2024-11-07

1. Supports the RTSP Video Resolution feature of selecting the resolution of the video output from the device when using RTSP.

2. Supports FeliCa card from Custom Smart Card Layout.

3. Supports the Auth Result Display Option that allows you to select how the user ID and name are displayed on the authentication result screen of the device.

• User ID Display
• User Name Display

4. Supports mobile application Device Manager, which allows setting up devices by connecting via BLE.

• Device Manager v1.2.0 or later

5. Improved face anti-spoofing performance.

6. Supports the Require No Mask option that allows rejecting authentication for users wearing a mask during face authentication.

1. When the Reset Time for Timed Anti PassBack is set to 0, anti-passback does not work. (Affects version: v1.0.0)

2. Device does not recognize certain RF cards. (Affects version: v1.0.0)

3. When the device's Device → Server setting gets inactive while the device is on the Waiting Device list of BioStar 2, the device still appears in the Waiting Device list, and the BioStar 2 connect icon is displayed at the top of the device. (Affects version: v1.0.0)

4. The device freezes when the RS-485 mode on the device is set to Not Use using the SDK. (Affects version: v1.0.0)

5. When the device is connected as a slave and the Auth Timeout is set to 20 seconds, an authentication error occurs if the card is repeatedly authenticated while waiting for facial authentication after card authentication. (Affects version: v1.0.0)

6. Some smart cards fail to be recognized in environments using the new SE chip firmware. (Affects version: v1.0.0)