Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | Next revision Both sides next revision | ||
|
en:device_api [2023/08/16 15:51] mashin |
en:device_api [2023/08/16 15:51] mashin [BS2DeviceCapabilities] |
||
|---|---|---|---|
| Line 336: | Line 336: | ||
| Reserved space \\ \\ | Reserved space \\ \\ | ||
| - | |||
| - | ==== BS2DeviceCapabilities ==== | ||
| - | ''[+ 2.8]'' | ||
| - | <code cpp> | ||
| - | typedef struct { | ||
| - | uint32_t maxUsers; ///< 4 bytes | ||
| - | uint32_t maxEventLogs; ///< 4 bytes | ||
| - | uint32_t maxImageLogs; ///< 4 bytes | ||
| - | uint32_t maxBlacklists; ///< 4 bytes | ||
| - | uint32_t maxOperators; ///< 4 bytes | ||
| - | uint32_t maxCards; ///< 4 bytes | ||
| - | uint32_t maxFaces; ///< 4 bytes | ||
| - | uint32_t maxFingerprints; ///< 4 bytes | ||
| - | uint32_t maxUserNames; ///< 4 bytes | ||
| - | uint32_t maxUserImages; ///< 4 bytes | ||
| - | uint32_t maxUserJobs; ///< 4 bytes | ||
| - | uint32_t maxUserPhrases; ///< 4 bytes | ||
| - | uint8_t maxOutputPorts; ///< 1 byte | ||
| - | uint8_t maxRelays; ///< 1 byte | ||
| - | uint8_t maxRS485Channels; ///< 1 byte | ||
| - | |||
| - | uint8_t cameraSupported: 1; | ||
| - | uint8_t tamperSupported: 1; | ||
| - | uint8_t wlanSupported: 1; | ||
| - | uint8_t displaySupported: 1; | ||
| - | uint8_t thermalSupported: 1; | ||
| - | uint8_t maskSupported: 1; | ||
| - | uint8_t faceExSupported: 1; | ||
| - | uint8_t unused: 1; | ||
| - | |||
| - | union { | ||
| - | uint32_t mask; ///< 4 bytes | ||
| - | struct { | ||
| - | uint32_t EM: 1; | ||
| - | uint32_t HIDProx: 1; | ||
| - | uint32_t MifareFelica: 1; | ||
| - | uint32_t iClass: 1; | ||
| - | uint32_t ClassicPlus: 1; | ||
| - | uint32_t DesFireEV1: 1; | ||
| - | uint32_t SRSE: 1; | ||
| - | uint32_t SEOS: 1; | ||
| - | uint32_t NFC: 1; | ||
| - | uint32_t BLE: 1; | ||
| - | uint32_t reserved: 21; | ||
| - | uint32_t useCardOperation: 1; | ||
| - | }; | ||
| - | } cardSupported; | ||
| - | |||
| - | struct { | ||
| - | BS2_BOOL extendedMode; ///< 1 byte | ||
| - | union { | ||
| - | uint8_t mask; ///< 1 byte | ||
| - | struct { | ||
| - | uint8_t card: 1; | ||
| - | uint8_t fingerprint: 1; | ||
| - | uint8_t face: 1; | ||
| - | uint8_t id: 1; | ||
| - | uint8_t pin: 1; | ||
| - | uint8_t reserved: 3; | ||
| - | }; | ||
| - | } credentials; | ||
| - | uint8_t reserved[2]; ///< 2 bytes | ||
| - | union { | ||
| - | struct { | ||
| - | union { | ||
| - | uint8_t mask; ///< 1 byte | ||
| - | struct { | ||
| - | uint8_t biometricOnly: 1; | ||
| - | uint8_t biometricPIN: 1; | ||
| - | uint8_t unused: 6; | ||
| - | }; | ||
| - | } biometricAuth; | ||
| - | |||
| - | union { | ||
| - | uint8_t mask; ///< 1 byte | ||
| - | struct { | ||
| - | uint8_t cardOnly: 1; | ||
| - | uint8_t cardBiometric: 1; | ||
| - | uint8_t cardPIN: 1; | ||
| - | uint8_t cardBiometricOrPIN: 1; | ||
| - | uint8_t cardBiometricPIN: 1; | ||
| - | uint8_t unused: 3; | ||
| - | }; | ||
| - | } cardAuth; | ||
| - | |||
| - | union { | ||
| - | uint8_t mask; ///< 1 byte | ||
| - | struct { | ||
| - | uint8_t idBiometric: 1; | ||
| - | uint8_t idPIN: 1; | ||
| - | uint8_t idBiometricOrPIN: 1; | ||
| - | uint8_t idBiometricPIN: 1; | ||
| - | uint8_t unused: 4; | ||
| - | }; | ||
| - | } idAuth; | ||
| - | } legacy; | ||
| - | |||
| - | struct { | ||
| - | union { | ||
| - | uint32_t mask; ///< 4 bytes | ||
| - | struct { | ||
| - | uint32_t faceOnly: 1; | ||
| - | uint32_t faceFingerprint: 1; | ||
| - | uint32_t facePIN: 1; | ||
| - | uint32_t faceFingerprintOrPIN: 1; | ||
| - | uint32_t faceFingerprintPIN: 1; | ||
| - | uint32_t unused: 27; | ||
| - | }; | ||
| - | } faceAuth; | ||
| - | |||
| - | union { | ||
| - | uint32_t mask; ///< 4 bytes | ||
| - | struct { | ||
| - | uint32_t fingerprintOnly: 1; | ||
| - | uint32_t fingerprintFace: 1; | ||
| - | uint32_t fingerprintPIN: 1; | ||
| - | uint32_t fingerprintFaceOrPIN: 1; | ||
| - | uint32_t fingerprintFacePIN: 1; | ||
| - | uint32_t unused: 27; | ||
| - | }; | ||
| - | } fingerprintAuth; | ||
| - | |||
| - | union { | ||
| - | uint32_t mask; ///< 4 bytes | ||
| - | struct { | ||
| - | uint32_t cardOnly: 1; | ||
| - | uint32_t cardFace: 1; | ||
| - | uint32_t cardFingerprint: 1; | ||
| - | uint32_t cardPIN: 1; | ||
| - | uint32_t cardFaceOrFingerprint: 1; | ||
| - | uint32_t cardFaceOrPIN: 1; | ||
| - | uint32_t cardFingerprintOrPIN: 1; | ||
| - | uint32_t cardFaceOrFingerprintOrPIN: 1; | ||
| - | uint32_t cardFaceFingerprint: 1; | ||
| - | uint32_t cardFacePIN: 1; | ||
| - | uint32_t cardFingerprintFace: 1; | ||
| - | uint32_t cardFingerprintPIN: 1; | ||
| - | uint32_t cardFaceOrFingerprintPIN: 1; | ||
| - | uint32_t cardFaceFingerprintOrPIN: 1; | ||
| - | uint32_t cardFingerprintFaceOrPIN: 1; | ||
| - | uint32_t unused: 17; | ||
| - | }; | ||
| - | } cardAuth; | ||
| - | |||
| - | union { | ||
| - | uint32_t mask; ///< 4 bytes | ||
| - | struct { | ||
| - | uint32_t idFace: 1; | ||
| - | uint32_t idFingerprint: 1; | ||
| - | uint32_t idPIN: 1; | ||
| - | uint32_t idFaceOrFingerprint: 1; | ||
| - | uint32_t idFaceOrPIN: 1; | ||
| - | uint32_t idFingerprintOrPIN: 1; | ||
| - | uint32_t idFaceOrFingerprintOrPIN: 1; | ||
| - | uint32_t idFaceFingerprint: 1; | ||
| - | uint32_t idFacePIN: 1; | ||
| - | uint32_t idFingerprintFace: 1; | ||
| - | uint32_t idFingerprintPIN: 1; | ||
| - | uint32_t idFaceOrFingerprintPIN: 1; | ||
| - | uint32_t idFaceFingerprintOrPIN: 1; | ||
| - | uint32_t idFingerprintFaceOrPIN: 1; | ||
| - | uint32_t unused: 18; | ||
| - | }; | ||
| - | } idAuth; | ||
| - | } extended; | ||
| - | }; | ||
| - | } authSupported; | ||
| - | |||
| - | uint8_t intelligentPDSupported: 1; | ||
| - | uint8_t unused2: 7; | ||
| - | | ||
| - | uint8_t reserved[431]; | ||
| - | } BS2DeviceCapabilities; | ||
| - | </code> | ||
| - | 1. //maxUsers// \\ | ||
| - | Indicates the maximum number of information that can be stored on the device. (User) \\ \\ | ||
| - | 2. //maxEventLogs// \\ | ||
| - | Indicates the maximum number of information that can be stored on the device. (Event log) \\ \\ | ||
| - | 3. //maxImageLogs// \\ | ||
| - | Indicates the maximum number of information that can be stored on the device. (Image log) \\ \\ | ||
| - | 4. //maxBlacklists// \\ | ||
| - | Indicates the maximum number of information that can be stored on the device. (Blacklist) \\ \\ | ||
| - | 5. //maxOperators// \\ | ||
| - | Indicates the maximum number of information that can be stored on the device. (Operator) \\ \\ | ||
| - | 6. //maxCards// \\ | ||
| - | Indicates the maximum number of information that can be stored on the device. (Card) \\ \\ | ||
| - | 7. //maxFaces// \\ | ||
| - | Indicates the maximum number of information that can be stored on the device. (Face) \\ \\ | ||
| - | 8. //maxFingerprints// \\ | ||
| - | Indicates the maximum number of information that can be stored on the device. (Fingerprint) \\ \\ | ||
| - | 9. //maxUserNames// \\ | ||
| - | Indicates the maximum number of information that can be stored on the device. (Username) \\ \\ | ||
| - | 10. //maxUserImages// \\ | ||
| - | Indicates the maximum number of information that can be stored on the device. (user image) \\ \\ | ||
| - | 11. //maxUserJobs// \\ | ||
| - | Indicates the maximum number of information that can be stored on the device. (Job code) \\ \\ | ||
| - | 12. //maxUserPhrases// \\ | ||
| - | Indicates the maximum number of information that can be stored on the device. (User phrase) \\ \\ | ||
| - | 13. //maxCardsPerUser// \\ | ||
| - | Indicates the maximum number of information that can be stored on the device. (Card per user) \\ \\ | ||
| - | 14. //maxFacesPerUser// \\ | ||
| - | Indicates the maximum number of information that can be stored on the device. (Face per user) \\ \\ | ||
| - | 15. //maxFingerprintsPerUser// \\ | ||
| - | Indicates the maximum number of information that can be stored on the device. (Fingerprint per user) \\ \\ | ||
| - | 16. //maxInputPorts// \\ | ||
| - | Indicates the maximum number of information that can be stored on the device. (input port of device) \\ \\ | ||
| - | 17. //maxOutputPorts// \\ | ||
| - | Indicates the maximum number of information that can be stored on the device. (output port of device) \\ \\ | ||
| - | 18. //maxRelays// \\ | ||
| - | Indicates the maximum number of information that can be stored on the device. (relay on device) \\ \\ | ||
| - | 19. //maxRS485Channels// \\ | ||
| - | Indicates the maximum number of information that can be stored on the device. (RS485 channel) \\ \\ | ||
| - | 20. //System support information// \\ | ||
| - | It indicates the system information supported by the device in bit units as follows. \\ | ||
| - | ^Bit position ^Number of bit ^Member ^Description ^ | ||
| - | |0 |1 |cameraSupported |Camera Support or not | | ||
| - | |1 |1 |tamperSupported |Tamper Support or not | | ||
| - | |2 |1 |wlanSupported |WLAN Support or not | | ||
| - | |3 |1 |displaySupported |Available LCD or not | | ||
| - | |4 |1 |thermalSupported |TCM 10 (Thermal Detection) Support or not | | ||
| - | |5 |1 |maskSupported |Mask Detection Support or not | | ||
| - | |6 |1 |faceExSupported |Visual Face device such as FaceStation F2 or not | | ||
| - | |7 |1 |unused |Unassigned | | ||
| - | 21. //cardSupported// \\ | ||
| - | This indicates the card support relevant. \\ | ||
| - | Referring to mask value, you can access each item in its entirety or in bit units. \\ | ||
| - | ^Bit position ^Number of bit ^Member ^Description ^ | ||
| - | |- |Total |mask |total Information | | ||
| - | |0 |1 |EM |EM Card | | ||
| - | |1 |1 |HIDProx |HID Proximity Card | | ||
| - | |2 |1 |MifareFelica |MIFARE / FeliCa | | ||
| - | |3 |1 |iClass |iClass Card | | ||
| - | |4 |1 |ClassicPlus |Classic plus Card | | ||
| - | |5 |1 |DesFireEV1 |DESFire EV1 | | ||
| - | |6 |1 |SRSE |iClass SR, iClass SE | | ||
| - | |7 |1 |SEOS |iClass SEOS | | ||
| - | |8 |1 |NFC |NFC Card | | ||
| - | |9 |1 |BLE |BLE | | ||
| - | |10 |21 |reserved |Unassigned | | ||
| - | |31 |1 |useCardOperation |Card operation enabled or not | | ||
| - | 22. //authSupported// \\ | ||
| - | This indicates support information related to authentication. \\ \\ | ||
| - | 23. //extendedMode// \\ | ||
| - | If true, extended authentication mode is supported, refer to authSupported.extended. \\ | ||
| - | If false, non-extended authentication mode is supported, refer to authSupported.lagacy. \\ \\ | ||
| - | 24. //credentials// \\ | ||
| - | This indicates supported authentication methods. You can access each item in its entirety or in bit units as a mask value. \\ | ||
| - | ^Bit position ^Number of bit ^Member ^Description ^ | ||
| - | |- |Total |mask |Total Information | | ||
| - | |0 |1 |card |Card | | ||
| - | |1 |1 |fingerprint |Fingerprint | | ||
| - | |2 |1 |face |Face | | ||
| - | |3 |1 |id |ID | | ||
| - | |4 |1 |pin |PIN | | ||
| - | |5 |3 |reserved |Unassgined | | ||
| - | 25. //reserved// \\ | ||
| - | Reserved space.\\ \\ | ||
| - | 26. //legacy// \\ | ||
| - | Information referenced when non-extended authentication mode is supported. \\ \\ | ||
| - | 27. //biometricAuth// \\ | ||
| - | (Non-extended authentication mode) Indicates the biometric authentication combination. \\ | ||
| - | ^Bit position ^Number of bit ^Member ^Description ^ | ||
| - | |- |Total |mask |Total Information | | ||
| - | |0 |1 |biometricOnly |Biometric only | | ||
| - | |1 |1 |biometricPIN |Biometric + PIN | | ||
| - | |2 |6 |unused |Unassigned | | ||
| - | 28. //cardAuth// \\ | ||
| - | (Non-extended authentication mode) Indicates the card authentication combination. \\ | ||
| - | ^Bit position ^Number of bit ^Member ^Description ^ | ||
| - | |- |Total |mask |Total Information | | ||
| - | |0 |1 |cardOnly |Card only | | ||
| - | |1 |1 |cardBiometric |Card + Biometric | | ||
| - | |2 |1 |cardPIN |Card + PIN | | ||
| - | |3 |1 |cardBiometricOrPIN |Card + Biometric/PIN | | ||
| - | |4 |1 |cardBiometricPIN |Card + Biometric + PIN | | ||
| - | |5 |3 |unused |Unassigned | | ||
| - | 29. //idAuth// \\ | ||
| - | (Non-extended authentication mode) Indicates the ID authentication combination. \\ | ||
| - | ^Bit position ^Number of bit ^Member ^Description ^ | ||
| - | |- |Total |mask |Total Information | | ||
| - | |0 |1 |idBiometric |ID + Biometric | | ||
| - | |1 |1 |idPIN |ID + PIN | | ||
| - | |2 |1 |idBiometricOrPIN |ID + Biometric/PIN | | ||
| - | |3 |1 |idBiometricPIN |ID + Biometric + PIN | | ||
| - | |4 |4 |unused |미할당 필드. | | ||
| - | 30. //extended// \\ | ||
| - | This information is referenced when supporting extended authentication mode. \\ \\ | ||
| - | 31. //faceAuth// \\ | ||
| - | (Extended authentication mode) Indicates the face authentication combination. \\ | ||
| - | ^Bit position ^Number of bit ^Member ^Description ^ | ||
| - | |- |Total |mask |Total Information | | ||
| - | |0 |1 |faceOnly |Face only | | ||
| - | |1 |1 |faceFingerprint |Face + Fingerprint | | ||
| - | |2 |1 |facePIN |Face + PIN | | ||
| - | |3 |1 |faceFingerprintOrPIN |Face + Fingerprint/PIN | | ||
| - | |4 |1 |faceFingerprintPIN |Face + Fingerprint + PIN | | ||
| - | |5 |27 |unused |Unassigned | | ||
| - | 32. //fingerprintAuth// \\ | ||
| - | (Extended authentication mode) Indicates a combination of fingerprint authentication. \\ | ||
| - | ^Bit position ^Number of bit ^Member ^Description ^ | ||
| - | |- |Total |mask |Total Information | | ||
| - | |0 |1 |fingerprintOnly |Fingerprint only | | ||
| - | |1 |1 |fingerprintFace |Fingerprint + Face | | ||
| - | |2 |1 |fingerprintPIN |Fingerprint + PIN | | ||
| - | |3 |1 |fingerprintFaceOrPIN |Fingerprint + Face/PIN | | ||
| - | |4 |1 |fingerprintFacePIN |Fingerprint + Face + PIN | | ||
| - | |5 |27 |unused |Unassigned | | ||
| - | 33. //cardAuth// \\ | ||
| - | (Extended authentication mode) Indicates the card authentication combination. \\ | ||
| - | ^Bit position ^Number of bit ^Member ^Description ^ | ||
| - | |- |Total |mask |Total Information | | ||
| - | |0 |1 |cardOnly |Card only | | ||
| - | |1 |1 |cardFace |Card + Face | | ||
| - | |2 |1 |cardFingerprint |Card + Fingerprint | | ||
| - | |3 |1 |cardPIN |Card + PIN | | ||
| - | |4 |1 |cardFaceOrFingerprint |Card + Face/Fingerprint | | ||
| - | |5 |1 |cardFaceOrPIN |Card + Face/PIN | | ||
| - | |6 |1 |cardFingerprintOrPIN |Card + Fingerprint/PIN | | ||
| - | |7 |1 |cardFaceOrFingerprintOrPIN |Card + Face/Fingerprint/PIN | | ||
| - | |8 |1 |cardFaceFingerprint |Card + Face + Fingerprint | | ||
| - | |9 |1 |cardFacePIN |Card + Face + PIN | | ||
| - | |10 |1 |cardFingerprintFace |Card + Fingerprint + Face | | ||
| - | |11 |1 |cardFingerprintPIN |Card + Fingerprint + PIN | | ||
| - | |12 |1 |cardFaceOrFingerprintPIN |Card + Face/Fingerprint + PIN | | ||
| - | |13 |1 |cardFaceFingerprintOrPIN |Card + Face + Fingerprint/PIN | | ||
| - | |14 |1 |cardFingerprintFaceOrPIN |Card + Fingerprint + Face/PIN | | ||
| - | |15 |17 |unused |Unassigned | | ||
| - | 34. //idAuth// \\ | ||
| - | (Extended authentication mode) Indicates the ID authentication combination. \\ | ||
| - | ^Bit position ^Number of bit ^Member ^Description ^ | ||
| - | |- |Total |mask |Total Information | | ||
| - | |1 |1 |idFace |ID + Face | | ||
| - | |2 |1 |idFingerprint |ID + Fingerprint | | ||
| - | |3 |1 |idPIN |ID + PIN | | ||
| - | |4 |1 |idFaceOrFingerprint |ID + Face/Fingerprint | | ||
| - | |5 |1 |idFaceOrPIN |ID + Face/PIN | | ||
| - | |6 |1 |idFingerprintOrPIN |ID + Fingerprint/PIN | | ||
| - | |7 |1 |idFaceOrFingerprintOrPIN |ID + Face/Fingerprint/PIN | | ||
| - | |8 |1 |idFaceFingerprint |ID + Face + Fingerprint | | ||
| - | |9 |1 |idFacePIN |ID + Face + PIN | | ||
| - | |10 |1 |idFingerprintFace |ID + Fingerprint + Face | | ||
| - | |11 |1 |idFingerprintPIN |ID + Fingerprint + PIN | | ||
| - | |12 |1 |idFaceOrFingerprintPIN |ID + Face/Fingerprint + PIN | | ||
| - | |13 |1 |idFaceFingerprintOrPIN |ID + Face + Fingerprint/PIN | | ||
| - | |14 |1 |idFingerprintFaceOrPIN |ID + Fingerprint + Face/PIN | | ||
| - | |15 |18 |unused |Unassigned | | ||
| - | 35. //System support information// \\ | ||
| - | It indicates the system information supported by the device in bit units as follows. \\ | ||
| - | ^Bit position ^Number of bit ^Member ^Description ^ | ||
| - | |0 |1 |intelligentPDSupported |Whether Intelligent PD is supported.([[configuration api#BS2Rs485Config|BS2Rs485Config]]) | | ||
| - | |1 |1 |updateUserSupported |Whether User information update is supported. | | ||
| - | |2 |1 |simulatedUnlockSupported |Whether simulated button unlock is supported. | | ||
| - | |3 |1 |smartCardByteOrderSupported |Whether smartCardByteOrder is supported ([[configuration api#BS2CardConfig|BS2CardConfig]]) | | ||
| - | |4 |1 |treatAsCSNSupported |Whether treatAsCSN is supported. ([[configuration api#BS2BarcodeConfig|BS2BarcodeConfig]]) | | ||
| - | |5 |1 |rtspSupported |Whether RTSP is supported. ([[configuration api#BS2RtspConfig|BS2RtspConfig]]) | | ||
| - | |6 |1 |lfdSupported |Whether LFD is supported. | | ||
| - | |7 |1 |visualQRSupported |Whether Visual QR is supported. | | ||
| - | |||
| - | 36. //maxVoipExtensionNumbers// \\ | ||
| - | It is the number of registered internal numbers in the extension phone book at the extended VoIP setting information.\\ \\ | ||
| - | 37. //reserved// \\ | ||
| - | Reserved space.\\ \\ | ||