2021-02-16

1. Suprema Thermal Camera (TCM10-FS2) SDK Revision

• FPS 8.3 applied
• The management service is separated to recover the system safely after the device stops working abnormally.
• The infrared image motion stopped working or the device was restarted while using the thermal camera.
• The specifications of captured image buffer were modified.

2. Renamed the thermal camera's feature. (English only)

• Before: Emission Rate
• After: Emissivity

1. Disconnected logs frequently occurred when the device was used with Secure I/O 2. (Affects version: v.1.4.0 or earlier)
2. Doors were not applied in the open state when the device was restarted with the door set to manual open mode. (Affects version: v.1.4.0)
3. The Secure Tamper could not be manually turned off by the default hash key. (Affects version: v.1.4.0)