Differences

This shows you the differences between two versions of the page.

--- en:how_to_configure_video_menu [2017/10/16 09:38]
kate created
+++ en:how_to_configure_video_menu [2018/05/02 14:22]
kate
@@ Line 1: / Line 1: @@
-====== How to Configure Video menu ======
+====== How to use video ======
-Video integration of BioStar2 – It’s simple integration to see recorded video and picture from NVR for certain log event. For video/picture confirmation, Realtime monitoring is not supported by BioStar2.
+Video integration of BioStar2 – It’s simple integration to see recorded video and picture from NVR for certain log events. For video/picture confirmation, Realtime monitoring is not supported by BioStar2.
+{{ :en:video_menu.mp4?800x450 |}}
 <callout type="primary" icon="true">
-Note: To use BioStar2 video feature, you should install BioStar2 v2.5 server on x64 machine and configure with Maria DB server. If BioStar2 server is installed with MS-SQL, Video feature of BioStar2 v2.5 is not supported.
+Note: To use BioStar2 video feature, you should install BioStar2 **v2.5** server on** x64** machine and configure with **Maria DB** server. If BioStar2 server is installed with MS-SQL, Video feature of BioStar2 v2.5 is not supported.
+</callout>
+<callout type="primary" icon="true">
+BioStar2 installation path stores a video file and an image file (C:\Program Files\BioStar 2(x64)\ve\records)
+System administrator should manage the storage of HDD
+These files will be kept for minimum 2 weeks as default parameter
+The period can be adjusted more than 2 weeks (Maximum 15 weeks)
+If the remaining storage of C drive is less than 10%, past recording files will be deleted in accordance with BioStar2 setting
 </callout>
@@ Line 14: / Line 29: @@
 .	Confirm if a license of BioStar2 AC standard is activated.
+The below figure is for BioStar2 v2.5.   You will need to have Video license additionally if you are using BioStar v2.6.
 {{:en:2_video.png?600|}}
@@ Line 22: / Line 39: @@
 {{:en:3_video.png?400|}}
+<callout type="primary" icon="true">
+**Supported NVR : ACTi, Dahua, Hikvision**
+</callout>
+<callout type="warning" icon="true">
+**Please confirm the following information and check your NVR connection with BioStar2 2.5 before you proceed your project.**
+. Hikvision NVR
+) SDK version: v5.2.771
+) Tested NVR list : DS-7608NI-E2, DS-7616NI-E2, iVMS4200 v2.4(PC-NVR)
+. Dahua NVR
+) SDK version: v2.14.50523
+) Tested NVR list : DH-NVR608-32-4K, DH-NVR4416, SmartPSS V1.13.1.R.20160504(PC-NVR)
+. Acti NVR
+) SDK version: v3.0.12.42
+) Tested NVR list : NVR3 V.3.0.13.27_20161128 Enterprise(PC-NVR)
+</callout>
 .	Click **[Add New NVR]** > Enter information of NVR
@@ Line 49: / Line 96: @@
 .	Make the certain log event to check the settings with NVR
+<callout type="primary" icon="true">
 Biostar2 will indicate the video/image after 3 mins.
+</callout>
 .	Go to **Monitoring** menu and click **Event log**
@@ Line 58: / Line 107: @@
-. BioStar2 supports large size of video file/image file.
+. If you click on [Large screen] from the left side, you can confirm large size of video file/image file.
 {{:en:10_video.png?800}}