차이
문서의 선택한 두 판 사이의 차이를 보여줍니다.
양쪽 이전 판 이전 판 | 다음 판 양쪽 다음 판 | ||
ko:release_note_240 [2017/10/18 08:39] kyle |
ko:release_note_240 [2018/02/21 10:16] yjjung |
||
---|---|---|---|
줄 27: | 줄 27: | ||
* [[lift control api]] 가 추가되었습니다. | * [[lift control api]] 가 추가되었습니다. | ||
- | The OM-120 is a new device having capability of controlling 12 relays which can be used for lifts. There is now a new concept as floors, which will work exactly like the doors. Once a user authenticates, the floors connected to the relays of the OM-120 will be activated depending on the floor level the access group has. The floor level is the same concept of the access level and they both will be allocated to an access group.\\ | + | OM-120은 Lift에 사용할 수있는 12 개의 Relay를 제어 할 수있는 새로운 장치입니다. 이제는 door와 똑같이 작동하는 새로운 개념의 floor가 있습니다. 사용자가 인증되면 OM-120의 릴레이에 연결된 층은 Access group의 floor level에 따라 활성화됩니다. floor level은 Access level과 동일한 개념이며 둘 다 액세스 그룹에 할당됩니다.\\ |
\\ | \\ | ||
- | <text size="x-large">2.</text> The new FaceStation 2 will be released in the 2nd quarter of 2017. The v2.4 has implemented all features so the FaceStation 2 can be used right away with its release. | + | <text size="x-large">2.</text> 새로운 FaceStation 2는 2017 년 2 분기에 출시 될 예정입니다. v2.4는 FaceStation 2를 출시 이후 바로 사용될 수 있도록 모든 기능을 구현했습니7다. |
\\ | \\ | ||
- | * [[face api]] has been added | + | * [[face api]]가 추가되었습니다. |
- | The FaceStation 2 will be supporting a feature called group matching, which is a feature where you can have maximum 5000 users to be used for 1:N matching. The user can select the group that they belong to, and continue with the face matching.\\ | + | |
+ | FaceStation 2는 1:N Matching에 최대 5,000 명의 사용자를 사용할 수 있는 그룹 매칭 기능을 지원합니다. 사용자는 자신이 속한 그룹을 선택한 뒤 얼굴 매칭할 수 있습니다.\\ | ||
\\ | \\ | ||
- | <text size="x-large">3.</text> Certain devices will be compatible with the v1 Template on Cards. It was a downside of the v2 devices since there can be sites having v1 and v2 devices mixed. Now, it is possible to read the pre-issued cards from the v1 devices. | + | <text size="x-large">3.</text> 특정 장치는 카드의 v1 Template과 호환됩니다. v1 및 v2 장치가 함께 사용되는 곳에서 호환되지 않는 단점이 있었지만, 이제 v1 장치에서 미리 발급 된 카드를 읽을 수 있습니다./ |
\\ | \\ | ||
- | * Structure [[configuration api#BS1CardConfig]] has been added | + | * 구조체 [[configuration api#BS1CardConfig]]가 추가되었습니다. |
- | The v2 devices can now be set to read Template on Cards issued from a v1 device. The v2 device will need the starting block index to be the same as the CIS index block of the v1 Template on Card. To use both v1 Template on Card, v2 Access on Card/Secure Credential Card together, they will need to share the same starting block index and CIS index block.\\ | + | v1 장치에서 발행된 ToC(Template on Card)가 v2 장치에서 읽을 수 있도록 설정되었습니다. v2 장치는 시작 block index가 카드의 v1 장치의 CIS index block과 동일하게 설정되어야 합니다. v1 ToC와 v2 Access on Card/Secure Credential Card를 함께 사용하기 위해서는,동일한 시작 block index와 CIS index block를 사용해야 합니다.\\ |
\\ | \\ | ||
- | <text size="x-large">4.</text> Job code has been added to support flexibility on integrations with a T&A software. It is possible to allocate job codes to users and get the job code information from the logs. This feature is included only with the v2.4 FW group. | + | <text size="x-large">4.</text> T&A SW와의 연동성을 위해 Job Code가 추가되었습니다. Job Code를 사용자에게 할당하고 로그에서 Job Code 정보를 얻을 수 있습니다. 이 기능은 v2.4 FW 그룹에만 포함됩니다. |
+ | \\ | ||
+ | * 구조체 [[user management api#BS2UserBlobEx]]가 추가되었습니다. | ||
+ | 기존 [[user management api#BS2UserBlob]] 구조의 크기 제한으로 인해 새로운 기능 구현을 위한 새로운 구조를 만들어야했습니다. 새로운 [[user management api # BS2UserBlobEx]] 구조는 Job Code 필드를 포함하는 v2.4 FW 그룹에서만 동작합니다. 각 사용자는 각 Job Code에 대해 고유 코드 및 이름을 갖습니다. | ||
\\ | \\ | ||
- | * Structure [[user management api#BS2UserBlobEx]] has been added | ||
- | Due to the limitation on size of the existing [[user management api#BS2UserBlob]] structure, there were needs to create a new structure to implement a new feature. The new [[user management api#BS2UserBlobEx]] structure will work only with the v2.4 FW group which includes a field for the job code. Each user will have their own code and name for each job code.\\ | ||
\\ | \\ | ||
- | <text size="x-large">5.</text> A new method to retrieve logs has been added. | + | <text size="x-large">5.</text> 로그를 검색하는 새로운 방법이 추가되었습니다. |
\\ | \\ | ||
- | * API [[BS2_GetLogBlob]] has been added | + | * API [[BS2_GetLogBlob]] 가 추가되었습니다. |
- | * Structure [[log management api#BS2EventBlob]] has been added | + | * 구조체 [[log management api#BS2EventBlob]]가 추가되었습니다. |
- | The existing API [[BS2_GetLog]] was not capable to get logs including the job code. Now there is a new API where it gets the event blob. The event blob can be categorized using a mask value, which leads to be possible to get logs based on the type of the log.\\ | + | 기존 API [[BS2_GetLog]]는 Job Code를 포함한 로그를 가져올 수 없었습니다. 이제 이벤트 blob을 가져 오는 새로운 API가 있습니다. 이벤트 blob는 마스크 값을 사용하여 분류할 수 있으며 로그의 유형에 따라 로그를 가져올 수 있습니다.\\ |
\\ | \\ | ||