Differences

This shows you the differences between two versions of the page.

--- en:unlimited_access_level_and_access_group_supported [2019/12/27 14:11]
jhlee2
+++ en:unlimited_access_level_and_access_group_supported [2021/12/20 10:15]
peterk
@@ Line 1: / Line 1: @@
 ====== Unlimited Access Level and Access Group Supported ======
-From BioStar 2 v2.7.3, unlimited  access level and access group are supported by BioStar 2 software.
+From BioStar 2 v2.7.3, unlimited access level and access group are supported by BioStar 2 software.
-But in current Suprema device firmware is not supported for unlimited access level and access group. (May, 2019
+But, in current Suprema device firmware unlimited access level and access group is not supported. (May, 2019)
-According to the capacity difference of devices, 1st generation entry level devices has more strict limitation then 2nd generation devices.
+According to the capacity difference for different devices, the 1st generation entry level devices have more strict limitation than the  2nd generation devices.
 Please refer an article below and check the capacity differences.
 \\
@@ Line 10: / Line 10: @@
 \\
 <callout type="warning" icon="true">
-  * If you generated more  access levels and access groups than device capability, devices would lose sync with BioStar 2 server.
+  * If you generate more access levels and access groups than the devices’ capabilities, devices would lose sync with BioStar 2 server.
   * If your device lost sync with Biostar 2 server, then the system would not operate properly.
 </callout>
@@ Line 16: / Line 16: @@
 {{ :en:3-1.png?nolink |}}
 \\
-<callout type="question" icon="true">
+<callout type="info" icon="true">
   * From BioStar 2 v2.7.3, Floor Level is supported without limitation.
   * Referred article : [BioStar 2] BioStar 2.7.3 Unlimited Floor Level Supported
 </callout>
 \\