Differences

This shows you the differences between two versions of the page.

--- en:unlimited_floor_level_supported [2019/12/30 08:51]
jhlee2
+++ en:unlimited_floor_level_supported [2021/12/20 10:15] (current)
peterk
@@ Line 1: / Line 1: @@
 ====== Unlimited Floor Level Supported ======
-From BioStar 2 v2.7.3, unlimited floor level is supported by BioStar 2 software.
+From BioStar 2 v2.7.3, unlimited floor level is supported.
-But in current Suprema device firmware is not supported for unlimited floor level. (May, 2019)
+But in current Suprema devices, firmware is not supported for unlimited floor level. (May, 2019)
-According to the capacity difference of devices, 1st generation entry level devices has more strict limitation then 2nd generation devices.
+As the capacity of devices differ, the 1st generation entry level devices has more strict limitation than the 2nd generation devices.
-Please refer an article below and check the capacity differences.
+Please refer to the article below and check the capacity differences.
 \\
 [[https://support.supremainc.com/en/support/solutions/articles/24000041652--biostar-2-notice-for-usage-of-combined-environment-1st-generation-entry-level-devices-and-2nd-gener|[BioStar 2] Notice for Usage of Combined Environment 1st Generation Entry Level Devices and 2nd Generation Devices]]
 \\
 <callout type="warning" icon="true">
-  * If you generated more floor levels than device capability, devices would lose sync with BioStar 2 server.
+  * If you have generated more floor levels than the devices’ capability, devices would lose sync with BioStar 2 server.
   * If your device lost sync with Biostar 2 server, then the system would not operate properly.
 </callout>
@@ Line 21: / Line 21: @@
 </callout>
 \\