Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision 		Previous revision
en:how_to_configure_an_alert_pop-up_message_when_a_device_is_disconnected [2017/10/12 13:10]
jypark created 		en:how_to_configure_an_alert_pop-up_message_when_a_device_is_disconnected [2022/12/28 17:21] (current)
phit
Line 1: Line 1:
 {{tag>"​System Configuration"​ "​BioStar 2"}} {{tag>"​System Configuration"​ "​BioStar 2"}}
  
-===== How to configure an alert pop-up message when a device is disconnected ===== +  ​
-----+
  
-From BioStar 2.5.0, you can configure an alert message ​about the device disconnection detected. When a device is disconnected, the alert message will be shown as a pop-up message. \\ \\+===== How to configure an alert pop-up ​message ​when a device is disconnected ​===== 
  
-Go to **Setting** > **ALERT**.+---- 
  
-{{:​en:​2x_sc_alert_1.png?​nolink&​800|}} \\ \\+  ​
  
-Check the box named **Device Disconnection Detected** and then click **Apply** button.+From BioStar 2 Version 2.5.0, user can configure an alert message for the device disconnection detected. When a device is disconnected,​ the alert message will be shown as a pop-up message on the screen of BioStar 2. \\ \\ 
  
-{{:​en:​2x_sc_alert_2.png?​nolink&​800|}} \\ \\+  ​
  
-At this stage, if you want to describe an alert message, you can click note shaped icon and enter **Name** and **Message**.+Go to **Setting** → **ALERT**. 
  
-{{:​en:​2x_sc_alert_3.png?​nolink&​800|}} \\ \\+  ​
  
-When a device is disconnected,​ the alert message will be displayed like below.+{{:​en:​2x_sc_alert_1.png?​nolink&​800|}} \\ \\ 
  
-{{:​en:​2x_sc_alert_4.png?​nolink&​800|}} \\ \\+   
 + 
 +Check the box named **Device Disconnection Detected** and then click **Apply** button.  
 + 
 +{{:​en:​device_disconnection_detected_alert_setting.jpg?​nolink&​1200|}}\\ \\  
 + 
 +   
 + 
 +At this stage, you can edit/ customize the alert message by clicking note/ document shaped icon and enter **Name** and **Message**.  
 + 
 +   
 + 
 +{{:​en:​2x_sc_alert_3.png?​nolink&​800|}} \\ \\  
 + 
 +   
 + 
 +When the device gets disconnected,​ the alert message will be displayed below.  
 + 
 +   
 + 
 +{{:​en:​2x_sc_alert_4.png?​nolink&​800|}} \\ \\  
 + 
 +   
 + 
 +{{:​en:​how_to_configure_an_alert_pop-up_message_when_a_device_is_disconnected.mp4?​900x506 |}} \\