Differences

This shows you the differences between two versions of the page.

--- en:how_to_configure_a_custom_level [2018/10/02 14:09]
conan
+++ en:how_to_configure_a_custom_level [2022/11/01 14:56]
sungjun
@@ Line 2: / Line 2: @@
 ====== How to Configure a Custom Level ======
 The custom level feature allows you to give specified privileges to administrators in specific menus.
 ===== BioStar version 2.6 and above =====
-Custom level configuration for the monitoring section has been expanded. \\
+From BioStar 2.6.3, the Admin Item Setting is changed so that a custom level can be assigned for a specific User Group, Device Group, Door Group, and Access Group. Also Monitoring menu is now allowing the administrator to assign "Read" rights. \\
-Refer to [[en:how_to_configure_custom_admin_about_monitoring_section|]] \\
-- for BioStar 2.6.3 and above please refer to "*From BioStar 2.6.3" \\
+. Go to the **Settings** > **ACCOUNT**. \\
-- for BioStar 2.6.2 and below please refer to "*Up to BioStar 2.6.2" \\
+{{:en:biostar2_custom_level_1.png?nolink&800|}} \\
+. Create new Custom Level. At this point, you can configure the item settings and menu settings. \\
+{{:en:custom_level_-_2.6.3.png?nolink&1000|}} \\
+You can also see now that the Monitoring Admin Menu Setting allows "Read" assignment.\\
+**Admin Item Settings** includes User Group, Device Group, Door Group, and Access Group(including Elevator Group). \\
+Each item can be configured for each group or for all groups. \\
+**Admin Menu Settings** consists of Dashboard, User, Device, Door, Elevator, Zone, Access Control, Monitoring, Time and Attendance, Setting, and Video categories. \\
+For each menu you can set "Edit" and "Read" privileges. \\
+When checking "Edit" it will automatically check "Read." \\
+Depending on such privilege settings, "Add Button" column value will be changed (N/A, Disabled, or Enabled)\\
+<callout type="tip" icon="true">
+  * The expansion of Admin Item Settings to universal setting of the Custom Level will influence the Admin Menu Settings.
+  * The Account button can now be visible to all users that have administrator privilege as opposed to the previous versions in which only the default administrator(with User ID: 1) had privilege to access this feature.
+  * Up to BioStar 2.6.2, custom level administrators could not receive alerts but they can now receive alerts in BioStar 2.6.3 and above.
+</callout>
+To see an example of this change please refer to [[en:how_to_configure_a_custom_level_example_for_2.6.3|]]
+Up to BioStar 2.6.2, Admin Item Settings were only limited to Monitoring section as in the screenshot below.\\
+{{:en:biostar2_custom_level_2.png?nolink&1200|}} \\
 ===== BioStar version 2.4 and above =====
@@ Line 54: / Line 79: @@
 {{:en:2xtraining_custom_admin_001.png?nolink&500|}}
 \\ \\
+{{ :en:how_to_configure_a_custom_level.mp4?900x506 |}} \\