Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
|
en:fs2_revision_note_150 [2021/11/09 13:41] sypark1 |
en:fs2_revision_note_150 [2021/11/09 13:42] (current) sypark1 |
||
|---|---|---|---|
| Line 11: | Line 11: | ||
| <text size="large">4.</text> Separated event logs of Mobile Access cards and RFID cards. \\ | <text size="large">4.</text> Separated event logs of Mobile Access cards and RFID cards. \\ | ||
| <text size="large">5.</text> Improved that the thermal camera works first when both the thermal camera and Wiegand bypass are set. \\ | <text size="large">5.</text> Improved that the thermal camera works first when both the thermal camera and Wiegand bypass are set. \\ | ||
| - | <text size="large">6.</text> Changed to a new touch pad \\ | + | <text size="large">6.</text> Changed to a new touch pad. \\ |
| - | * For devices with firmware version 1.4.2 or earlier, please follow the instructions below when replacing the front cover (touch pad). | + | <callout type="primary" icon="true"> |
| + | For devices with firmware version 1.4.2 or earlier, please follow the instructions below when replacing the front cover (touch pad). | ||
| + | * Replace the front cover after upgrading the firmware to version 1.5.0 or later. | ||
| + | * If you have already replaced the front cover before upgrading the firmware to version 1.5.0 or later, please upgrade to the latest version firmware again. \\ | ||
| + | </callout> | ||