Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
en:log_management_api [2020/02/18 11:03]
yjjung [Log Management API]
en:log_management_api [2024/02/22 10:34]
kkshin
Line 5: Line 5:
  
   * [[BS2_GetLog]]:​ Gets certain amount of logs.   * [[BS2_GetLog]]:​ Gets certain amount of logs.
-  * [[BS2_GetFilteredLog]]:​ Gets filtered logs.+  * [[BS2_GetFilteredLog]]: ​''​[Deprecated]'' ​Gets filtered logs.
   * [[BS2_ClearLog]]:​ Deletes all logs.   * [[BS2_ClearLog]]:​ Deletes all logs.
   * [[BS2_StartMonitoringLog]]:​ Starts Real-time log streaming. ​   * [[BS2_StartMonitoringLog]]:​ Starts Real-time log streaming. ​
 +  * [[BS2_StartMonitoringLogEx]]:​ [+ V2.7.1] Starts Real-time log streaming including the temperature information.
   * [[BS2_StopMonitoringLog]]:​ Stops Real-time log streaming. ​   * [[BS2_StopMonitoringLog]]:​ Stops Real-time log streaming. ​
   * [[BS2_GetLogBlob]]:​ Gets certain amount of logs based on the event mask.   * [[BS2_GetLogBlob]]:​ Gets certain amount of logs based on the event mask.
-  * [[BS2_GetFilteredLogSinceEventId]]:​​ Gets filtered logs.+  * [[BS2_GetFilteredLogSinceEventId]]: ​''​[Deprecated]'' ​Gets filtered logs.
   * [[BS2_GetImageLog]] : Gets image logs using event ID.   * [[BS2_GetImageLog]] : Gets image logs using event ID.
   * [[BS2_GetLogSmallBlob]]:​ [+ 2.6.4] Gets certain amount of logs based on the event mask in an efficient way.    * [[BS2_GetLogSmallBlob]]:​ [+ 2.6.4] Gets certain amount of logs based on the event mask in an efficient way. 
 +  * [[BS2_GetLogSmallBlobEx]]:​ [+ 2.7.1] Gets certain amount of logs based on the event mask in an efficient way, including the temperature information.
 ===== Callback Function ===== ===== Callback Function =====
 +==== OnLogReceived ====
 +Callback function that is called when receiving a new log from the device. \\ \\ 
 <code cpp> <code cpp>
 typedef void (*OnLogReceived)(uint32_t deviceId, BS2Event* log); typedef void (*OnLogReceived)(uint32_t deviceId, BS2Event* log);
 </​code>​ </​code>​
 \\ \\
 +1. //​deviceId//​ \\ 
 +Device ID  \\ \\ 
 +2. //log// \\ 
 +New log information structure ​ \\ \\ 
  
-**1. //OnLogReceived//** \\  +==== OnLogReceivedEx ==== 
-Callback function that is called when a new log is received. \\ \\ +[+ V2.7.1] Callback function that is called when receiving a new log from the device. \\ 
 +The temperature information is transferred as the 3rd parameter, and auditTemperature should be true in [[configuration api#​BS2FaceConfigExt]]. \\ \\ 
 +<code cpp> 
 +typedef void (*OnLogReceivedEx)(uint32_t deviceId, BS2Eventlog, uint32_t temperature);​ 
 +</​code>​ 
 +\\ 
 +1. //deviceId// \\  
 +Device ID  \\ \\  
 +2. //log// \\  
 +New log information structure ​  \\ \\  
 +3//​temperature//​ \\  
 +Temperature information ​\\ \\
  
  
Line 55: Line 74:
             uint8_t reserved[12];​             uint8_t reserved[12];​
         } interlock;         } interlock;
 +        struct {
 +            uint16_t relayPort;
 +            uint16_t inputPort;
 +            uint8_t reserved[28];​
 +        } relayAction;​
 +        struct {
 +            BS2_DEVICE_ID deviceId;
 +            uint8_t data[28];
 +        } osdpStandard;​
     };     };
     union {     union {
Line 67: Line 95:
     BS2_BOOL image; ​        // Deprecated in V2.6.0     BS2_BOOL image; ​        // Deprecated in V2.6.0
 #else #else
-    uint8_t image: 1;       // ​Support ​image and DST by bit division+    uint8_t image: 1;       // ​Supports ​image and DST by splitting ​bit unit
     uint8_t isDST: 1;     uint8_t isDST: 1;
     uint8_t half: 1;     uint8_t half: 1;
Line 114: Line 142:
 **15. //​interlock.doorID//​** \\  **15. //​interlock.doorID//​** \\ 
 Door ID that makes interlock zone alarms. \\ \\ Door ID that makes interlock zone alarms. \\ \\
-**16. //​subCode//​** \\ +**16. //​​relayAction.relayPort//​** \\  
 +Relay port identifier when IM-120 RelayAction takes place. \\ \\ 
 +**17. //​​relayAction.inputPort//​​** \\  
 +Relay port identifier when IM-120 RelayAction takes place. \\ \\ 
 +**18. //​osdpStandard.deviceId//​** \\  
 +Identifier of the OSDP standard device. \\ \\  
 +**19. //​osdpStandard.data//​** \\  
 +This is notification structure information with a total size of 28 bytes generated from OSDP standard devices. \\ 
 +For detailed information about the structure, please refer to [[slave_control_api#​BS2OsdpStandardDeviceNotify|BS2OsdpStandardDeviceNotify]]. \\ \\ 
 +**20. //​subCode//​** \\
 Sub code value of log types. Use if the additional information is necessary. \\ Sub code value of log types. Use if the additional information is necessary. \\
-^Category ^Event code  ^Value ​ ^Description ​ ^+^Category ^Event code ^Value ^Description ​ ^
 |Verify ​ |BS2_SUB_EVENT_VERIFY_ID_PIN ​ |0x01  |ID and PIN verification success ​ | |Verify ​ |BS2_SUB_EVENT_VERIFY_ID_PIN ​ |0x01  |ID and PIN verification success ​ |
 |::: |BS2_SUB_EVENT_VERIFY_ID_FINGER ​ |0x02  |ID and fingerprint verification success ​ | |::: |BS2_SUB_EVENT_VERIFY_ID_FINGER ​ |0x02  |ID and fingerprint verification success ​ |
Line 132: Line 169:
 |::: |BS2_SUB_EVENT_VERIFY_AOC_FINGER ​ |0x0E  |AOC card and fingerprint verification success ​ | |::: |BS2_SUB_EVENT_VERIFY_AOC_FINGER ​ |0x0E  |AOC card and fingerprint verification success ​ |
 |::: |BS2_SUB_EVENT_VERIFY_AOC_FINGER_PIN ​ |0x0F  |AOC card, fingerprint,​ PIN verification success ​ | |::: |BS2_SUB_EVENT_VERIFY_AOC_FINGER_PIN ​ |0x0F  |AOC card, fingerprint,​ PIN verification success ​ |
 +|::: |BS2_SUB_EVENT_VERIFY_MOBLIE_CARD ​ |0x16  |Mobile card verification success (+V2.8) ​ |
 +|::: |BS2_SUB_EVENT_VERIFY_MOBILE_CARD_PIN ​ |0x17  |Mobile card and PIN verification success (+V2.8) ​ |
 +|::: |BS2_SUB_EVENT_VERIFY_MOBILE_CARD_FINGER ​ |0x18  |Mobile card and fingerprint verification success (+V2.8) ​ |
 +|::: |BS2_SUB_EVENT_VERIFY_MOBILE_CARD_FINGER_PIN ​  ​|0x19 ​ |Mobile card, fingerprint,​ PIN verification success (+V2.8) ​ |
 +|::: |BS2_SUB_EVENT_VERIFY_MOBILE_CARD_FACE ​ |0x1A  |Mobile card and face verification success (+V2.8) ​ |
 +|::: |BS2_SUB_EVENT_VERIFY_MOBILE_CARD_FACE_PIN ​ |0x1B  |Mobile card, face, PIN verification success (+V2.8) ​ |
 +|::: |BS2_SUB_EVENT_VERIFY_MOBILE_CARD_FACE_FINGER ​ |0x20  |Mobile card, face, fingerprint verification success (+V2.8) ​ |
 +|::: |BS2_SUB_EVENT_VERIFY_MOBILE_CARD_FINGER_FACE ​ |0x21  |Mobile card, fingerprint,​ face verification success (+V2.8) ​ |
 |Identify ​ |BS2_SUB_EVENT_IDENTIFY_FINGER ​ |0x01  |Fingerprint identification success ​ | |Identify ​ |BS2_SUB_EVENT_IDENTIFY_FINGER ​ |0x01  |Fingerprint identification success ​ |
 |::: |BS2_SUB_EVENT_IDENTIFY_FINGER_PIN ​ |0x02  |Fingerprint and PIN identification success ​ | |::: |BS2_SUB_EVENT_IDENTIFY_FINGER_PIN ​ |0x02  |Fingerprint and PIN identification success ​ |
Line 145: Line 190:
 |::: |BS2_SUB_EVENT_CREDENTIAL_AOC_PIN ​ |0x06  |Invalid AOC PIN  | |::: |BS2_SUB_EVENT_CREDENTIAL_AOC_PIN ​ |0x06  |Invalid AOC PIN  |
 |::: |BS2_SUB_EVENT_CREDENTIAL_AOC_FINGER ​ |0x07  |Invalid AOC fingerprint ​ | |::: |BS2_SUB_EVENT_CREDENTIAL_AOC_FINGER ​ |0x07  |Invalid AOC fingerprint ​ |
 +|::: |BS2_SUB_EVENT_CREDENTIAL_MOBILE_CARD ​ |0x08  |Invalid mobile card (+V2.8) ​ |
 |Auth  |BS2_SUB_EVENT_AUTH_FAIL_INVALID_AUTH_MODE ​ |0x01  |Invalid authentication mode  | |Auth  |BS2_SUB_EVENT_AUTH_FAIL_INVALID_AUTH_MODE ​ |0x01  |Invalid authentication mode  |
 |::: |BS2_SUB_EVENT_AUTH_FAIL_INVALID_CREDENTIAL ​ |0x02  |Non-registered authentication method| |::: |BS2_SUB_EVENT_AUTH_FAIL_INVALID_CREDENTIAL ​ |0x02  |Non-registered authentication method|
Line 157: Line 203:
 |APB  |BS2_SUB_EVENT_ZONE_HARD_APB ​ |0x01  |Hard APB zone  | |APB  |BS2_SUB_EVENT_ZONE_HARD_APB ​ |0x01  |Hard APB zone  |
 |::: |BS2_SUB_EVENT_ZONE_SOFT_APB ​ |0x02  |Soft APB zone  | |::: |BS2_SUB_EVENT_ZONE_SOFT_APB ​ |0x02  |Soft APB zone  |
- +**21. //​mainCode//​** \\ 
-**17. //​mainCode//​** \\ +
 Main code value of log types. \\ Main code value of log types. \\
 ^Category ​ ^Event code  ^Value ​ ^Description ​ ^ ^Category ​ ^Event code  ^Value ​ ^Description ​ ^
Line 240: Line 285:
 |:::  |BS2_EVENT_ZONE_SCHEDULED_LOCK_ALARM ​ |0x6E00 ​ |Scheduled lock alarm zone start  | |:::  |BS2_EVENT_ZONE_SCHEDULED_LOCK_ALARM ​ |0x6E00 ​ |Scheduled lock alarm zone start  |
 |:::  |BS2_EVENT_ZONE_SCHEDULED_LOCK_ALARM_CLEAR ​ |0x6F00 ​ |Scheduled lock alarm zone clear  | |:::  |BS2_EVENT_ZONE_SCHEDULED_LOCK_ALARM_CLEAR ​ |0x6F00 ​ |Scheduled lock alarm zone clear  |
 +|
 +|RelayAction ​ |BS2_EVENT_RELAY_ACTION_ON ​ |0xC300 ​ |RelayAction Switch-ON ​ |
 +|:::  |BS2_EVENT_RELAY_ACTION_OFF ​ |0xC400 ​ |RelayAction Switch-OFF ​ |
 +|:::  |BS2_EVENT_RELAY_ACTION_KEEP ​ |0xC500 ​ |RelayAction KEEP SIGNAL ​ |
  
-**18. //param//** \\ + 
 +**22.//​param//​** \\ 
 It is used only when extra information on the device is needed. Usually, a time and attendance code, a port number of the door or input device is stored in the //param// argument. It is used only when extra information on the device is needed. Usually, a time and attendance code, a port number of the door or input device is stored in the //param// argument.
 When a time and attendance code is stored, refer to the following values: When a time and attendance code is stored, refer to the following values:
Line 283: Line 333:
 \\ \\  \\ \\ 
  
-**19. //image//** \\ +**23. //image//** \\ 
 Prior to SDK V2.6.0, it used the whole 1 byte and means below: \\ Prior to SDK V2.6.0, it used the whole 1 byte and means below: \\
 - Whether the image was included when the event occurred (true / false). \\ \\ - Whether the image was included when the event occurred (true / false). \\ \\
Line 326: Line 376:
 <WRAP group 50%> <WRAP group 50%>
 ^Value ​ ^Description ​ ^ ^Value ​ ^Description ​ ^
-|0     ​|None  +|0x0000 ​ |None| 
-|1     |BS2EventExtInfo ​structure ​+|0x0001  ​|BS2EventExtInfo ​Structure
-|2     |User ID | +|0x0002  ​|User ID | 
-|4     |Card ID | +|0x0004  ​|Card ID | 
-|8     |Door ID | +|0x0008  ​|Door ID | 
-|16    ​|Zone ID | +|0x0010  ​|Zone ID | 
-|32    ​|BS2EventExtIoDevice ​structure  ​+|0x0020  ​|BS2EventExtIoDevice ​Structure
-|64    |Door ID | +|0x0040  ​|TNA Key | 
-|128   |Zone ID | +|0x0080  ​|Job Code | 
-|256   |TNA Key | +|0x0100 ​ ​|Image | 
-|512   |Job Code | +|0x0200 ​ |Temperature | 
-|1024  ​|Image | +|0xFFFF  ​|ALL |
-|65535 |ALL |+
 </​WRAP>​ </​WRAP>​
 2. //id// \\  2. //id// \\ 
Line 347: Line 396:
 User ID related to log. When the value is 0, the log is not relevant to user. \\ \\  User ID related to log. When the value is 0, the log is not relevant to user. \\ \\ 
 5. //cardID// \\  5. //cardID// \\ 
-Card ID related to log. When the value is 0, the log is not relevant to card.  \\ \\ +Card ID related to log. When the value is 0, the log is not relevant to card.  ​\\  
 +The device records card ID only for failure auth, it returns user ID when successful auth regardless of eventMask value. ​\\ \\
 6. //doorID// \\  6. //doorID// \\ 
 Door ID related to log. When the value is 0, the log is not relevant to door.  \\ \\  Door ID related to log. When the value is 0, the log is not relevant to door.  \\ \\ 
Line 421: Line 471:
 4. //​reserved//​ \\  4. //​reserved//​ \\ 
 Reserved space.\\ \\ Reserved space.\\ \\
 +
 +==== BS2EventSmallBlob ====
 +<code cpp>
 +typedef struct {
 +    uint16_t eventMask;
 +    uint32_t id;
 +    BS2EventExtInfo info; 
 +    union
 +    {
 + BS2_USER_ID userID; ​                      // valid if eventMask has BS2_EVENT_MASK_USER_ID
 + uint8_t cardID[BS2_CARD_DATA_SIZE]; ​      // valid if eventMask has BS2_EVENT_MASK_CARD_ID
 + BS2_DOOR_ID doorID; ​                      // valid if eventMask has BS2_EVENT_MASK_DOOR_ID
 + BS2_ZONE_ID zoneID; ​                      // valid if eventMask has BS2_EVENT_MASK_ZONE_ID
 + BS2EventExtIoDevice ioDevice; ​            // valid if eventMask has BS2_EVENT_MASK_IODEVICE
 +    };
 +    uint8_t tnaKey;
 +    uint32_t jobCode; ​   ​
 +    uint16_t imageSize;
 +    uint8_t* imageObj; ​                       // valid if eventMask has BS2_EVENT_MASK_IMAGE
 +    uint8_t reserved;
 +} BS2EventSmallBlob;​
 +</​code>​
 +\\
 +
 +1. //​eventMask//​ \\ 
 +Event mask value. Logs will be retrieved based on the mask value such as user, card, door, or zone.\\ \\ 
 +<WRAP group 50%>
 +^Value ​ ^Description ​ ^
 +|0x0000 ​ |None|
 +|0x0001 ​ |BS2EventExtInfo Structure|
 +|0x0002 ​ |User ID |
 +|0x0004 ​ |Card ID |
 +|0x0008 ​ |Door ID |
 +|0x0010 ​ |Zone ID |
 +|0x0020 ​ |BS2EventExtIoDevice Structure|
 +|0x0040 ​ |TNA Key |
 +|0x0080 ​ |Job Code |
 +|0x0100 ​ |Image |
 +|0x0200 ​ |Temperature |
 +|0xFFFF ​ |ALL |
 +</​WRAP>​
 +2. //id// \\ 
 +Log record ID which automatically increases from 1 when the log is generated. \\ \\ 
 +3. //info// \\ 
 +BS2EventExtInfo structure information. \\ \\ 
 +4. //userID// \\ 
 +User ID related to log. When the value is 0, the log is not relevant to user. \\ \\ 
 +5. //cardID// \\ 
 +Card ID related to log. When the value is 0, the log is not relevant to card.  \\ 
 +The device records card ID only for failure auth, it returns user ID when successful auth regardless of eventMask value. \\ \\
 +6. //doorID// \\ 
 +Door ID related to log. When the value is 0, the log is not relevant to door.  \\ \\ 
 +7. //zoneID// \\ 
 +Zone ID related to log. When the value is 0, the log is not relevant to zone.  \\ \\ 
 +8. //​ioDevice//​ \\ 
 +Door or input device ID related to log. When the value is 0, the log is not relevant to door or input. Refer to BS2EventExtIoDevice structure.\\ \\ 
 +9. //tnaKey// \\ 
 +The T&A key that has been used for the authentication. When the value is 0, the log is not relevant to T&A key. \\ \\
 +10. //jobCode// \\ 
 +The job code that has been used for the authentication. When the value is 0, the log is not relevant to job code. \\ \\
 +11. //​imageSize//​ \\ 
 +Size of the image when there is an image log. \\ \\
 +12. //​imageObj//​ \\ 
 +Data of the image. \\ \\
 +13. //​reserved//​ \\ 
 +Reserved space.\\ \\
 +
 +
 +
 +==== BS2EventSmallBlobEx ====
 +<code cpp>
 +typedef struct {
 +    uint16_t eventMask;
 +    uint32_t id;
 +    BS2EventExtInfo info;                         // valid if eventMask has BS2_EVENT_MASK_INFO
 +    union
 +    {
 +        BS2_USER_ID userID; ​                      // valid if eventMask has BS2_EVENT_MASK_USER_ID
 +        uint8_t cardID[BS2_CARD_DATA_SIZE]; ​      // valid if eventMask has BS2_EVENT_MASK_CARD_ID
 +        BS2_DOOR_ID doorID; ​                      // valid if eventMask has BS2_EVENT_MASK_DOOR_ID
 +        BS2_ZONE_ID zoneID; ​                      // valid if eventMask has BS2_EVENT_MASK_ZONE_ID
 +        BS2EventExtIoDevice ioDevice; ​            // valid if eventMask has BS2_EVENT_MASK_IODEVICE
 +    };
 +    uint8_t tnaKey; ​                              // valid if eventMask has BS2_EVENT_MASK_TNA_KEY
 +    uint32_t jobCode; ​                            // valid if eventMask has BS2_EVENT_MASK_JOB_CODE
 +    uint16_t imageSize; ​                          // valid if eventMask has BS2_EVENT_MASK_IMAGE
 +    uint8_t* imageObj; ​                           // valid if eventMask has BS2_EVENT_MASK_IMAGE
 +    uint8_t reserved;
 +    uint32_t temperature; ​                        // valid if eventMask has BS2_EVENT_MASK_TEMPERATURE
 +} BS2EventSmallBlobEx;​
 +</​code>​
 +\\
 +
 +1. //​eventMask//​ \\ 
 +Event mask value. Logs will be retrieved based on the mask value such as user, card, door, or zone.\\ \\ 
 +<WRAP group 50%>
 +^Value ​ ^Description ​ ^
 +|0x0000 ​ |None|
 +|0x0001 ​ |BS2EventExtInfo Structure|
 +|0x0002 ​ |User ID |
 +|0x0004 ​ |Card ID |
 +|0x0008 ​ |Door ID |
 +|0x0010 ​ |Zone ID |
 +|0x0020 ​ |BS2EventExtIoDevice Structure|
 +|0x0040 ​ |TNA Key |
 +|0x0080 ​ |Job Code |
 +|0x0100 ​ |Image |
 +|0x0200 ​ |Temperature |
 +|0xFFFF ​ |ALL |
 +</​WRAP>​
 +2. //id// \\ 
 +Log record ID which automatically increases from 1 when the log is generated. \\ \\
 +3. //info// \\ 
 +BS2EventExtInfo structure information. \\ \\
 +4. //userID// \\ 
 +User ID related to log. When the value is 0, the log is not relevant to user. \\ \\ 
 +5. //cardID// \\ 
 +Card ID related to log. When the value is 0, the log is not relevant to card.  \\ 
 +The device records card ID only for failure auth, it returns user ID when successful auth regardless of eventMask value. \\ \\
 +6. //doorID// \\ 
 +Door ID related to log. When the value is 0, the log is not relevant to door.  \\ \\ 
 +7. //zoneID// \\ 
 +Zone ID related to log. When the value is 0, the log is not relevant to zone.  \\ \\ 
 +8. //​ioDevice//​ \\ 
 +Door or input device ID related to log. When the value is 0, the log is not relevant to door or input. Refer to BS2EventExtIoDevice structure.\\ \\ 
 +9. //tnaKey// \\ 
 +The T&A key that has been used for the authentication. When the value is 0, the log is not relevant to T&A key. \\ \\
 +10. //jobCode// \\ 
 +The job code that has been used for the authentication. When the value is 0, the log is not relevant to job code. \\ \\
 +11. //​imageSize//​ \\ 
 +Size of the image when there is an image log. \\ \\
 +12. //image// \\ 
 +Data of the image. \\ \\
 +13. //​temperature//​ \\ 
 +Temperature information is set when there'​s a thermal camera installed and setting to record event logs. [[configuration api#​BS2FaceConfigExt|Refer to auditTemperature]] \\ \\
 +14. //​reserved//​ \\ 
 +Reserved. \\ \\