Differences

This shows you the differences between two versions of the page.

--- en:manage_users_in_device_overview [2018/12/26 14:18]
yjjung created
+++ en:manage_users_in_device_overview [2021/12/29 14:46] (current)
peterk
@@ Line 1: / Line 1: @@
 ===== Manage users in Device Overview =====
 ----
-Sometimes users suffer sync error because they didn’t notice that user information exceeded the capacity in the device. For example, up to 3,000 face can be stored in FS2 device with 1:N authentication mode but if BioStar exceeds this number, sync error will occur but some users don’t know the reason.
+Sometimes users face sync error because they didn’t notice that user information exceeded the capacity of the device. For example, up to 3,000 face can be stored in FS2 device with 1:N authentication mode but, if BioStar exceeds this number, sync error will occur but some users do not know the reason.
-{{:en:manageusersindevice_01.jpg?nolink&1200|}}
+{{:en:manageusersindevice_01.jpg?nolink&1100|}}
-To prevent this situation, you can see how many users, templates and cards are in the device from BioStar 2.7.0
+To prevent this situation, you can see how many users, templates and cards can be stored in the device from BioStar 2.7.0
 **Compatible firmware**
@@ Line 17: / Line 17: @@
   *   BioEntry P2: 1.2.0 or later
   *   BioLite N2: 1.1.0 or later
+  *   FaceLite: 1.0.0 or later
+  *   FaceStation F2: 1.0.0 or later
+  *   XPass 2: 1.0.0 or later
+  *   X-Station 2: 1.0.0 or later
 <callout type="info" icon="true">
   * Entry devices with firmware version V2.x are not supported.
 </callout>
-{{:en:manageusersindevice_02.jpg?nolink&800|}}
+{{:en:manageusersindevice_02.jpg?nolink&700|}}