Differences

This shows you the differences between two versions of the page.

--- en:how_to_configure_a_custom_level [2018/10/11 10:27]
conan
+++ en:how_to_configure_a_custom_level [2018/10/11 10:55]
conan
@@ Line 13: / Line 13: @@
 {{:en:custom_level_-_2.6.3.png?nolink&1000|}} \\
-You can see now that the Monitoring Admin Menu Setting allows "Read" assignment.\\
+**Admin Item Settings** includes User Group, Device Group, Door Group, and Access Group(including Elevator Group).
+Each item can be configured for each group or for all groups. \\
+**Admin Menu Settings** consists of Dashboard, User, Device, Door, Elevator, Zone, Access Control, Monitoring, Time and Attendance, Setting, and Video categories. \\
+For each menu you can set "Edit" and "Read" privileges.
+When checking "Edit" it will automatically check "Read."
+Depending on such privilege settings, "Add Button" column value will be changed (N/A, Disabled, or Enabled)\\
-Up to BioStar 2.6.2, Admin Item Settings were only limited to Monitoring section as in the screenshot below.\\
+You can also see now that the Monitoring Admin Menu Setting allows "Read" assignment.\\
-{{:en:biostar2_custom_level_2.png?nolink&1200|}} \\
 <callout type="tip" icon="true">
@@ Line 25: / Line 28: @@
   * The Administrator will receive alert regarding Custom Level activities
 </callout>
+Up to BioStar 2.6.2, Admin Item Settings were only limited to Monitoring section as in the screenshot below.\\
+{{:en:biostar2_custom_level_2.png?nolink&1200|}} \\
 ===== BioStar version 2.4 and above =====