Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
en:how_to_configure_custom_admin_about_monitoring_section [2018/10/02 13:53] conan |
en:how_to_configure_custom_admin_about_monitoring_section [2018/10/11 08:30] (current) conan |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ===== How to configure Custom Admin about Monitoring section ===== | ===== How to configure Custom Admin about Monitoring section ===== | ||
| ---- | ---- | ||
| - | * If you have updated to BioStar 2.6.3, please refer to the top section, if you are using versions up to 2.6.2, please scroll down and find "Up to 2.6.2" | + | If you would like to find out what has changed since BioStar 2.6 and above, with regards to Custom Level, please refer to the article \\ |
| + | [[en:how_to_configure_a_custom_level|]] \\ | ||
| - | *From BioStar 2.6.3 \\ | ||
| - | From BioStar 2.6.3, the Admin Item Setting is changed so that a custom level can be assigned for a specific User Group, Device Group, Door Group, and Access Group. Also Monitoring menu is now allowing the administrator to assign "Read" rights. \\ | ||
| - | |||
| - | 1. Go to the **Settings** > **ACCOUNT**. \\ | ||
| - | {{:en:biostar2_custom_level_1.png?nolink&800|}} \\ \\ | ||
| - | |||
| - | 2. Create new Custom Level. At this point, you can configure the item settings and menu settings. \\ | ||
| - | {{:en:custom_level_-_2.6.3.png?nolink&1000|}} | ||
| - | |||
| - | |||
| - | <callout type="tip" icon="true"> | ||
| - | Unlike BioStar 2.6.2, the custom items exclusively made for Monitoring menu has been removed. This is from the belief that the Item Settings should be applied for the whole custom level, not only for a single menu.\\ | ||
| - | </callout> | ||
| - | |||
| - | * Real-time Logs and event logs are filtered based on below condition. | ||
| - | |||
| - | <callout type="tip" icon="true"> | ||
| - | Selected User Group **AND** Device Group (excluding Access Group Status). | ||
| - | </callout> | ||
| - | |||
| - | * Door Status is displayed based on selected Door Group. | ||
| - | * Device Status is displayed based on selected Device Group or Device ID. | ||
| - | * User Status is displayed based on selected User Group | ||
| - | * Event Status is displayed based on selected Event | ||
| - | |||
| - | {{:en:real-time_log.png?nolink&1000|}} | ||
| - | |||
| - | *Up to BioStar 2.6.2\\ | ||
| In BioStar 2.5 or below, all users who have the privilege of Monitoring can see all event logs which are generated in the Monitoring section. From Biostar 2.6, you can configure the accessible custom items such as User, Device, Door, Elevator and Zone to limit the items that can be monitored. \\ \\ | In BioStar 2.5 or below, all users who have the privilege of Monitoring can see all event logs which are generated in the Monitoring section. From Biostar 2.6, you can configure the accessible custom items such as User, Device, Door, Elevator and Zone to limit the items that can be monitored. \\ \\ | ||