Differences

This shows you the differences between two versions of the page.

--- en:the_number_of_access_group_and_access_level [2018/12/26 15:00]
yjjung created
+++ en:the_number_of_access_group_and_access_level [2021/12/29 15:24] (current)
peterk
@@ Line 1: / Line 1: @@
 ===== The number of access group and access level =====
 ----
-Before BioStar 2.7.0, BioStar 2 is limited to 128 Access groups and Access levels.\\
+Before BioStar 2.7.0, BioStar 2 was limited to 128 Access groups and Access levels.\\
 From BioStar 2.7.0, BioStar 2 can create access groups and access levels infinitely without any restriction.\\
 {{:the_number_of_access_group_and_access_level.png?nolink&800|}}\\
-BioStar 2 allows you to create an infinite Access group, but this number is limited by the FW and the number is different by FW.
+BioStar 2 allows you to create infinite number of Access group, but this number is limited by the device FW’s and the number is different for each FW.
+**FW list which can accommodate up to 2048: ** \\
+{{en:agal.png?nolink&600|}}\\
-**FW list which can accommodate up to 2048**
-  *   BioStation 2: 1.7.0 or later
-  *   BioStation A2: 1.6.0 or later
-  *   BioStation L2: 1.4.0 or later
-  *   BioEntry W2: 1.3.0 or later
-  *   FaceStation 2: 1.2.0 or later
-  *   CoreStation: 1.2.0 or later
-  *   BioEntry P2: 1.2.0 or later
-  *   BioLite N2: 1.1.0 or later
 <callout type="info" icon="true">
- Others including Entry devices with firmware version V2.x can accommdatp to 128
+ Others including Entry devices with firmware version V2.x can accommodate up to 128 access groups
 </callout>
 <callout type="warning" icon="true">
- Sync error occurs when the number that can be accommodated in FW is exceeded.
+ Sync error occurs when the number of Access Groups for the FW exceeds its limit.
 </callout>