Differences

This shows you the differences between two versions of the page.

--- en:tc_appnote_om120_elevator_configuration [2017/09/22 13:00]
127.0.0.1 external edit
+++ en:tc_appnote_om120_elevator_configuration [2021/03/11 15:02] (current)
nykwon [Physical Configuration and Settings] - Changed order in note
@@ Line 12: / Line 12: @@
 The OM-120 is a 12-relay output control module. When used together with BioStar 2, it is able to control the access to select floors from the elevator. \\
-From one Master device, 31 more devices can be connected using a RS-485 daisy chain model, and it also supports AUX input. Furthermore, it can be used together with other features such as Anti-Passback zones, and Fire Zones.
+For one controller maximum of 16 OM-120 devices can be connected using a RS-485 daisy chain model, and it also supports AUX input. Furthermore, it can be used together with other features such as Anti-Passback zones, and Fire Zones.
 <WRAP round box>
 ==== Features ====
   * Each module supports 12 relays.
-  * Each elevator can control up to 192 floors.
+  * Each elevator configuration in BioStar 2 can control up to 192 floors (12 relay x 16 OM-120)
   * When an anti-passback alarm is triggered, it can be configured to send out a particular signal.
   * Selected elevator groups can be added and managed in Fire Alarm zones.
@@ Line 53: / Line 53: @@
 <callout type="info" icon="true">
 **Note**
-  * To configure the elevator control, the **AC Standard** License must be activated.
+  * To configure the elevator control, the **AC Advanced** License must be activated.
+  * Up to 4 readers can be selected under [Reader] of per floor configuration.
   * BioEntry Plus, BioLiteNet, and BioEntry W does not support OM-120
 </callout>