Book Creator
 Add this page to your book
Book Creator
 Remove this page from your book  

 Manage book (0 page(s))
 Help

Version 1.4.3 (V1.4.3_250602)

Release

2025-06-04

  • The XP2-MAPB-H model cannot downgrade to firmware version v1.4.3 or lower.
  • The XP2-GKDPB model with hardware v1.2.0 or higher cannot downgrade firmware to lower than v1.4.3. The hardware version can be checked in the DEVICE menu of BioStar 2.
  • Devices with the new BLE chip cannot downgrade to a lower version after upgrading the firmware to v1.3.1 or higher. Devices with existing BLE chips can be downgraded to a lower version.

For more information, check the serial number of the device and contact the Suprema (https://supremainc.com).

New Features and Improvements

1. Added new model.

  • XP2-MAPB-H

2. Supports Keypad Backlight configuration.

  • XPass 2 (XP2-GKDPB) hardware v1.2.0 or higher, firmware v1.4.3 or higher.

3. Added identification code to support recognition of the latest cards.

  • DESFire EV3

4. Supports SL1, SL3, and SL1/SL3 Mix Mode for security level compatibility with MIFARE Plus EV1 cards.

  • SL1: Compatible mode with MIFARE Classic
  • SL3: Advanced security mode based on AES

5. Supports the Ignore Repeated Signals Duration feature, which ignores repetitive authentication signals from the controller when the device is connected to a 3rd party controller via Wiegand.
6. Supports not logging events when the Ignore Repeated Signals Duration feature is activated.


Bug Fixes

1. When a user with more than two cards enrolled attempts card authentication to the Wiegand output device, the ID of a card other than the authenticated card is output. (Affects version: v1.4.1)
2. When using the BS2_GetDeviceCapabilities function in the SDK to get information supported by the device, the CustomClassicPlus and CustomDesFireEV1 are displayed as False though the device supports custom smart cards. (Affects version: v1.4.1)
3. When authentication is successful using the Secondary Key, and the Secondary Key is then set to Not Use, authentication fails even if the Primary Key is valid. (Affects version: v1.0.0)
4. Authentication fails with a 'period expired' message when using a smart card issued with a visual face included. (Affects version: v1.0.0)