2026-01-30

• Supported XPass Q2 (XPQ2-DB, XPQ2-APB)
• Supported BioStation 3 Max (BS3M-DB, BS3M-APB, BS3M-ODB, BS3M-OAPB)
• Added Master Admin configuration feature
• Added Lock Override feature
• Added Door Mode Override feature
• Added User Override feature
• Added configuration for response timeout of long-processing functions

1. Supports new devices.

• XPass Q2 (XPQ2-DB, XPQ2-APB)
• BioStation 3 Max (BS3M-DB, BS3M-APB, BS3M-ODB, BS3M-OAPB)

2. Added a feature to configure the Master Admin on the device.
Please refer to the linked API descriptions below for supported devices and firmware versions.

• Add API BS2_GetMasterAdmin
• Add API BS2_SetMasterAdmin
• Refer to structure BS2SystemConfig
• Refer to structure BS2DeviceCapabilities

3. Added Lock Override feature for emergency door opening.
Cards enrolled via Lock Override can bypass the door lock status and open the door.

• Add API BS2_GetLockOverride
• Add API BS2_GetAllLockOverride
• Add API BS2_SetLockOverride
• Add API BS2_RemoveLockOverride
• Add API BS2_RemoveAllLockOverride
• Add structure BS2LockOverride
• Refer to structure BS2DeviceCapabilities

4. Added Timed Door Lock/Unlock (Door Mode Override) feature.

• Add API BS2_TimedLockDoor
• Add API BS2_TimedUnlockDoor
• Refer to structure BS2DeviceCapabilities

5. Added Extended Door Open Time (User Override) feature.

• Add API BS2_GetUserOverride
• Add API BS2_GetAllUserOverride
• Add API BS2_SetUserOverride
• Add API BS2_RemoveUserOverride
• Add API BS2_RemoveAllUserOverride
• Refer to structure BS2Door
• Add structure BS2UserOverride

6. Added a feature to retrieve the current I/O port status of the device.

• Add API BS2_GetDeviceIOStatus
• Add API BS2_GetAllDeviceIOStatus
• Add structure BS2IOStatus
• Refer to structure BS2DeviceCapabilities

7. Allows manual configuration of the response timeout for some APIs that require a long processing time.

• Add API BS2_SetDefaultLongResponseTimeout
• Add API BS2_GetDefaultLongResponseTimeout

1. Restricted controlling slave devices using the BS2_RunAction API.
However, it works normally for slave panels such as DI-24.

2. Fixed an issue where a crash could occur in the SDK internal timer manager module (Specific to v2.9.6.1).

3. Improved internal logic for SDK code stability.