~~NOTOC~~
[[communication_api]] > [[BS2_SetSocketRetryCount]]

----

===== BS2_SetSocketRetryCount =====
[+ 2.9.1] During normal TCP/IP socket communication, if an error occurs while reading and writing packets from the socket in the communication section, the SDK automatically retries a certain number of times. \\
This API can change the number of retries. \\
<WRAP alert>
**CAUTION**\\
Increasing the number of retries is a good solution to resolve temporary errors, \\
but be careful as it can waste resources by retrying meaningless reads/writes when reconnecting is required due to direct causes, such as network disconnection. \\
</WRAP>
==== Declaration ====
<code cpp>
#include "BS_API.h"

int BS2_SetSocketRetryCount(void* context, uint32_t count);
</code>
==== Parameter ====
  * [In] ''//context//'' : Context
  * [In] ''//count//'' : Retry count setting value
==== Return Value ====
If successfully done, ''BS_SDK_SUCCESS'' will be returned. If there is an error, the corresponding error code will be returned.
==== See Also ====
[[BS2_GetSocketRetryCount]]