Differences

This shows you the differences between two versions of the page.

Link to this comparison view

en:how_to_configure_an_occupancy_limit_zone [2021/07/24 11:20]
jhlee2 created
en:how_to_configure_an_occupancy_limit_zone [2021/12/20 10:36] (current)
peterk
Line 2: Line 2:
 ^Affect Products & Versions | ^Affect Products & Versions |
 ^Device |FaceStation 2 v1.5.0 or later\\ FaceStaiton F2 v1.1.0 or later | ^Device |FaceStation 2 v1.5.0 or later\\ FaceStaiton F2 v1.1.0 or later |
-^BioStar 2 |BioStar v2.8.11 or above |+^BioStar 2 |BioStar v2.8.11 or later |
  
-The Occupancy Limit Zone enables an administrator to manage and control the population density of a place to prevent overcrowding and monitor the zone status. You can use this feature to manage the indoor space to avoid overcrowding ​due to COVID-19. Suprema'​s Occupancy Limit Zone allows only a limited number of people to enter based on the authentication record from the entry/exit device and restricts entry beyond that, enabling monitoring of the occupants in the zone.+The Occupancy Limit Zone enables an administrator to manage and control the population density of a place to prevent overcrowding and monitor the zone status. You can use this feature to manage the indoor space to avoid overcrowding ​for COVID-19 ​policies. Suprema'​s Occupancy Limit Zone allows only a limited number of people to enter based on the authentication record from the entry/exit device and restricts entry beyond that, enabling monitoring of the occupants in the zone.
 <callout type="​warning"​ icon="​true"> ​ <callout type="​warning"​ icon="​true"> ​
   * BioStar 2 AC license is required to use the Occupancy Limit Zone feature.   * BioStar 2 AC license is required to use the Occupancy Limit Zone feature.
Line 11: Line 11:
  
 ===== How to Configure Occupancy Limit Zone ===== ===== How to Configure Occupancy Limit Zone =====
-You can set the Occupancy Limit Zone according to the indications ​below.+You can set the Occupancy Limit Zone following ​the steps below.
 \\ \\
 ====Step 1: Go [Zone] and click [Add Zone]==== ====Step 1: Go [Zone] and click [Add Zone]====
Line 34: Line 34:
 \\ \\
 Count Alert: Set an alert to an administrator or set to save event logs before Count reaches the occupancy limit.\\ Count Alert: Set an alert to an administrator or set to save event logs before Count reaches the occupancy limit.\\
-  * You can set up two alerts and only enter numbers smaller than the Limit value. The values of both alerts must be different.+  * You can set up two alerts and should ​enter numbers smaller than the Limit value. The values of the alerts must be different.
 {{ :​en:​olzone_5.png?​nolink |}} {{ :​en:​olzone_5.png?​nolink |}}
 \\ \\
Line 40: Line 40:
 {{ :​en:​olzone_6.png?​nolink |}} {{ :​en:​olzone_6.png?​nolink |}}
 \\ \\
-Network Failure Action: Set whether to allow users to enter or leave when a network error occurs in the device set in the zone. If you set it to Allow Entry and Exit, it stops entry restrictions when the device loses network connection, ​and people can enter the zone even if Count in the zone exceeds the occupancy limit.\\+Network Failure Action: Set whether to allow users to enter or leave when a network error occurs in the device set in the zone. If you set it to Allow Entry and Exit, it stops entry restrictions when the device loses network connection, ​so people can enter the zone even if Count in the zone exceeds the occupancy limit.\\
 {{ :​en:​olzone_7.png?​nolink |}} {{ :​en:​olzone_7.png?​nolink |}}
 \\ \\
-====Step 5: If there are users who can access this zone without restriction, set it as Bypass Group====+====Step 5: If there are users who should be able to access this zone regardless of the rules, set Bypass Group====
 {{ :​en:​olzone_8.png?​nolink |}} {{ :​en:​olzone_8.png?​nolink |}}
 \\ \\
Line 49: Line 49:
 ===== Video Demonstration ===== ===== Video Demonstration =====
 {{ youtube>​wwkZZ2L53a4?​800x540 }} {{ youtube>​wwkZZ2L53a4?​800x540 }}
 +