BS2OsdpStandardActionConfig config = { 0, };

BS2_DEVICE_ID id = Utility::selectDeviceID(deviceList, false, false);

bool activate = false;
for (int idx = 0; idx < BS2_OSDP_STANDARD_ACTION_TYPE_COUNT; idx++)
{
	string msg;
	switch (config.actions[idx].actionType)
	{
	case BS2_OSDP_STANDARD_ACTION_TYPE_SUCCESS:
		msg = "SUCCESS";
		break;
	case BS2_OSDP_STANDARD_ACTION_TYPE_FAIL:
		msg = "FAIL";
		break;
	case BS2_OSDP_STANDARD_ACTION_TYPE_WAIT_INPUT:
		msg = "WAIT_INPUT";
		break;
	case BS2_OSDP_STANDARD_ACTION_TYPE_NONE:
	default:
		msg = "NONE";
		break;
	}
	if (Utility::isYes("Do you want to modify the %s action type?", msg.c_str()))
	{
		for (int ledidx = 0; ledidx < BS2_OSDP_STANDARD_ACTION_MAX_LED; ledidx++)
		{
			string msg;
			activate = Utility::isYes("Do you want to activate for LED#%d action?", ledidx);
			config.actions[idx].led[ledidx].use = activate;

			if (activate)
			{
				msg = "  Please enter your reader number. Default(0).";
				config.actions[idx].led[ledidx].readerNumber = (uint8_t)Utility::getInput<uint32_t>(msg);
				msg = "  Please enter a led number of the reader. Default(0).";
				config.actions[idx].led[ledidx].ledNumber = (uint8_t)Utility::getInput<uint32_t>(msg);

				msg = "  Please enter a temporary command (0: NOP, 1: Cancel, 2: Set)";
				config.actions[idx].led[ledidx].tempCommand = (uint8_t)Utility::getInput<uint32_t>(msg);
				msg = "  Please enter the temporary command on time in ms.";
				config.actions[idx].led[ledidx].tempOnTime = (uint8_t)Utility::getInput<uint32_t>(msg);
				msg = "  Please enter the temporary command off time in ms.";
				config.actions[idx].led[ledidx].tempOffTime = (uint8_t)Utility::getInput<uint32_t>(msg);
				msg = "  Please enter the temporary command on color. (0: Black, 1: Red, 2: Green, 3: Amber, 4: Blue, 5: Magenta, 6: Cyan, 7: White)";
				config.actions[idx].led[ledidx].tempOnColor = (uint8_t)Utility::getInput<uint32_t>(msg);
				msg = "  Please enter the temporary command off color. (0: Black, 1: Red, 2: Green, 3: Amber, 4: Blue, 5: Magenta, 6: Cyan, 7: White)";
				config.actions[idx].led[ledidx].tempOffColor = (uint8_t)Utility::getInput<uint32_t>(msg);
				msg = "  Please enter the temporary run time in ms.";
				config.actions[idx].led[ledidx].tempRunTime = (uint16_t)Utility::getInput<uint32_t>(msg);

				msg = "  Please enter a permanent command (0: NOP, 1: Cancel, 2: Set)";
				config.actions[idx].led[ledidx].permCommand = (uint8_t)Utility::getInput<uint32_t>(msg);
				msg = "  Please enter the permanent on time in ms.";
				config.actions[idx].led[ledidx].permOnTime = (uint8_t)Utility::getInput<uint32_t>(msg);
				msg = "  Please enter the permanent off time in ms.";
				config.actions[idx].led[ledidx].permOffTime = (uint8_t)Utility::getInput<uint32_t>(msg);
				msg = "  Please enter the permanent on color. (0: Black, 1: Red, 2: Green, 3: Amber, 4: Blue, 5: Magenta, 6: Cyan, 7: White)";
				config.actions[idx].led[ledidx].permOnColor = (uint8_t)Utility::getInput<uint32_t>(msg);
				msg = "  Please enter the permanent off color. (0: Black, 1: Red, 2: Green, 3: Amber, 4: Blue, 5: Magenta, 6: Cyan, 7: White)";
				config.actions[idx].led[ledidx].permOffColor = (uint8_t)Utility::getInput<uint32_t>(msg);
			}
		}

		activate = Utility::isYes("Do you want to activate for buzzer action?");
		config.actions[idx].buzzer.use = activate;
		if (activate)
		{
			msg = "  Please enter your reader number. Default(0).";
			config.actions[idx].buzzer.readerNumber = (uint8_t)Utility::getInput<uint32_t>(msg);
			msg = "  Please enter a tone type (0: None, 1: Off, 2: On)";
			config.actions[idx].buzzer.tone = (uint8_t)Utility::getInput<uint32_t>(msg);
			msg = "  Please enter the buzzer turn-on time in ms.";
			config.actions[idx].buzzer.onTime = (uint8_t)Utility::getInput<uint32_t>(msg);
			msg = "  Please enter the buzzer turn-off time in ms.";
			config.actions[idx].buzzer.offTime = (uint8_t)Utility::getInput<uint32_t>(msg);
			msg = "  Please enter the number of cycle the buzzer on and off.";
			config.actions[idx].buzzer.numOfCycle = (uint8_t)Utility::getInput<uint32_t>(msg);
		}
	}
}

int sdkResult = BS2_SetOsdpStandardActionConfig(context_, id, &config);
if (BS_SDK_SUCCESS != sdkResult)
	printf("BS2_SetOsdpStandardActionConfig call failed: %d", sdkResult);

return sdkResult;