Differences

This shows you the differences between two versions of the page.

--- en:1xfaq_how_to_upgrade_biostar [2016/10/06 08:52]
127.0.0.1 external edit
+++ en:1xfaq_how_to_upgrade_biostar [2019/12/30 10:36] (current)
nykwon [Upgrade Procedure] - adding primary note
@@ Line 7: / Line 7: @@
 <callout type="primary" icon="true">
-If you have a BioStar version lower than 1.52 installed, you cannot upgrade to versions above 1.52 by simply deleting and installing the most recent BioStar.
+If you have a BioStar version lower than 1.52 installed, you cannot upgrade to versions above 1.52 by simply deleting and installing the most recent BioStar **unless you are upgrading to 1.93**. \\
-You will have to follow the procedure shown in the [[1xfaq_how_to_resolve_a_database_compatibility_issue]] to upgrade without any issues.
+You will have to follow the procedure shown in the [[1xfaq_how_to_resolve_a_database_compatibility_issue]] to upgrade without any issues. \\
+\\
+* If you are upgrading to BioStar 1.93 you can follow the upgrade procedure below regardless of what current version you are on.
 </callout>
+<callout type="primary" icon="true">
+**Software License**\\
+If you are using a software license (not a dongle) for BioStar Standard version, back up the BioStar.lic file in //C:\Program Files(x86)\BioStar\server// and paste it to the same location in your upgraded server.\\
+{{:bs1_software_license.png?400|}}
+</callout>
 ==== Upgrade Procedure ====
+<callout type="primary" icon="true">
+If you're upgrading to the latest version of BioStar 1 to use [[https://support.supremainc.com/a/solutions/articles/24000007131?lang=en|2nd generation devices]], read the following article before proceeding\\ - [[https://support.supremainc.com/a/solutions/articles/24000018330?lang=en|[BioStar 1] Limitations with 2nd Generation Devices in BioStar 1.93]]
+</callout>
 Deleting BioStar will not delete your database but please back up your database so that you may revert your database if the database upgrade fails.
@@ Line 22: / Line 33: @@
 {{:en:1xfaq_upgradebiostar_001.png?nolink&800|}}
 \\ \\
-. Download the most recent version of BioStar installation file: [[https://www.supremainc.com/en/biostar-1-installer|Download link]].
+. Download the most recent version of BioStar installation file: [[https://www.supremainc.com/en/support/biostar-1-pakage.asp|Download link]].
 \\
 <callout type="info" icon="true">
-If you are only using 1.x devices we recommend that you install [[https://www.supremainc.com/en/content/softwarebiostar-1-19-cd-image|BioStar 1.9]].  </callout>
+If you are only using 1.x devices we recommend that you install [[http://gofile.me/471Oh/cdILwPEw7|BioStar 1.9]].  </callout>
 \\
 . Install BioStar with the setup file. \\
 {{:en:1xfaq_upgradebiostar_002.png?nolink&700|}}  \\ \\
-. After the installation finishes, open BioStar Server Config with administrator privileges and check that your database Server and authentication is set properly and click apply. \\
+. After the installation finishes, open BioStar Server Config with administrator privileges and check that your database Server and authentication are set properly and click apply. \\
 {{:en:1xfaq_upgradebiostar_003.png?nolink&600|}}  \\ \\
@@ Line 47: / Line 58: @@
-<callout type="info" icon="true">If you are having issues with the upgrade, please contact [[support@supremainc.com]]. </callout>
+<callout type="info" icon="true">If you are having issues with the upgrade, please refer to an article of [[https://support.supremainc.com/en/support/home|Fresh Desk]] and contact Suprema TS team. </callout>