2018-03-26

1. Support Muster zone.
2. Support Reset without Network Settings.
3. Support Daylight Saving Time setting.
4. Improves Trigger & Action for duress finger.
5. Support Private Authentication on AoC.
6. Improves to handle the encryption key of the important information stored in database differently from server to server.
7. Support One Device Mode(Legacy).
8. Added a message asking whether to delete the fingerprint in the database after completing AoC issuance.
9. Support the secure tamper.
10. Support ISO14443A 10 Byte CSN.
11. Support connecting with BioLite N2, XPass D2.

1. iCLASS 2K card can not be issued as a smart card.

2. Problem with reading mobile smart cards on Galaxy S4.
3. Galaxy S5 NFC is recognized as a CSN card when authenticating with NFC and the authentication fails.
4. Issue that does not work when template size is set to 384 bytes when issuing NFC card.
5. Fixed that Hard APB authentication failure notification is distinguished from general authentication failure notification.
6. Issue where the device can not read HID Prox II card.
7. Fixed to generate buzzer or sound when starting the intrusion alarm.
8. Problem that delay time of Action Signal Output is not applied in the slave device.
9. Fixed to the device operates in the input waiting state until the authentication time is exceeded when a Wiegand card that is different from the Wiegand format set in the device is input after Arm / Disarm card input.
10. Problem where the response rate was slow when Arm / Disarm occurred.
11. Fixed to Entrance Limit Soft log to be recorded when authentication exceeds the allowed number.