2022-01-25

1. Improved to transmit entire card data, including the parity bit, when a user authenticated the fingerprint while the Wiegand card was registered.

1. The card ID was always output as MSB through OSDP when the card ID is input while the device was connected by an intelligent slave (Affects version: v1.4.1).
2. The user ID was abnormally displayed in the event log if the user authenticated with AoC set as the blacklist card when the User ID Type was set to Alphanumeric (Affects version: v1.0.0).
3. The device failed to recognize the iCLASS Seos card intermittently before rebooting the device (BEP2-OA) (Affects version: v1.0.0).
4. When the device is connected as an intelligent slave and the first card registered to the user is a Wiegand card of a format other than 26-bit, the CSN value is output through OSDP when authenticated with the user's fingerprint (Affects version: v1.4.1).
5. The fingerprint sensor was deactivated after upgrading the firmware to v1.4.2 and it was reactivated only when the device is restarted (Affects version: v1.4.2).