Differences

This shows you the differences between two versions of the page.

--- en:how_to_configure_a_custom_level [2018/01/03 13:10]
ethan title (and above) 추가
+++ en:how_to_configure_a_custom_level [2018/10/24 11:39]
conan
@@ Line 2: / Line 2: @@
 ====== How to Configure a Custom Level ======
-===== Before versions before 2.3 =====
+The custom level feature allows you to give specified privileges to administrators in specific menus.
-Before the release of BioStar 2.3, there were only 4 operator levels for users. There functions were limited to their roles as shown below: \\
-  - 	Administrator : full privileges over all operations
+===== BioStar version 2.6 and above =====
-  - 	User Operator : only full privileges to edit users
+From BioStar 2.6.3, the Admin Item Setting is changed so that a custom level can be assigned for a specific User Group, Device Group, Door Group, and Access Group. Also Monitoring menu is now allowing the administrator to assign "Read" rights. \\
-  - 	Monitoring Operator : only full privileges over the monitoring page
-  - 	Mobile User : only privilege to read all menus.
+. Go to the **Settings** > **ACCOUNT**. \\
+{{:en:biostar2_custom_level_1.png?nolink&800|}} \\
+. Create new Custom Level. At this point, you can configure the item settings and menu settings. \\
+{{:en:custom_level_-_2.6.3.png?nolink&1000|}} \\
+You can also see now that the Monitoring Admin Menu Setting allows "Read" assignment.\\
+**Admin Item Settings** includes User Group, Device Group, Door Group, and Access Group(including Elevator Group). \\
+Each item can be configured for each group or for all groups. \\
+**Admin Menu Settings** consists of Dashboard, User, Device, Door, Elevator, Zone, Access Control, Monitoring, Time and Attendance, Setting, and Video categories. \\
+For each menu you can set "Edit" and "Read" privileges. \\
+When checking "Edit" it will automatically check "Read." \\
+Depending on such privilege settings, "Add Button" column value will be changed (N/A, Disabled, or Enabled)\\
+<callout type="tip" icon="true">
+  * The expansion of Admin Item Settings to universal setting of the Custom Level will influence the Admin Menu Settings.
+  * The Account button can now be visible to all users that have administrator privilege as opposed to the previous versions in which only the default administrator(with User ID: 1) had privilege to access this feature.
+  * If you are upgrading from previous versions to BioStar 2.6.3, you need to perform migration on the Custom Level
+  * The Administrator will receive alert regarding Custom Level activities
+</callout>
+To see an example of this change please refer to [[en:how_to_configure_a_custom_level_example_for_2.6.3|]]
+Up to BioStar 2.6.2, Admin Item Settings were only limited to Monitoring section as in the screenshot below.\\
+{{:en:biostar2_custom_level_2.png?nolink&1200|}} \\
+===== BioStar version 2.4 and above =====
+In BioStar version 2.4, the custom level was further expanded to allow custom levels that controls specific users, devices, doors, and access groups. \\
+{{:en:2xtraining_custom_admin_007_.png?nolink&800|}} \\
+However, be aware that the custom items only apply to its specific menu. \\
+This means that even if you apply a specific user in the **User** menu item and specific devices in the **Device** menu item, the custom operator will see //all// logs of devices and users in the **Monitoring** menu because the settings do not apply other menus.
+<callout type="warning" icon="true">
+**Known Issue** \\
+You can only add new custom levels with the default administrator (ID 1) account in BioStar 2.4. \\
+Refer to the following link: [[http://support.supremainc.com/support/discussions/topics/24000001177|Freshdesk Known Issue Forum]]
+</callout>
-{{:en:2xtraining_custom_admin_001.png?nolink&500|}}
-\\ \\
 ===== BioStar version 2.3 =====
 In BioStar 2.3, the feature to create custom administrators was introduced. You can add a custom administrator at **Settings** > **ACCOUNT**. \\
@@ Line 32: / Line 70: @@
 {{:en:2xtraining_custom_admin_006.png?nolink&400|}} \\
-===== BioStar version 2.4 and above =====
+===== Before versions before 2.3 =====
-In BioStar version 2.4, the custom level was further expanded to allow custom levels that controls specific users, devices, doors, and access groups. \\
+Before the release of BioStar 2.3, there were only 4 operator levels for users. There functions were limited to their roles as shown below: \\
+  - 	Administrator : full privileges over all operations
+  - 	User Operator : only full privileges to edit users
+  - 	Monitoring Operator : only full privileges over the monitoring page
+  - 	Mobile User : only privilege to read all menus.
-{{:en:2xtraining_custom_admin_007_.png?nolink&800|}} \\
+{{:en:2xtraining_custom_admin_001.png?nolink&500|}}
+\\ \\
-However, be aware that the custom items only apply to its specific menu. \\
-This means that even if you apply a specific user in the **User** menu item and specific devices in the **Device** menu item, the custom operator will see //all// logs of devices and users in the **Monitoring** menu because the settings do not apply other menus.
-<callout type="warning" icon="true">
-**Known Issue** \\
-You can only add new custom levels with the default administrator account in BioStar 2.4. \\
-Refer to the following link: [[http://support.supremainc.com/support/discussions/topics/24000001177|Freshdesk Known Issue Forum]]
-</callout>