2024-12-09
1. Changes to a new LCD screen.
1. After a firmware upgrade, authentication failure occurs with the previously used cards. (Affects version: v2.2.0)
2. When using Thermal Camera mode with the TCM10 connected, the face authentication screen is displayed abnormally. (Affects version: v2.0.1)
3. Custom smart cards with the DESFire Advanced option enabled fail to be recognized. (Affects version: v2.2.0)
4. Some smart cards fail to be recognized in environments using the new SE chip firmware. (Affects version: v2.1.4)
5. The Mask All but First Letter option in the Auth Result Display Option is not applied correctly. (Affects version: v2.2.0)
6. After transferring more than 50,000 users with 1:N credentials to the device and then upgrading the firmware, the device freezes. (Affects version: v2.1.1)
7. When a user with more than two cards enrolled attempts card authentication to the Wiegand output device, the ID of a card other than the authenticated card is output. (Affects version: v2.1.1)