Differences

This shows you the differences between two versions of the page.

--- en:how_to_configure_a_custom_level [2018/10/02 14:09]
conan
+++ en:how_to_configure_a_custom_level [2018/10/11 08:22]
conan
@@ Line 6: / Line 6: @@
 ===== BioStar version 2.6 and above =====
 Custom level configuration for the monitoring section has been expanded. \\
-Refer to [[en:how_to_configure_custom_admin_about_monitoring_section|]] \\
-- for BioStar 2.6.3 and above please refer to "*From BioStar 2.6.3" \\
+From BioStar 2.6.3, the Admin Item Setting is changed so that a custom level can be assigned for a specific User Group, Device Group, Door Group, and Access Group. Also Monitoring menu is now allowing the administrator to assign "Read" rights. \\
-- for BioStar 2.6.2 and below please refer to "*Up to BioStar 2.6.2" \\
+. Go to the **Settings** > **ACCOUNT**. \\
+{{:en:biostar2_custom_level_1.png?nolink&800|}} \\ \\
+. Create new Custom Level. At this point, you can configure the item settings and menu settings. \\
+{{:en:custom_level_-_2.6.3.png?nolink&1000|}}
+{{:en:monitoring_-_2.6.3.png?nolink&1000|}}
+  * Real-time Logs and event logs are filtered based on below condition.
+<callout type="tip" icon="true">
+Selected User Group **AND** Device Group (excluding Access Group Status).
+</callout>
+  * Door Status is displayed based on selected Door Group.
+  * Device Status is displayed based on selected Device Group or Device ID.
+  * User Status is displayed based on selected User Group
+  * Event Status is displayed based on selected Event
 ===== BioStar version 2.4 and above =====