2018-07-25

1. In a device with an LCD, the user name is displayed on the LCD when authentication is successful even when connected in slave mode.
2. Support for connecting new devices.

• XPass D2(XPD2-GDB, XPD2-GKDB)

1. The bypass does not work when authentication with AoC in Wiegand output.

2. Event logs and real-time logs are not uploaded normally to BioStar 2.
3. The relay state is not maintained when reconnecting a device connected by RS-485.
4. The time zone is not initialized even if the factory reset is performed while secure communication and data encryption key are in use.
5. The relay operates according to previous value after reconnection of the device if the authentication is successful when the device set as door relay is disconnected.
6. The device restarts when authentication fails.
7. The RF module of the device gets damaged when using a 13.56 MHz card.