Old revisions Add to book Export to PDF Fold/unfold all Book Creator Add this page to your book Book Creator Remove this page from your book Manage book (0 page(s)) Help This is an old revision of the document! 버전 1.4.1 (V1.4.1_210511) 날짜 2021-06-01 Bug Fixes 1. Card data were output with the wrong BitCount while the device was communicating with a 3rd party controller via OSDP. (Affects version: v1.0.0) 2. While the device was communicating with a 3rd party controller via OSDP, the device connected as a slave responded that it supported transparent mode by OSDP_PDCAP even though it did not actually support that mode. (Affects version: v.1.0.0) 3. It was not able to communicate with a 3rd-party controller via OSDP with the default key before network initialization. (only for devices released with the firmware version 1.4.0 or later) (Affects version: v1.4.0) 4. It was able to communicate using default keys after changing the key settings when the device was connected to a 3rd-party device via OSDP. (Affects version: v1.3.0) 5. After initializing the slave device’s settings, it was not able to connect it to a 3rd-party controller. (Affects version: v1.0.0) 6. Secure communication was not available by using the default key after downgrading firmware to version 1.3.1 or below which does not support encryption. (Affects version: v1.4.0)