2019-08-16

1. OSDP Standardization

• Improved to comply with OSDP V2.1.7 protocol when connecting with 3rd-party controllers.

2. Increase of the number of administrators that can be added.
3. Support to the Clear APB for each user.
4. Supports options by card type.
5. Increase of the maximum number of floor levels to up to 2,048.
6. Change the way new settings are applied when adding administrators using batch edit of devices.

• Before: Overwrite a new setting to existing settings.
• After: Add a new setting to existing settings.

7. Supports the duplicate face check when registering users on a device.
8. Supports setting options for Wiegand authentication result output.

• User ID and Card ID

9. Supports Anti-Tailgating at doors.

10. If the data transmission fails when communicating with OSDP, it is transmitted again.

11. Improves the Enhanced fake face enrollment block.
12. Support for RS-485 connections to new devices

• XPass 2(XP2-MDPB, XP2-GDPB, XP2-GKDPB)

1. The master device abnormally shuts down if it is operated after reconnecting a disconnected slave device.

2. The master device reboots abnormally when a user authenticates the face to the slave device continuously.
3. The master device abnormally shuts down if the RS-485 mode of the master device is changed after disconnecting the 31 connected slave devices.

1. If the value of menu timeout is shorter than the auth timeout, a pop-up for success or fail does not occur when an T&A pop-up message is output after authentication.
2. 64GB exFAT USB memory device is not recognized normally.
3. The device does not recognize AoC authentication.