When you use a Suprema device to send Wiegand signals to a controller, you will always have one LED / Sound type that shows on reading the card regardless of authentication success or failure on the controller side.
In BioStar version 2.4 and above, you can control the device LED / Sound with the controller using the device input.
You must update the firmware of the devices to the versions compatible with BioStar 2.4.
The devices (with LCD) that can use the Pop-up / Sound control features are as follows:
The devices (without LCD) that can use the LED / Sound control features are as follows:
1. Log in to BioStar 2.
2. Go to DEVICE menu.
3. Click on the desired device.
4. Go to Advanced > Trigger & Action.
5. Click + Add.
6. On Trigger select Input.
7. Choose which input Port will be used for this function.
8. Configure the Switch, Duration of the input signal, and used Schedule as necessary.
9. On Action select Function.
10. On the Configuration option choose your desired action.
[Configuration options of devices with LCD]
[Configuration options of devices without LCD]
Configuration - BioStation 2 input 0 configured to Access Granted and BioStation 2 input 1 configured to Access Denied.
Result - On making a signal to input 0, the device will show an Access Granted icon and make an Access Granted sound.
On making a signal to input 1, the device will show an Access Denied icon and make an Access Denied sound.