2018-07-31
1. Support the issuance of Secure Credential Card without the fingerprints when registering iCLASS 2K card.
2. Support OP6 fingerprint sensor.
3. Support for connecting new devices.
1. The bypass does not work when authentication with AoC in Wiegand output.
2. Event logs and real-time logs are not uploaded normally to BioStar 2.
3. The device’s time is kept in daylight saving time even after the set daylight saving time is over.
4. The device does not work as set for relay alarms when connecting Secure I/O 2 as a slave to the device.
5. User Export is executed even though there is no saved user.
6. The pop-up message is not displayed properly if the finger does not place exactly in the center of the sensor when enrolling the fingerprint while using Advanced Enrollment and View Image.
7. The arm/disarm key is displayed on a device not included in the intrusion alarm zone.
8. Wiegand Reader could not be unlocked.
9. The device restarts when authenticating with an unregistered fingerprint.
10. An empty file is created when running USB Export, even though there is saved data.
11. The device cannot read CSN because the card recognized as an NFC tag.
12. “USB Connection Fail” message is displayed when the encryption key does not match during data import.
13. The device recognizes the smart card as a CSN card when changing the primary key of the smart card to the secondary key.
14. The device restarts when authentication fails.
15. The device continuously restarts when configuring the device in BioStar 2 as follows: