2019-09-19

1. Improved the speed at which the device recognizes 13.56 MHz cards.

1. The device recognizes the DESFire(Adv) card as a CSN if the device is restarted when the smart card layout set as DESFire(Adv).

2. When using firmware V1.3.0 the connection to the I/O device that using the firmware version below is lost.

• DM-20 FW V1.1.2
• OM-120 FW V1.0.0
• Secure I/O 2 FW V1.2.1

3. The device restarts if a user authenticates a fingerprint on the device set as below.

• Byte Order: LSB
• Wiegand Out: User ID

4. After a user scans and registers a card on a device set as Wiegand Out device, if an existing user authenticates with a credential other than the card, the Wiegand output will behave abnormally.

5. The master device intermittently reboots when upgrading the firmware of the slave device.