Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
|
en:supports_setting_the_byte_order_for_smart_cards [2022/04/28 08:59] jhlee2 |
en:supports_setting_the_byte_order_for_smart_cards [2022/04/28 09:00] (current) jhlee2 |
||
|---|---|---|---|
| Line 14: | Line 14: | ||
| \\ | \\ | ||
| \\ | \\ | ||
| - | ===== 1. This function is supported only when the Suprema device is directly connected to BioStar 2 via Ethernet. ===== | + | === 1. This function is supported only when the Suprema device is directly connected to BioStar 2 via Ethernet. === |
| * RS-485 Mode: Default, Master, Slave (but connected via Ethernet) | * RS-485 Mode: Default, Master, Slave (but connected via Ethernet) | ||
| * You CANNOT set when the Suprema device is connected as a slave device of the Suprema device. | * You CANNOT set when the Suprema device is connected as a slave device of the Suprema device. | ||
| - | ===== 2. Options are only applicable for Wiegand output and OSDP output. ===== | + | === 2. Options are only applicable for Wiegand output and OSDP output. === |
| * Write Smart Card and Read Card are not affected. | * Write Smart Card and Read Card are not affected. | ||
| - | ===== 3. Operation according to RS-485 Mode ===== | + | === 3. Operation according to RS-485 Mode === |
| * Default, Master, Slave (but connected via Ethernet): Operates according to the device's 'Smart Card Output Byte Order' setting. | * Default, Master, Slave (but connected via Ethernet): Operates according to the device's 'Smart Card Output Byte Order' setting. | ||
| * When connected to the Slave device of the Suprema device: The Slave transmits the Card ID to the Master device and operates according to the 'Smart Card Output Byte Order' setting in the Master device. | * When connected to the Slave device of the Suprema device: The Slave transmits the Card ID to the Master device and operates according to the 'Smart Card Output Byte Order' setting in the Master device. | ||
| - | ===== 4. Operation according to Wiegand Output ===== | + | === 4. Operation according to Wiegand Output === |
| * When Output info is Card ID: Operates according to the setting. | * When Output info is Card ID: Operates according to the setting. | ||
| * When Output info is User ID: Not influenced. | * When Output info is User ID: Not influenced. | ||
| - | ===== 5. Actions according to the card type ===== | + | === 5. Actions according to the card type === |
| * MIFARE, DESFire: Operates according to the 'Smart Card Output Byte Order' setting. | * MIFARE, DESFire: Operates according to the 'Smart Card Output Byte Order' setting. | ||
| * iClass: Not influenced. Output PAC data as it is. | * iClass: Not influenced. Output PAC data as it is. | ||
| * BioStar 2 QR: Not influenced. | * BioStar 2 QR: Not influenced. | ||