Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
en:bep2_revision_note_141 [2021/06/01 08:17]
chloe created
en:bep2_revision_note_141 [2021/06/01 12:55] (current)
chloe
Line 1: Line 1:
-===== Version 1.4.1 (V1.4.1_210412) =====+===== Version 1.4.1 (V1.4.1_210511) =====
 ==== Release ==== ==== Release ====
-2021-04-12+2021-06-01
 \\ \\
  
Line 26: Line 26:
  
 <text size="​large">​6.</​text>​ Fingerprint authentication did not work after downgrading from firmware version 1.4.0 to firmware version 1.2.1. (Affects version: v1.4.0) \\ <text size="​large">​6.</​text>​ Fingerprint authentication did not work after downgrading from firmware version 1.4.0 to firmware version 1.2.1. (Affects version: v1.4.0) \\
-<text size="​large">​7.</​text>​ It was not able to communicate with a 3rd-party controller via OSDP with the default key before network initialization. (only for devices released with the firmware version 1.4.0 or later) (Affects version: v1.0.0) \\+<text size="​large">​7.</​text>​ It was not able to communicate with a 3rd-party controller via OSDP with the default key before network initialization. (only for devices released with the firmware version 1.4.0 or later) (Affects version: v1.4.0) \\
 <text size="​large">​8.</​text>​ It was able to communicate using default keys after changing the key settings when the device was connected to a 3rd-party device via OSDP. (Affects version: v1.3.0) \\ <text size="​large">​8.</​text>​ It was able to communicate using default keys after changing the key settings when the device was connected to a 3rd-party device via OSDP. (Affects version: v1.3.0) \\
 <text size="​large">​9.</​text>​ After initializing the slave device’s settings, it was not able to connect it to a 3rd-party controller. (Affects version: v1.0.0) \\ <text size="​large">​9.</​text>​ After initializing the slave device’s settings, it was not able to connect it to a 3rd-party controller. (Affects version: v1.0.0) \\
 +<text size="​large">​10.</​text>​ Secure communication was not available by using the default key after downgrading firmware to version 1.3.1 or below which does not support encryption. (Affects version: v1.4.0) \\