Differences

This shows you the differences between two versions of the page.

Link to this comparison view

en:how_to_configure_firealarm_zone [2016/07/08 13:27]
127.0.0.1 external edit
en:how_to_configure_firealarm_zone [2021/12/20 10:17] (current)
peterk
Line 3: Line 3:
 ===== How to configure Fire Alarm Zone? ===== ===== How to configure Fire Alarm Zone? =====
 ---- ----
-Before you start, check the license activation status. If the standard edition is activated, the '​ZONE'​ tap can be seen from the left menu buttons as below. ​ Also, check the fundamental course to understand the difference between '​Global Zone' and 'Local Zone'​. ​+Before you start, check your license activation status. If standard edition is activated, the '​ZONE'​ tap can be seen on the left menu buttons as below. ​ Also, check the fundamental course to understand the difference between '​Global Zone' and 'Local Zone'​. ​
  
 1. Go to **ZONE** and click **ADD ZONE** button. ​ 1. Go to **ZONE** and click **ADD ZONE** button. ​
Line 18: Line 18:
 {{:​en:​73.png?​nolink&​800|}} \\ {{:​en:​73.png?​nolink&​800|}} \\
  
-3. Choose doors to be in the fire alarm zone and select ​an device input to receive ​fire alarm signal. \\+3. Choose ​the doors that will be in the fire alarm zone and select ​device input to receive fire alarm signals. \\
    
 {{:​en:​72.png?​nolink&​800|}} \\ {{:​en:​72.png?​nolink&​800|}} \\
Line 28: Line 28:
  
  
-5. When it's set to use '​Global Zone', ​the below warning message pops up to remind the importance of the stable server status. \\+5. When it's set to use '​Global Zone', ​warning message pops up to remind the importance of the stable server status. \\
  
 {{:​en:​75.png?​nolink&​400|}} \\ {{:​en:​75.png?​nolink&​400|}} \\
Line 39: Line 39:
  
  
-7. Mark the zone and click **Clear Alarm** button. Then, the doors go back to the original status. ​ \\+7. Mark the zone and click **Clear Alarm** button. Then, the doors will go back to their original status. ​ \\
  
 {{:​en:​79.png?​nolink&​800|}} \\ {{:​en:​79.png?​nolink&​800|}} \\