Differences

This shows you the differences between two versions of the page.

--- en:how_to_configure_a_custom_level [2018/10/11 11:01]
conan
+++ en:how_to_configure_a_custom_level [2018/10/19 13:25]
conan
@@ Line 13: / Line 13: @@
 {{:en:custom_level_-_2.6.3.png?nolink&1000|}} \\
-**Admin Item Settings** includes User Group, Device Group, Door Group, and Access Group(including Elevator Group).
+You can also see now that the Monitoring Admin Menu Setting allows "Read" assignment.\\
+**Admin Item Settings** includes User Group, Device Group, Door Group, and Access Group(including Elevator Group). \\
 Each item can be configured for each group or for all groups. \\
 **Admin Menu Settings** consists of Dashboard, User, Device, Door, Elevator, Zone, Access Control, Monitoring, Time and Attendance, Setting, and Video categories. \\
-For each menu you can set "Edit" and "Read" privileges.
+For each menu you can set "Edit" and "Read" privileges. \\
-When checking "Edit" it will automatically check "Read."
+When checking "Edit" it will automatically check "Read." \\
 Depending on such privilege settings, "Add Button" column value will be changed (N/A, Disabled, or Enabled)\\
-**Dashboard** only allows "Read" privilege and its "Add Button" will show "N/A" status. \\
-When the "Read" is checked the dashboard will be shown when you log in to BioStar 2. \\
-Depending on Admin Item Settings, dashboard use status is not supported but is shown by the number of use status according to Admin Menu Settings.
-You can also see now that the Monitoring Admin Menu Setting allows "Read" assignment.\\
 <callout type="tip" icon="true">
   * The expansion of Admin Item Settings to universal setting of the Custom Level will influence the Admin Menu Settings.
-  * The Account button can only be visible to the Administrator.
+  * The Account button can now be visible to all users that have administrator privilege(as opposed to the previous versions in which only the main administrator had privilege to access this feature)
   * If you are upgrading from previous versions to BioStar 2.6.3, you need to perform migration on the Custom Level
   * The Administrator will receive alert regarding Custom Level activities
 </callout>
+To see an example of this change please refer to [[en:how_to_configure_a_custom_level_example_for_2.6.3|]]
 Up to BioStar 2.6.2, Admin Item Settings were only limited to Monitoring section as in the screenshot below.\\
 {{:en:biostar2_custom_level_2.png?nolink&1200|}} \\
 ===== BioStar version 2.4 and above =====