Slave Control API > BS2_SetSlaveBaudrate
[+ 2.9.8] Set the RS-485 baud rate of a slave device connected to a master device.
To reconnect with the slave, the RS-485 baud rate of the master device must also be changed to match the baud rate of the slave.
#include "BS_API.h" int BS2_SetSlaveBaudrate(IntPtr context, UInt32 deviceId, UInt32 slaveId, UInt32 baudrate);
context
: ContextdeviceId
: Device IDslaveId
: Slave device IDbaudrate
: RS-485 baud rate
If successfully done, BS_SDK_SUCCESS
will be returned.
If there is an error, the corresponding error code will be returned.