Differences

This shows you the differences between two versions of the page.

--- en:how_to_use_timed_anti_passback [2024/12/18 11:41]
jake
+++ en:how_to_use_timed_anti_passback [2024/12/18 12:58] (current)
jake
@@ Line 44: / Line 44: @@
   * **Case 1. A case where you already use "anti-passback" in ZONE** \\ If you try to set the "Timed Anti Passback" after configuring the Anti-passback zone, you will see the error popup below. On the contrary, when you try configuring the Anti-passback zone after already setting the "Timed Anti Passback," you will also see the error popup below. {{:en:6t.png?700|}}
-  * **Case 2. In case you want to set "anti-passback" in DOOR** \\ If Soft APB or Hard APB in Anti PassBack, the option "Timed APB" will be automatically deactivated. Timed Anti Passback CAN NOT BE USED WITH Anti PassBack Soft APB or Hard APB. {{:en:7t.png?700|}}
+  * **Case 2. In case you want to set "anti-passback" in DOOR** \\ If Soft APB or Hard APB in Anti PassBack, the option "Timed APB" will be automatically deactivated. Timed Anti Passback CAN NOT BE USED WITH Anti PassBack Soft APB or Hard APB. \\ {{:en:7t.png?700|}}
 . Supports the Alarm Function \\
-  * **If using BioStar 2 v2.9.7 or lower version:** \\ The alarm function Does Not support "Timed Anti Passback" yet but only supports "Anti PassBack" in the configured door.
+  * **If using BioStar 2 v2.9.7 or lower version:** \\ The alarm function Does Not support "Timed Anti Passback" yet but only supports "Anti PassBack" in the configured door. \\ {{:en:8t.png?700|}}
+  * **If using BioStar 2 v2.9.8 or higher version:** \\ The alarm function supports both "Timed Anti Passback" and "Anti PassBack" for the configured door. \\ {{:en:9t.png?700|}}
+. If the door is set up with a wireless door lock, "Timed Anti Passback" CAN NOT be used. \\
+. "Timed Anti PassBack" and "Use sensor when Entry Confirmed APB" enabled features cannot be used simultaneously. \\ {{:en:10t.png?700|}}
+===== Execution Procedure =====
+=== Step 1. Click DOOR in BioStar 2 ===
+{{:en:11t.png?300|}}
+=== Step 2. Click ADD DOOR ===
+{{:en:12t.png?300|}}
+=== Step 3. Set the configuration you want to use ===
+{{:en:13t.png?300|}}
+<callout type="primary" icon="true">
+You can select the "Entry device only" or the "Entry device + Exit device" depending on your environment. \\
+{{:en:14t.png?400|}}
+</callout>
+=== Step 4. ===
+  * **If using BioStar 2 v2.9.7 or lower version** \\ : Enable "Timed APB" and set the applicable "Reset Time" in Timed Anti PassBack. After completing it, click Apply. \\ {{:en:15t.png?400|}} \\ After completing it, if you want set "Bypass Group", select some specific access groups in "Bypass Group" \\ {{:en:16t.png?400|}} \\ And then, if you want to set the Alarm for "Timed Anti PassBack", configure the alarm by clicking the Add button. If completing all settings, click Apply. \\ {{:en:17t.png?400|}}
+=== Step 5. After completing Step 4, you can go through the set door (if using BioStar 2 v2.9.7 or lower version) or the set device (if using BioStar 2 v2.9.8 or higher version) only after the set-"Reset Time" has passed. ===
+For example, if you set the "Reset Time" to 1 minute, you can go through the set door 1 minute only after you have passed. \\
+<callout type="primary" icon="true">
+If you want to disable the set "Timed Anti PassBack", please follow the below guide per the BioStar 2 version used. \\ **1) If using BioStar 2 v2.9.7 or lower version,** \\ : Disable "Timed APB" and click Apply. \\ {{:en:18t.png?400|}} \\ **2) If using BioStar 2 v2.9.8 or higher version,** \\ : Select "No device" and click Apply. \\ {{:en:19t.png?400|}}
+</callout>