Differences
This shows you the differences between two versions of the page.
| Next revision | Previous revision | ||
|
en:how_to_enroll_users [2016/07/08 13:37] 127.0.0.1 external edit |
en:how_to_enroll_users [2021/11/17 09:42] (current) peterk |
||
|---|---|---|---|
| Line 5: | Line 5: | ||
| Although there are various ways of adding new users to your system, the below three methods are most frequently used. | Although there are various ways of adding new users to your system, the below three methods are most frequently used. | ||
| - | \\ First is to add new users to the BioStar 2 server directly and transfer the data to the devices. | + | \\ 1. Adding new users to the BioStar 2 server directly and synchronizing the data to the devices. |
| - | \\ Second is to add new users through BioStar 2 mobile app directly to the server and transfer to the devices. | + | \\ 2. Adding new users through BioStar 2 mobile app directly to the server and synchronizing the data to the devices. |
| - | \\ Last is to add users from the device and pull them to the server, and transfer to the other devices. | + | \\ 3. Adding users from the device and pulling them to the server, and transferring to the other devices from the server. |
| + | \\ - If the **‘Automatic User Synchronization’** option is turned on, it will transfer the data automatically. Check the link below for detailed information. http://kb.supremainc.com/knowledge/doku.php?id=en:how_to_synchronize_user_data_enrolled_from_the_device&s[]=user&s[]=sync | ||
| - | Here, the second method is covered and explained in detail. | + | |
| + | In this article, the #1 method is covered and explained in detail. | ||
| \\ | \\ | ||
| Line 21: | Line 23: | ||
| \\ | \\ | ||
| - | 2. Fill out the mandatory fields and additional fields in the information section. The mandatory fields are **Name** and **ID**. And if you want to allow the user to use a mobile app, the user should be set to have one of BioStar Operator levels and its Login ID and Password. | + | 2. Fill out the mandatory and optional fields in the information section. The mandatory fields are **Name** and **ID**. And if you want to allow the user to use the mobile app, you can set the user to have one of BioStar Operator levels and its Login ID and Password. |
| \\ | \\ | ||
| {{:en:2.png?nolink&800|}} | {{:en:2.png?nolink&800|}} | ||
| \\ | \\ | ||
| - | 3. Choose credentials you want to assign. For the PIN, it's required to input four digits or higher numbers, and Auth Mode indicates whether you use private authentication mode for this user. And when you enroll fingerprints, make sure to start with the high quality score(80 is recommended).This is because poor fingerprint quality can affect matching performance. | + | 3. Choose credentials you want to assign. |
| + | \\ | ||
| + | {{:en:11.jpg?nolink&800|}} | ||
| + | |||
| + | For the PIN, it's required to input four digits or higher numbers, and Auth Mode indicates whether you use private authentication mode for this user. And when you enroll fingerprints, make sure to start with the high-quality score(80 is recommended).This is because poor fingerprint quality can affect the matching performance. | ||
| + | \\ | ||
| + | \\ | ||
| + | * QR/Barcode: | ||
| + | \\ | ||
| + | [[https://support.supremainc.com/en/support/solutions/articles/24000068744--biostar-2-how-to-issue-biostar-2-qr-in-biostar-2-sw|How to Issue BioStar 2 QR]] | ||
| + | \\ | ||
| + | [[https://support.supremainc.com/en/support/solutions/articles/24000068745--biostar-2-how-to-use-third-party-qr-in-biostar-2|How To User Third party QR]] | ||
| + | \\ | ||
| + | \\ | ||
| - | Fingerprint enrollment steps: | + | 3.1. Fingerprint enrollment steps: |
| - | * Select device | + | * 1. Select device |
| - | * Set the quality score to 80 or higher | + | * 2. Set the quality score to 80 or higher |
| - | * Click '+Add' button and select the fingerprint number, such as 1st and 2nd | + | * 3. Click '+Add' button and select the fingerprint number, for instance, 1st and 2nd |
| - | * Click Scan button and put your fingerprint on the sensor | + | * 4. Click Scan button and scan your fingerprint on the sensor |
| - | * Follow the direction and click 'Enroll' button after checking the enrolled fingerprint status | + | * 5. Follow the direction and click 'Enroll' button after checking the enrolled fingerprint status |
| <callout type="tip" icon="true"> | <callout type="tip" icon="true"> | ||
| 10 different fingerprints for one user can be enrolled. | 10 different fingerprints for one user can be enrolled. | ||
| - | \\ Duress fingerprint can be used to active different relay through trigger and action setting. | ||
| </callout> | </callout> | ||
| Line 45: | Line 59: | ||
| \\ | \\ | ||
| + | 3.2 Face enrollment steps: | ||
| + | Available devices: FaceStation 2, FaceLite | ||
| + | * 1. Select device | ||
| + | * 2. Click '+Add' button and select the Face number, for instance, 1st and 2nd | ||
| + | * 3. Click Scan button and scan your face in front of the device | ||
| + | * 4. Follow the direction and click 'Enroll' button after checking the enrolled face status | ||
| + | FaceStation 2 and FaceLite can have up to 5 faces per user. | ||
| + | |||
| + | 3.3 Visual Face enrollment steps: | ||
| + | Available devices: FaceStation F2 | ||
| + | * 1. Select device | ||
| + | * 2. Click '+Add' button and select the Face number, for instance, 1st and 2nd | ||
| + | * 3. Click Scan button and scan your face in front of the device | ||
| + | * 3-1. Click [Upload Image] if you have the photo for the user | ||
| + | * 4. Follow the direction and click 'Enroll' button after checking the enrolled face status | ||
| + | FaceStation F2 can have up to 2 faces per user. | ||
| + | For more details, please refer to the below article. | ||
| + | • How to Enroll Visual Face Credential | ||
| - | 4. Enroll new cards by clicking '+Card' button. Eight number of cards can be enrolled for one user. \\ | + | 4. Enroll new cards by clicking '+Card' button. A total of 8 cards can be enrolled for one user. \\ |
| Three different registration methods are supported: | Three different registration methods are supported: | ||