Differences
This shows you the differences between two versions of the page.
|
en:xpd2_rev2_revision_note_172 [2023/11/27 14:52] mashin created |
en:xpd2_rev2_revision_note_172 [2024/10/22 17:06] (current) mashin |
||
|---|---|---|---|
| Line 6: | Line 6: | ||
| <callout type="primary" icon="true"> | <callout type="primary" icon="true"> | ||
| Devices with the new BLE chip cannot downgrade to a lower version after upgrading the firmware to v1.7.0 or higher. Devices with existing BLE chips can be downgraded to a lower version.\\ | Devices with the new BLE chip cannot downgrade to a lower version after upgrading the firmware to v1.7.0 or higher. Devices with existing BLE chips can be downgraded to a lower version.\\ | ||
| - | For more information, check the serial number of the device and contact the Suprema. (supremainc.com) | + | For more information, check the serial number of the device and contact the Suprema. (https://supremainc.com) |
| </callout> | </callout> | ||
| \\ | \\ | ||
| ==== Bug Fixes ==== | ==== Bug Fixes ==== | ||
| - | <text size="large">1.</text> When running the Device Manager application v1.1.8 on iOS, certain devices do not connect. (Affects version: v1.7.0) | + | <text size="large">1.</text> When running the Device Manager application v1.1.8 on iOS, certain devices do not connect. (Affects version: v1.7.0)\\ |
| + | |||
| + | <text size="large">2.</text> Custom smart card byte order is affected by the CSN card byte order setting. (Affects version: v1.7.1)\\ | ||
| + | |||
| + | <text size="large">3.</text> In the Device Manager application, there is an issue where the default **Encryption Type** is set to ‘DES/3DES’ instead of ‘AES’ when configuring a **DESFire** card in the **Suprema Smart Card Layout** tab. (Affects version: v1.0.0) | ||