Old revisions Add to book Export to PDF Book Creator Add this page to your book Book Creator Remove this page from your book Manage book (0 page(s)) Help System Configuration, BioStar 2, Web Client How to Connect to the Web Client Since BioStar 2 has a web-based client. You do not have to install the client on the PC you are accessing from! Below is how to access your web-client. Accessing from the same network If you’re accessing the client from the same network, it is important to know your Web Server HTTPS port. This setting can be found in your BioStar Setting. Now that you know your port, you can use the following to connect to the client if you’re on the server PC: localhost:[Port #] Example- localhost:443 127.0.0.1:[Port #] Example- 127.0.0.1:443 Clicking on BioStar 2 icon. Do not use ‘localhost’ with HTTPS to access BioStar 2. (Due to Security concerns) The localhost option does not work for HTTP in BioStar 2.6 and above. You have to input the full IP as shown below. If you’re accessing the client from another PC in the network, you would have to enter the IP of the server PC and the port number: [Server PC IP]:[HTTP Port#] Example- 192.168.0.14:443 Accessing from an external network If you want to access the web client from an external network, you first have to set your Biostar Cloud. Please refer to How to configure Cloud and Mobile App to set up your BioStar Cloud. After setting up your cloud, enter the following to access BioStar 2: Example : https:{your domain name}.biostar2.com]