Table of Contents

Version 1.8.2 (V1.8.2_241025)

Release

2024-11-01

Devices with the new SE processor cannot downgrade to a lower version after upgrading the firmware to v1.7.1 or later.
Devices with existing SE processor can be downgraded to a lower version.
For more information, check the serial number of the device and contact the Suprema. (https://supremainc.com)


New Features and Improvements

1. Improved to not recognize SEOS configuration cards as CSN for 1 minute after device booting.

Bug Fixes

1. When the device is restarted with the Primary Key set only in the Suprema Smart Card Layout and the Secondary Key set only in the Custom Smart Card Layout, the device recognizes the Custom Smart Card as a CSN card. (Affects version: v1.8.0)

2. Some devices fail to boot after a firmware upgrade. (Affects version: v1.5.0)

3. Some cards are recognized differently from the settings in the Suprema Smart Card option. (Affects version: v1.4.1)

4. Custom Smart Card Layout set through Batch Edit is not applied on the device detail page. (Affects version: v1.8.0)

5. When the device log is full and a new event occurs, unintended logs are retrieved with the newly generated event. (Affects version: v1.7.0)

6. When the Time Synchronization with Server option is disabled and the device time is changed, the device restarts abnormally. (Affects version: v1.0.0)

7. Some smart cards fail to be recognized in environments using the new SE chip firmware. (Affects version: v1.7.1)

8. DESFire smart cards with the Custom Smart Card Layout set to Secondary Key are recognized as CSN cards. (Affects version: v1.8.0)

9. Custom Smart Card option does not appear on the device detail page when RS-485 mode is set to Slave. (Affects version: v1.8.0)

10. Custom smart cards with the DESFire Advanced option enabled fail to be recognized. (Affects version: v1.8.0)