Differences

This shows you the differences between two versions of the page.

--- en:how_to_configure_secure_communication_between_device_and_server_tls_ssl [2018/01/03 09:22]
ethan tls version 추가
+++ en:how_to_configure_secure_communication_between_device_and_server_tls_ssl [2018/02/07 10:26]
ethan 지원장치 추가, FAQ 추가
@@ Line 33: / Line 33: @@
 - BioStation A2 FW 1.3.0 or later  \\
 - BioStation 2 FW 1.4.0 or later \\
+- FaceStation 2 FW 1.1.0 or later (to be released in 2018) \\
+- CoreStation FW 1.0.0 or later \\
+- P2 FW 1.0.0 or later \\
 </callout>
@@ Line 49: / Line 52: @@
 **Caution** \\
 Do not turn off the secure communication option if the device is physically disconnected from the network while using the secure communication feature. \\
-If the feature is turned off, the certificate of BioStar 2 will be deleted and the device will not be able to the server connect again. \\
+If the feature is turned off, the certificate of BioStar 2 will be deleted and the device will not be able to connect to the server again. \\
 To connect the device to the server again, the certificate saved in the device must be deleted or the device must be reset to factory default. \\
-For more details regarding factory default, refer to the manual of the device.
+For devices without LCD such as W2 or P2 you can factory default the device with the reset buttons as shown in the device manual. \\
+Refer to the FAQ article: [[http://support.supremainc.com/solution/articles/24000014900--both-biostar-network-and-factory-default-w2|Factory Default W2 / P2]]
 </callout>