Communication API

As API that configures the SSL communication, there are communication interfaces include LAN, USB, and RS485. To get real-time device connectivity and search results, please register the callback function via the BS2_SetDeviceEventListener function.

• BS2_SetDeviceEventListener: Sets device search and network connection event listener.
• BS2_SearchDevices: Search for devices in subnet.
• BS2_SearchDevicesEx: Search for devices in a specific IP address band.
• BS2_GetDevices: Gets the managed device information.
• BS2_ConnectDevice: Connects the device using the device identifier.
• BS2_ConnectDeviceIPV6: Connects the device in IPv6 mode using the device identifier.
• BS2_ConnectDeviceViaIP: Connect devices using IP address and Port.
• BS2_DisconnectDevice: Disconnects from the device.
• BS2_SetKeepAliveTimeout: Sets the keep-alive timeout.
• BS2_SetNotificationListener: Sets the Notification listener.
• BS2_SetServerPort: Sets the server Port.
• BS2_SetSSLServerPort: Sets the SSL server Port.
• BS2_GetServerPort: [+ 2.6.3] Gets the server Port.
• BS2_GetSSLServerPort: [+ 2.6.3] Gets the SSL server port.
• BS2_IsConnected: Checks device connection status.
• BS2_IsAutoConnection: Checks auto connection status.
• BS2_SetAutoConnection: Sets auto connection.
• BS2_GetEnableIPV4: [+ 2.6.3] Gets IPv4 connection mode.
• BS2_SetEnableIPV4: [+ 2.6.3] Sets IPv4 connection mode.
• BS2_GetEnableIPV6: [+ 2.6.3] Gets IPv6 connection mode.
• BS2_SetEnableIPV6: [+ 2.6.3] Sets IPv6 connection mode.
• BS2_SetServerPortIPV6: [+ 2.6.3] Sets server port when connecting IPv6 server mode.
• BS2_GetServerPortIPV6: [+ 2.6.3] Gets server port when connecting IPv6 server mode.
• BS2_SetSSLServerPortIPV6: [+ 2.6.3] Sets server port when connecting IPv6 server mode using SSL.
• BS2_GetSSLServerPortIPV6: [+ 2.6.3] Gets server port when connecting IPv6 server mode using SSL.
• BS2_SetDefaultResponseTimeout: [+ 2.6.3] Sets default response timeout between device and server.
• BS2_GetDefaultResponseTimeout: [+ 2.6.3] Gets default response timeout between device and server.
• BS2_GetSocketRetryCount: [+ 2.9.1] Gets the setting value of the number of retries for read/write failures during Non SSL communication.
• BS2_SetSocketRetryCount: [+ 2.9.1] Set the number of retries for read/write failures during Non SSL communication.
• BS2_GetSocketSSLRetryCount: [+ 2.9.1] Gets the setting value of the number of retries for read/write failures during SSL communication.
• BS2_SetSocketSSLRetryCount: [+ 2.9.1] Set the number of retries for read/write failures during SSL communication.

typedef void (*OnDeviceFound)(uint32_t deviceId);
typedef void (*OnDeviceAccepted)(BS2_DEVICE_ID deviceId);
typedef void (*OnDeviceConnected)(uint32_t deviceId);
typedef void (*OnDeviceDisconnected)(uint32_t deviceId);
typedef void (*OnAlarmFired)(BS2_DEVICE_ID deviceId, const BS2Event* event);
typedef void (*OnInputDetected)(BS2_DEVICE_ID deviceId, const BS2Event* event);
typedef void (*OnConfigChanged)(BS2_DEVICE_ID deviceId, uint32_t configMask);

1. OnDeviceFound
Callback function that is called when a new BioStar device is found in Subnet.

2. OnDeviceAccepted
Callback function that is called when the BioStar device requests a connection to the BioStar application.

3. OnDeviceConnected
Callback function that is called when the device and the BioStar application are connected.

4. OnDeviceDisconnected
Callback function that is called when the connection between the device and the BioStar application is lost.

5. OnAlarmFired
Callback function that is called when an alarm set in the Zone occurs.

6. OnInputDetected
Callback function that is called when an input signal is generated.

7. OnConfigChanged
Callback function that is called when the configuration is changed by manipulating the terminal.