From BioStar 2.7.8, you can select multiple cards on devices that support various types of cards.
From BioStar 2.8.14, you can select the card types you’d like to use among the dual Frequency cards. In other words, you can inactivate the unused card types.
If you are using BioStar 2.7.8, you can select multiple card types and set 'BioStar 2 > DEVICE > Card Type'.
Please note that if you want to select multiple card types, upgrade to FW that supports this feature.
Please refer to the table below for the compatible FW versions.
BioEntry P2 1.3.0 or above
BioEntry R2 1.3.0 or above
BioEntry W2 1.4.0 or above
BioLite N2 1.2.0 or above
BioStation 2 1.8.0 or above
BioStation A2 1.7.0 or above
BioStation L2 1.5.0 or above
FaceLite 1.1.0 or above
FaceStation 2 1.3.0 or above
XPass 2 1.1.0 or above
XPass D2 1.2.0 or above
FaceStation F2 1.0.0 or above
X-Station 2 1.0.0 or above