAIL_INVALID_CREDENTIAL |0x02 |Non-registered authentication method| | ||
| - | |::: |BS2_SUB_EVENT_AUTH_FAIL_TIMEOUT |0x03 |Authentication timeout | | ||
| - | |Access |BS2_SUB_EVENT_ACCESS_DENIED_ACCESS_GROUP |0x01 |Access was denied because the user has not been registered for the access group| | ||
| - | |::: |BS2_SUB_EVENT_ACCESS_DENIED_DISABLED |0x02 |Access was denied because the user is inactive| | ||
| - | |::: |BS2_SUB_EVENT_ACCESS_DENIED_EXPIRED |0x03 |Access was denied because the user entry period was expired| | ||
| - | |::: |BS2_SUB_EVENT_ACCESS_DENIED_ON_BLACKLIST |0x04 |Access was denied because the card is on the blacklist| | ||
| - | |::: |BS2_SUB_EVENT_ACCESS_DENIED_APB |0x05 |Access was denied because the user has violated the anti-passback rule| | ||
| - | |::: |BS2_SUB_EVENT_ACCESS_DENIED_TIMED_APB |0x06 |Access was denied because the user tried to enter the timed anti-passback zone within the limited time frame| | ||
| - | |::: |BS2_SUB_EVENT_ACCESS_DENIED_FORCED_LOCK |0x07 |Access was denied because the zone was forced to be locked| | ||
| - | |APB |BS2_SUB_EVENT_ZONE_HARD_APB |0x01 |Hard APB zone | | ||
| - | |::: |BS2_SUB_EVENT_ZONE_SOFT_APB |0x02 |Soft APB zone | | ||
| - | |||
| - | **17. //mainCode//** \\ | ||
| - | Main code value of log types. \\ | ||
| - | ^Category ^Event code ^Value ^Description ^ | ||
| - | |Auth |BS2_EVENT_VERIFY_SUCCESS |0x1000 |1:1 authentication success | | ||
| - | |::: |BS2_EVENT_VERIFY_FAIL |0x1100 |1:1 authentication fail | | ||
| - | |::: |BS2_EVENT_VERIFY_DURESS |0x1200 |1:1 duress authentication success | | ||
| - | |::: |BS2_EVENT_IDENTIFY_SUCCESS |0x1300 |1:N authentication success | | ||
| - | |::: |BS2_EVENT_IDENTIFY_FAIL |0x1400 |1:N authentication fail | | ||
| - | |::: |BS2_EVENT_IDENTIFY_DURESS |0x1500 |1:N duress authentication success | | ||
| - | |::: |BS2_EVENT_DUAL_AUTH_SUCCESS |0x1600 |Dual authentication success | | ||
| - | |::: |BS2_EVENT_DUAL_AUTH_FAIL |0x1700 |Dual authentication fail | | ||
| - | |::: |BS2_EVENT_AUTH_FAILED |0x1800 |Attempted to authenticate with the non-registered credential| | ||
| - | |::: |BS2_EVENT_ACCESS_DENIED |0x1900 |Invalid user attempted to authenticate or user violated the APB rule| | ||
| - | |::: |BS2_EVENT_FAKE_FINGER_DETECTED |0x1A00 |Fake fingerprint detection | | ||
| - | |User |BS2_EVENT_USER_ENROLL_SUCCESS |0x2000 |User enroll success | | ||
| - | |::: |BS2_EVENT_USER_ENROLL_FAIL |0x2100 |User enroll fail | | ||
| - | |::: |BS2_EVENT_USER_UPDATE_SUCCESS |0x2200 |User update success | | ||
| - | |::: |BS2_EVENT_USER_UPDATE_FAIL |0x2300 |User update fail | | ||
| - | |::: |BS2_EVENT_USER_DELETE_SUCCESS |0x2400 |User delete success | | ||
| - | |::: |BS2_EVENT_USER_DELETE_FAIL |0x2500 |User delete fail | | ||
| - | |::: |BS2_EVENT_USER_DELETE_ALL_SUCCESS |0x2600 |Delete all user success | | ||
| - | |::: |BS2_EVENT_USER_ISSUE_AOC_SUCCESS |0x2700 |Authentication success with access card | | ||
| - | |Device |BS2_EVENT_DEVICE_SYSTEM_RESET |0x3000 |System reset | | ||
| - | |::: |BS2_EVENT_DEVICE_SYSTEM_STARTED |0x3100 |System started | | ||
| - | |::: |BS2_EVENT_DEVICE_TIME_SET |0x3200 |System time set | | ||
| - | |::: |BS2_EVENT_DEVICE_TIMEZONE_SET |0x3201 |Time zone chagned | | ||
| - | |::: |BS2_EVENT_DEVICE_DST_SET |0x3202 |DST setting changed | | ||
| - | |::: |BS2_EVENT_DEVICE_LINK_CONNECTED |0x3300 |LAN cable connected | | ||
| - | |::: |BS2_EVENT_DEVICE_LINK_DISCONNETED |0x3400 |LAN cable disconnected | | ||
| - | |::: |BS2_EVENT_DEVICE_DHCP_SUCCESS |0x3500 |IP address allocated by DHCP | | ||
| - | |::: |BS2_EVENT_DEVICE_ADMIN_MENU |0x3600 |Open administrator menu | | ||
| - | |::: |BS2_EVENT_DEVICE_UI_LOCKED |0x3700 |Screen locked | | ||
| - | |::: |BS2_EVENT_DEVICE_UI_UNLOCKED |0x3800 |Screen unlocked | | ||
| - | |::: |BS2_EVENT_DEVICE_COMM_LOCKED |0x3900 |RS485 communication locked | | ||
| - | |::: |BS2_EVENT_DEVICE_COMM_UNLOCKED |0x3A00 |RS485 communication unlocked | | ||
| - | |::: |BS2_EVENT_DEVICE_TCP_CONNECTED |0x3B00 |TCP connected | | ||
| - | |::: |BS2_EVENT_DEVICE_TCP_DISCONNECTED |0x3C00 |TCP disconnected | | ||
| - | |::: |BS2_EVENT_DEVICE_RS485_CONNECTED |0x3D00 |RS485 connected | | ||
| - | |::: |BS2_EVENT_DEVICE_RS485_DISCONNCTED |0x3E00 |RS485 disconnected | | ||
| - | |::: |BS2_EVENT_DEVICE_INPUT_DETECTED |0x3F00 |Input device detected | | ||
| - | |::: |BS2_EVENT_DEVICE_TAMPER_ON |0x4000 |Device or peripheral was removed| | ||
| - | |::: |BS2_EVENT_DEVICE_TAMPER_OFF |0x4100 |Device or peripheral was reconnected| | ||
| - | |::: |BS2_EVENT_DEVICE_EVENT_LOG_CLEARED |0x4200 |Log was deleted| | ||
| - | |::: |BS2_EVENT_DEVICE_FIRMWARE_UPGRADED |0x4300 |Firmware was updated| | ||
| - | |::: |BS2_EVENT_DEVICE_RESOURCE_UPGRADED |0x4400 |Resource was updated| | ||
| - | |::: |BS2_EVENT_DEVICE_CONFIG_RESET |0x4500 |System information was initialized(including network)| | ||
| - | |::: |BS2_EVENT_DEVICE_DATABASE_RESET |0x4501 |Database was initialized | | ||
| - | |::: |BS2_EVENT_DEVICE_FACTORY_RESET |0x4502 |Factory default | | ||
| - | |::: |BS2_EVENT_DEVICE_CONFIG_RESET_EX |0x4503 |System information was initialized(without network) | | ||
| - | |Supervised Input |BS2_EVENT_SUPERVISED_INPUT_SHORT |0x4600 |Supervised Input (Short circuit detection) | | ||
| - | |::: |BS2_EVENT_SUPERVISED_INPUT_OPEN |0x4700 |Supervised Input (Disconnection detection) | | ||
| - | |Device-Ex |BS2_EVENT_DEVICE_AC_FAIL |0x4800 |AC Power failed | | ||
| - | |::: |BS2_EVENT_DEVICE_AC_SUCCESS |0x4900 |AC Power succeeded | | ||
| - | |Door |BS2_EVENT_DOOR_UNLOCKED |0x5000 |Door unlocked | | ||
| - | |::: |BS2_EVENT_DOOR_LOCKED |0x5100 |Door locked | | ||
| - | |::: |BS2_EVENT_DOOR_OPENED |0x5200 |Door opened | | ||
| - | |::: |BS2_EVENT_DOOR_CLOSED |0x5300 |Door closed | | ||
| - | |::: |BS2_EVENT_DOOR_FORCED_OPEN |0x5400 |Door forced open | | ||
| - | |::: |BS2_EVENT_DOOR_HELD_OPEN |0x5500 |Door held open | | ||
| - | |::: |BS2_EVENT_DOOR_FORCED_OPEN_ALARM |0x5600 |Door-forced-to-open alarm has started| | ||
| - | |::: |BS2_EVENT_DOOR_FORCED_OPEN_ALARM_CLEAR |0x5700 |Door-forced-to-open alarm was released| | ||
| - | |::: |BS2_EVENT_DOOR_HELD_OPEN_ALARM |0x5800 |Door-held-open alarm has started| | ||
| - | |::: |BS2_EVENT_DOOR_HELD_OPEN_ALARM_CLEAR |0x5900 |Door-held-open alarm was released| | ||
| - | |::: |BS2_EVENT_DOOR_APB_ALARM |0x5A00 |Door-level anti-passback alarm has started| | ||
| - | |::: |BS2_EVENT_DOOR_APB_ALARM_CLEAR |0x5B00 |Door-level anti-passback alarm was released| | ||
| - | |Zone |BS2_EVENT_ZONE_APB_VIOLATION |0x6000 |Zone-level anti-passback rule has been violated| | ||
| - | |::: |BS2_EVENT_ZONE_APB_ALARM |0x6100 |Zone-level anti-passback alarm has started| | ||
| - | |::: |BS2_EVENT_ZONE_APB_ALARM_CLEAR |0x6200 |Zone-level anti-passback alarm was released| | ||
| - | |::: |BS2_EVENT_ZONE_TIMED_APB_VIOLATION |0x6300 |Timed anti-passback rule has been violated| | ||
| - | |::: |BS2_EVENT_ZONE_TIMED_APB_ALARM |0x6400 |Timed anti-passback alarm has started| | ||
| - | |::: |BS2_EVENT_ZONE_TIMED_APB_ALARM_CLEAR |0x6500 |Timed anti-passback alarm was released| | ||
| - | |::: |BS2_EVENT_ZONE_FIRE_ALARM_INPUT |0x6600 |Fire alarm input was detected| | ||
| - | |::: |BS2_EVENT_ZONE_FIRE_ALARM |0x6700 |Fire alarm has started| | ||
| - | |::: |BS2_EVENT_ZONE_FIRE_ALARM_CLEAR |0x6800 |Fire alarm was released| | ||
| - | |::: |BS2_EVENT_ZONE_FORCED_LOCK_START |0x6900 |Door-forced-locked schedule has started| | ||
| - | |::: |BS2_EVENT_ZONE_FORCED_LOCK_END |0x6A00 |Door-forced-locked schedule has ended| | ||
| - | |::: |BS2_EVENT_ZONE_FORCED_UNLOCK_START |0x6B00 |Door-forced-unlocked schedule has started| | ||
| - | |::: |BS2_EVENT_ZONE_FORCED_UNLOCK_END |0x6C00 |Door-forced-unlocked schedule has ended| | ||
| - | |::: |BS2_EVENT_ZONE_SCHEDULED_UNLOCK_END |0x6D00 |Scheduled unlock ended | | ||
| - | |::: |BS2_EVENT_ZONE_SCHEDULED_LOCK_ALARM |0x6E00 |Scheduled lock alarm zone start | | ||
| - | |::: |BS2_EVENT_ZONE_SCHEDULED_LOCK_ALARM_CLEAR |0x6F00 |Scheduled lock alarm zone clear | | ||
| - | |||
| - | **18. //param//** \\ | ||
| - | It is used only when extra information on the device is needed. Usually, a time and attendance code, a port number of the door or input device is stored in the //param// argument. | ||
| - | When a time and attendance code is stored, refer to the following values: | ||
| - | <WRAP group 60%> | ||
| - | ^Device Type ^T&A Code ^Mapped Key ^Value^ | ||
| - | |BioStation 2|BS2_TNA_UNSPECIFIED|(N/A)|0| | ||
| - | |:::|BS2_TNA_KEY_1|F1|1| | ||
| - | |:::|BS2_TNA_KEY_2|F2|2| | ||
| - | |:::|BS2_TNA_KEY_3|F3|3| | ||
| - | |:::|BS2_TNA_KEY_4|F4|4| | ||
| - | |:::|BS2_TNA_KEY_5|1|5| | ||
| - | |:::|BS2_TNA_KEY_6|2|6| | ||
| - | |:::|BS2_TNA_KEY_7|3|7| | ||
| - | |:::|BS2_TNA_KEY_8|4|8| | ||
| - | |:::|BS2_TNA_KEY_9|5|9| | ||
| - | |:::|BS2_TNA_KEY_10|6|10| | ||
| - | |:::|BS2_TNA_KEY_11|7|11| | ||
| - | |:::|BS2_TNA_KEY_12|8|12| | ||
| - | |:::|BS2_TNA_KEY_13|9|13| | ||
| - | |:::|BS2_TNA_KEY_14|Call|14| | ||
| - | |:::|BS2_TNA_KEY_15|0|15| | ||
| - | |:::|BS2_TNA_KEY_16|Esc|16| | ||
| - | </WRAP> | ||
| - | |||
| - | |||
| - | **19. //image//** \\ | ||
| - | Prior to SDK V2.6.0, it used the whole 1 byte and means below: \\ | ||
| - | - Whether the image was included when the event occurred (true / false). \\ \\ | ||
| - | Since SDK V2.6.0, 1 byte has been changed to provide the following information by bit unit. \\ | ||
| - | - Whether or not image is included. | ||
| - | - Whether DST is applied | ||
| - | |||
| - | ^Category ^Bit ^Parameter ^Description ^ | ||
| - | |Prior to SDK 2.6.0 |8 |image | Used in case image is included when an event occurs. | | ||
| - | |Since SDK 2.6.0 |1 |image |Used in case image is included when an event occurs. | | ||
| - | |::: |1 |isDST |Whether the current log has been applied to DST | | ||
| - | |::: |1 |half |Whether DST is covered in 30-minute increments. 0 is 0 minutes, 1 is 30 minutes. | | ||
| - | |::: |4 |hour |Time. 1 to 12 o'clock | | ||
| - | |::: |1 |negative |0 is +, 1 is - | | ||
| - | |||
| - | ==== BS2EventBlob==== | ||
| - | |||
| - | <code cpp> | ||
| - | typedef struct { | ||
| - | uint16_t eventMask; | ||
| - | uint32_t id; | ||
| - | BS2EventExtInfo info; | ||
| - | union | ||
| - | { | ||
| - | BS2_USER_ID userID; // valid if eventMask has BS2_EVENT_MASK_USER_ID | ||
| - | uint8_t cardID[BS2_CARD_DATA_SIZE]; // valid if eventMask has BS2_EVENT_MASK_CARD_ID | ||
| - | BS2_DOOR_ID doorID; // valid if eventMask has BS2_EVENT_MASK_DOOR_ID | ||
| - | BS2_ZONE_ID zoneID; // valid if eventMask has BS2_EVENT_MASK_ZONE_ID | ||
| - | BS2EventExtIoDevice ioDevice; // valid if eventMask has BS2_EVENT_MASK_IODEVICE | ||
| - | }; | ||
| - | uint8_t tnaKey; | ||
| - | uint32_t jobCode; | ||
| - | uint16_t imageSize; | ||
| - | uint8_t image[BS2_EVENT_MAX_IMAGE_SIZE]; | ||
| - | uint8_t reserved; | ||
| - | } BS2EventBlob; | ||
| - | </code> | ||
| - | \\ | ||
| - | |||
| - | 1. //eventMask// \\ | ||
| - | Event mask value. Logs will be retrieved based on the mask value such as user, card, door, or zone.\\ \\ | ||
| - | <WRAP group 50%> | ||
| - | ^Value ^Description ^ | ||
| - | |0 |None | | ||
| - | |1 |BS2EventExtInfo structure | | ||
| - | |2 |User ID | | ||
| - | |4 |Card ID | | ||
| - | |8 |Door ID | | ||
| - | |16 |Zone ID | | ||
| - | |32 |BS2EventExtIoDevice structure | | ||
| - | |64 |Door ID | | ||
| - | |128 |Zone ID | | ||
| - | |256 |TNA Key | | ||
| - | |512 |Job Code | | ||
| - | |1024 |Image | | ||
| - | |65535 |ALL | | ||
| - | </WRAP> | ||
| - | 2. //id// \\ | ||
| - | Log record ID which automatically increases from 1 when the log is generated. \\ \\ | ||
| - | 3. //info// \\ | ||
| - | BS2EventExtInfo structure information. \\ \\ | ||
| - | 4. //userID// \\ | ||
| - | User ID related to log. When the value is 0, the log is not relevant to user. \\ \\ | ||
| - | 5. //cardID// \\ | ||
| - | Card ID related to log. When the value is 0, the log is not relevant to card. \\ \\ | ||
| - | 6. //doorID// \\ | ||
| - | Door ID related to log. When the value is 0, the log is not relevant to door. \\ \\ | ||
| - | 7. //zoneID// \\ | ||
| - | Zone ID related to log. When the value is 0, the log is not relevant to zone. \\ \\ | ||
| - | 8. //ioDevice// \\ | ||
| - | Door or input device ID related to log. When the value is 0, the log is not relevant to door or input. Refer to BS2EventExtIoDevice structure.\\ \\ | ||
| - | 9. //tnaKey// \\ | ||
| - | The T&A key that has been used for the authentication. When the value is 0, the log is not relevant to T&A key. \\ \\ | ||
| - | 10. //jobCode// \\ | ||
| - | The job code that has been used for the authentication. When the value is 0, the log is not relevant to job code. \\ \\ | ||
| - | 11. //imageSize// \\ | ||
| - | Size of the image when there is an image log. \\ \\ | ||
| - | 12. //image// \\ | ||
| - | Data of the image. \\ \\ | ||
| - | 13. //reserved// \\ | ||
| - | Reserved space.\\ \\ | ||
| - | |||
| - | ==== BS2EventExtInfo==== | ||
| - | |||
| - | <code cpp> | ||
| - | typedef struct { | ||
| - | uint32_t dateTime; | ||
| - | uint32_t deviceID; | ||
| - | union { ///< 2 bytes | ||
| - | BS2_EVENT_CODE code; | ||
| - | struct { | ||
| - | uint8_t subCode; | ||
| - | uint8_t mainCode; | ||
| - | }; | ||
| - | }; | ||
| - | uint8_t reserved[2]; | ||
| - | } BS2EventExtInfo; | ||
| - | </code> | ||
| - | \\ | ||
| - | |||
| - | 1. //dateTime// \\ | ||
| - | The time when the log has been generated. It means the seconds past from UTC until the current time. \\ \\ | ||
| - | 2. //deviceID// \\ | ||
| - | ID of the device that generated the log. \\ \\ | ||
| - | 3. //subCode// \\ | ||
| - | Sub code value of log types. Use if the additional information is necessary. \\ \\ | ||
| - | 4. //mainCode// \\ | ||
| - | Main code value of log types. \\ \\ | ||
| - | 5. //reserved// \\ | ||
| - | Reserved space.\\ \\ | ||
| - | ==== BS2EventExtIoDevice==== | ||
| - | |||
| - | <code cpp> | ||
| - | typedef struct { | ||
| - | uint32_t ioDeviceID; | ||
| - | uint16_t port; | ||
| - | uint8_t value; | ||
| - | uint8_t reserved[1]; | ||
| - | } BS2EventExtInfo; | ||
| - | </code> | ||
| - | \\ | ||
| - | |||
| - | 1. //ioDeviceID// \\ | ||
| - | Door or input device ID related to log. When the value is 0, the log is not relevant to door or input. \\ \\ | ||
| - | 2. //port// \\ | ||
| - | Input port number.\\ \\ | ||
| - | 3. //value// \\ | ||
| - | Status of the input port. \\ \\ | ||
| - | <WRAP group 50%> | ||
| - | ^Value ^Description ^ | ||
| - | |-1 |Unknown | | ||
| - | |0 |Open | | ||
| - | |1 |Closed | | ||
| - | |2 |Supervised Short | | ||
| - | |3 |Supervised Open | | ||
| - | </WRAP> | ||
| - | 4. //reserved// \\ | ||
| - | Reserved space.\\ \\ | ||